A resistorless high-precision compensated CMOS bandgap voltage reference (BGR), which is compatible with a standard CMOS process, is presented in this paper. A higher-order curvature correction method called base-emitter voltage linearization is adapted to directly compensate the thermal nonlinearity of base-emitter voltage. With proper mathematical operations of high-order temperature currents, most of the nonlinear temperature terms in VBE can be greatly eliminated. The proposed BGR, which is implemented in 0.35-μm CMOS technology, is capable of working down to 2 V supply voltages with 1.14055 V mean output voltage. A minimum temperature coefficient of 1.01 ppm/°C with a temperature range from -40 °C to 125 °C is realized, and a power-supply noise attenuation of 61 dB is achieved without any filter capacitors. The line regulation is better than 2 mV/V from 2 V to 5 V supply voltage while dissipating a maximum supply current of 33 μA. The active area of the presented BGR is 180 μm x 220 μm.
24 February 2021 in IEEE Transactions on Power Electronics
In high-frequency gate drivers, especially for wide-bandgap applications, hundreds of voltages per nanosecond noise would be generated. Therefore, the sub-ns delay level shifter with high dV/dt immunity is necessary for signal conversion among different voltage domain areas. This article presents design techniques for the sub-ns delay level shifter with ultrahigh dV/dt immunity. The propagation delay of the proposed floating level shifter is dramatically reduced by utilizing the edge detection technique. In order to further improve the performance, auxiliary pull-up circuit, promoting delay matching, and self-calibration techniques are adopted, which make the proposed level shifters more suitable for high-frequency wide-bandgap applications. The level shifter is fabricated in a 0.5 μm bipolar CMOS DMOS (BCD) process, whose results demonstrate the final level shifter achieves zero static power consumption, a 0.024 mm 2 active area, and dV/dt immunity up to 250 V/ns. The measurement results show that the sub-ns delay level shifter can be realized, and the minimum delay is only 664 ps at VSSH 25 V. Its figure of merit is just 0.044 ns/(μm × V), which is optimal among previous level shifters. The level shifters are also simulated at the 0.18 μm BCD process, and the propagation delay can be decreased by more than 60%.
In this paper, a nano-watt resistorless subthreshold voltage reference with high-power supply rejection ratio (PSRR) is presented. A self-biased MOS voltage divider is proposed to provide bias current for whole voltage reference, which is a positive temperature coefficient (TC) current containing threshold voltage characteristics. By injecting the generated current into a transistor with a different threshold voltage, a delta threshold voltage with a greatly reduced negative TC is realized and temperature-compensated by a generated positive TC item at the same time. Therefore, a temperature-stable voltage reference is achieved in the proposed compacted method with low power consumption and high PSRR. Verification results with 65-nm CMOS technology demonstrate that the minimum supply voltage can be as low as 0.35 V with a 0.00182-mm2 active area. The generated reference voltage is 148 mV, with a TC of 28 ppm/°C for the − 30 to 80 °C temperature range. The line sensitivity is 1.8 mV/V, and the PSRR without any filtering capacitor at 100 Hz is 53 dB with a 2.28-nW power consumption.
17 July 2023 in IEEE Transactions on Power Electronics
A novel solid-state circuit breaker with robust breaking capability and high efficiency is proposed for low-voltage dc microgrid protection. Firstly, the proposed SSCB makes the commutation current flow inside the breaker. Thus, it can interrupt faults without reflecting current surges to sources or loads and effectively protect them. Secondly, by introducing the voltage clamping circuit, the proposed SSCB provides strong fault interruption capability even when encountering large parasitic parameters in microgrids. Thirdly, the proposed SSCB provides fast reclosing and re-breaking capability due to the auto-recharging of the commutation capacitor. Lastly, the reverse voltage stress of the main power switch is greatly reduced through the magnetic coupling of the coupled inductor. As a result, the insulated gate triggered thyristor with field-stop layer (FS-IGTT) which features ultra-low conduction loss and asymmetric blocking capability is designed and fabricated. By introducing FS-IGTT as the main power switch, the conduction loss of the proposed SSCB is reduced by 26% compared with SSCBs which use non-punch-through type IGTTs (NPT-IGTTs). In this paper, the detailed operation of the proposed SSCB is discussed, and the design guidelines are presented through mathematical modeling. Moreover, a 400 V/4 kW laboratory prototype is built to verify the effectiveness of the proposed SSCB.
In this paper, an improved self-biased bandgap reference (BGR) with high power supply rejection ratio (PSRR) is presented. An operational amplifier constructing feedback loop is multiplexed with the generation of positive temperature coefficient (TC) voltage for lower power consumption, where an offset voltage is adopted to achieve proportional to absolute temperature (PTAT) voltage. With the temperature-independent reference generation, two feedback loops are realized at the same time for PSRR enhancement, which form a local negative feedback loop (LNFL) and a global self-biased loop (GSBL). The proposed BGR is implemented in a 180 nm BCD technology, whose results show that the generated reference voltage is 2.506 V, and the TC is 25 ppm/°C in the temperature range of −55 to 125 °C. The line sensitivity (LS) is 0.08 ‰/V. Without any filter capacitor, the PSRR is 76 dB at low frequencies, over 46 dB up to 1 MHz.
An optoelectronic circuit integrated with a photodiode is proposed, which simultaneously achieves 3.5 MΩ transimpedance gain and 18 MHz bandwidth. The design is intended to address the limits on bandwidth introduced by the large parasitic capacitance of integrated photodiodes in optoelectronic applications. The proposed circuit consists of a transimpedance amplifier (TIA) and a voltage gain stage. The pre-stage TIA with low input impedance provides the main transimpedance gain of the circuit over a wide bandwidth. The post voltage gain stage provides supplemental voltage gain for the circuit and increases its driving capability. The circuit is fabricated in a 0.5 μm CMOS process with an active area of 501.2 μm × 291.6 μm. When the light input is a 100 ns pulse with 905 nm wavelength and 1.5 μW optical power, the amplitude of output signal is 1.6 V, with a rise time of 24.5 ns and a delay time of 21 ns.