The human hand interacts with the environment via physical contact, and tactile information is closely associated with finger movement patterns. Studying the relationship between motor primitives of the finger and the corresponding tactile feedback provides valuable insight into the nature of touch and informs the simulation of humanoid tactile. This research decomposed finger contact into three fundamental motor primitives: contact-on, stick-to-slip, and full slip, then examined the tactile features associated with each motor primitive, including the center of mass (COM) and the centroid of the contact pressure distribution matrix and the total contact area. The change in fingertip contact area during contact-onwas in accordance with a first-order kinetic model. In the stick-toslip, there was a generalized linear relationship between the fingertip skin stretch and the magnitude of the tangential force. Moreover, the skin stretch of the fingertip mirrored the direction of the motion. During the full slip, the COM's movement effectively represented the direction of the tangential force, with an error margin of no more than five degrees. Experiments showed that certain fingertip motions can be portrayed, transmitted, and replicated using tactile information. This research opens potential avenues for remote immersive physical communication in robotics and other related fields
11 May 2026 in IEEE Transactions on Instrumentation and Measurement
Understanding human intentions based on tactile sensing is pivotal for enabling seamless and intuitive human-robot interaction (HRI). By interpreting physical contact, robots can infer human goals, adjust their behavior in real time, and enhance collaboration in shared environments. However, robots cannot fully understand human intent solely from tactile information and often need to rely on other modalities, such as vision. The tactile information generated by finger contact is intrinsically linked to the corresponding motion. Hence, this paper presents a method that estimates human finger motion directly from tactile features obtained during fingertip contact. Motion parameters are represented by finger poses, and tactile features are extracted as contact area, contact position, etc. A linear model is first proposed to describe the relationship between the contact angle and the contact area. To account for the effect of contact forces on the linear relationship, a three-layer structure model (TLSM) of the finger is introduced to characterize the relationship between contact force and contact area. Combining the two models, the contact angle can be estimated. Then, a local pressure center (LPC) algorithm is proposed to determine the contact position of the fingertip. Finally, inverse kinematics is applied to estimate joint angles and reconstruct finger poses. This work developed a method for estimating finger poses via tactile features, which could enhance the perceptual capabilities of robotic systems and be suitable for human-robot interaction.
Tactile sensing is an important perceptual modality that enables robots to understand human contact behaviors. Estimating the fingertip contact angle based on tactile pressure distribution provides a simplified representation of the finger’s contact configuration and supports tactile-based perception in human–robot interaction. However, the relationship between tactile pressure distributions and fingertip contact configuration remains insufficiently understood. In this study, a simplified contact mechanics model was employed to investigate the relationship between tactile pressure characteristics and fingertip contact conditions. Theoretical analysis indicates that both the contact area and the contour dimensions of the pressure distribution are influenced by the contact angle and contact force, with varying sensitivities in different directions to these factors. Based on this theory, simplified finite element modeling of the fingertip and multi-subject experiments were conducted. The deformation behavior of the contact region under different contact angles and contact forces was analyzed. The experimental results were generally consistent with the theoretical analysis. Furthermore, contour descriptors were extracted from the tactile pressure distribution to establish a relationship model for estimating the fingertip contact angle, and the model’s accuracy was analyzed. The experimental results indicate that the extracted contour features exhibit systematic variations with contact angle, and the proposed method achieves a mean absolute error (MAE) of 2.73° and a root mean square error (RMSE) of 7.25°. These results demonstrate that tactile pressure contours provide an effective and computationally efficient cue for estimating fingertip contact configuration. This approach may help robots understand human behavior and has potential applications in human–robot interaction and robotic grasping.