With the advancement of monopulse radar technology, synthesis of the sum-and-difference patterns (SDPs) for the radome-enclosed arrays has emerged as a pressing area of research. Due to the influence of asymmetric radome, active element patterns of the radome-enclosed linear array (RELA) are completely different. To accurately consider the array-element mutual couplings and array-and-radome interactions, a novel simultaneous synthesis technique for low sidelobe level (SLL) SDPs of the RELA with common weights is proposed. Firstly, a non-convex SDP synthesis problem with the non-convex constraint and the non-convex objective function is established. Then, by fixing the reference phases for the sum pattern (SP) radiation far-field and the difference pattern (DP) slope at the target direction, the original non-convex synthesis problem is transformed into a convex minimum problem, which can be efficiently solved by the convex optimization methods. Finally, a 40-element RELA is implemented, demonstrating that the proposed synthesis technique can be used to simultaneously synthesize SDPs of the RELA with asymmetric active element patterns. The SPs with -25 dB SLL and the DPs with -20 dB SLL are simultaneously synthesized, and the obtained results verify effectiveness of the proposed synthesis technique.
1 May 2026 in IEEE Transactions on Antennas and Propagation
Simultaneous synthesis of array sum-and-difference patterns (SDPs) with reduced dynamic range ratio (DRR) of element excitation weights is of great importance. In this communication, a novel method for simultaneously synthesizing the SDPs of planar arrays with common weights and minimum DRR is proposed. First, a new non-convex problem for minimizing the DRR while simultaneously synthesizing the low-sidelobe SDPs of planar arrays is established. Then, some mathematical transformations in terms of DRR are implemented, and the fractional DRR objective function is approximated as a linear convex function by the first-order Taylor expansion. By fixing reference phases of the main-beam radiation power and two difference pattern slopes, the non-convex constraints are transformed into convex ones. As a result, the original non-convex problem is decomposed into a sequence of convex subproblems, which are efficiently solved by the convex optimization solver. Additionally, to ensure convergence of the iterative method, a novel initialization strategy is developed to generate a feasible solution, and an adaptive selection strategy for the weight upper bound is also adopted. Finally, three examples, including the symmetric, asymmetric, and radome-enclosed planar arrays, are synthesized to demonstrate superiority of the proposed method in achieving the small-DRR SDP synthesis while satisfying radiation requirements.
High-performance difference patterns (DPs) are critical for compact and integrated microwave array systems, particularly in monopulse tracking and beam-scanning applications. However, the design of monopulse phased arrays with steep slopes, high directivity, low sidelobes, and symmetric main lobes remains challenging due to constraints imposed by the array aperture and radome structure. In this paper, a novel design method is proposed to maximize the DP directivities for monopulse linear and planar phased arrays composed of microstrip patch antennas. The DP synthesis problem is first formulated as a nonconvex optimization model for directivity maximization. By fixing the reference phase of the DP slope and applying a first-order Taylor expansion of the quadratic function, the original problem is decomposed into a sequence of convex subproblems that can be solved efficiently. The proposed method fully exploits the flexibility of the phased array feed network, enabling directivity enhancement without altering the geometric configuration of the monopulse array. Finally, three numerical examples employing a radome-enclosed linear array, a uniform planar array, and a radome-enclosed planar array are presented to demonstrate the effectiveness of the proposed method in achieving the monopulse array DP synthesis with high directivity and symmetric main lobes.
High-performance difference patterns (DPs) are critical for compact and inte-grated microwave array systems, particularly in monopulse tracking and beam-scanning applications. However, the design of monopulse phased arrays with steep slopes, high directivity, low sidelobes, and symmetric main lobes remains challenging due to con-straints imposed by the array aperture and radome structure. In this paper, a novel design method is proposed to maximize the DP directivities for monopulse linear and planar phased arrays composed of microstrip patch antennas. The DP synthesis problem is first formulated as a nonconvex optimization model for directivity maximization. By fixing the reference phase of the DP slope and applying a first-order Taylor expansion of the quad-ratic function, the original problem is decomposed into a sequence of convex subproblems that can be solved efficiently. The proposed method fully exploits the flexibility of the phased array feed network, enabling directivity enhancement without altering the geo-metric configuration of the monopulse array. Finally, two numerical examples employing a radome-enclosed linear phased array and a uniform planar phased array are presented to demonstrate effectiveness of the proposed method in achieving the monopluse array DP synthesis with high directivity and symmetric main-lobes.
1 January 2026 in IEEE Transactions on Antennas and Propagation
Sparse antenna arrays are attractive for compact microwave and millimeter-wave front ends because they can achieve prescribed radiation performance with fewer radiating elements, thereby reducing the number of feeding channels, hardware cost, weight, and power consumption. However, the joint optimization of element positions and complex excitations remains challenging, since the element positions enter the array factor nonlinearly and the element-count objective is inherently combinatorial. This paper presents an iterative reweighted ℓ1 synthesis framework for sparse antenna arrays with continuous element positions. At each iteration, position perturbations are introduced and the array factor is linearized using a first-order Taylor expansion within a trust region. The resulting non-convex sparse synthesis problem is then approximated by convex programing through an iteratively reweighted ℓ1 relaxation, allowing the excitation amplitudes, phases, and element positions to be updated simultaneously. Additional aperture, minimum-spacing, and minimum-directivity requirements are formulated as convex constraints and incorporated when required, enabling joint control of sparsity, sidelobe level, physical layout, and radiation performance. The proposed method is validated through four representative examples, including a shaped-beam linear array, a tri-pattern reconfigurable linear array, a planar pencil-beam array, and a directivity-constrained planar array. Compared with fixed-grid reweighted ℓ1 methods under the same specifications, the proposed approach produces sparser layouts while avoiding the grid-resolution limitation. In the directivity-constrained benchmark, it also achieves competitive element reduction while enforcing a prescribed minimum element spacing. These results indicate that the proposed framework provides a flexible and practical synthesis tool for compact and integrated sparse antenna-array design.