In this study, a laser line auto-scanning system was designed to perform underwater close-range 3D reconstructions with high accuracy and resolution. The system changes the laser plane direction with a galvanometer to perform automatic scanning and obtain continuous laser strips for underwater 3D reconstruction. The system parameters were calibrated with the homography constraints between the target plane and image plane. A cost function was defined to optimize the galvanometer’s rotating axis equation. Compensation was carried out for the refraction of the incident and emitted light at the interface. The accuracy and the spatial measurement capability of the system were tested and analyzed with standard balls under laboratory underwater conditions, and the 3D surface reconstruction for a sealing cover of an underwater instrument was proved to be satisfactory.

A handheld 3D laser scanning system is proposed for measuring large-sized objects on site. This system is mainly composed of two CCD cameras and a line laser projector, in which the two CCD cameras constitute a binocular stereo vision system to locate the scanner’s position in the fixed workpiece coordinate system online, meanwhile the left CCD camera and the laser line projector constitute a structured light system to get the laser lines modulated by the workpiece features. The marked points and laser line are both obtained in the coordinate system of the left camera in each moment. To get the workpiece outline, the handheld scanner’s position is evaluated online by matching up the marked points got by the binocular stereo vision system and those in the workpiece coordinate system measured by a TRITOP system beforehand; then the laser line with workpiece’s features got at this moment is transformed into the fixed workpiece coordinate system. Finally, the 3D information composed by the laser lines can be reconstructed in the workpiece coordinate system. A ball arm with two standard balls, which is placed on a glass plate with many marked points randomly stuck on, is measured to test the system accuracy. The distance errors between the two balls are within ±0.05 mm, the radius errors of the two balls are all within ±0.04 mm, the distance errors from the scatter points to the fitted sphere are distributed evenly, within ±0.25 mm, without accumulated errors. Measurement results of two typical workpieces show that the system can measure large-sized objects completely with acceptable accuracy and have the advantage of avoiding some deficiencies, such as sheltering and limited measuring range.

Compared with traditional unmanned aerial vehicle (UAV), the solar-powered UAV (SUAV) has longer endurance by converting solar energy into electric energy. This article focuses on the comprehensive optimization of energy storage and standoff tracking performance for SUAV with application to the target tracking task. First, an adjustable Lyapunov guidance vector field (ALGVF) is proposed and combined with the interfered fluid dynamical system (IFDS) method to achieve the standoff target tracking mission in obstacle environment, making it possible to adjust the tracking trajectory flexibly. Then, the adjustment factor of ALGVF and the obstacle reaction coefficients of IFDS are optimized simultaneously to generate the optimal trajectory of SUAV, aiming to maximize the solar energy storage while minimize the tracking error. Finally, the simulation results verify the feasibility of our method and give the influence of different solar irradiance on SUAV trajectory optimization.

In this letter, we present a novel rotation averaging pipeline, which is performed in a hierarchical manner. Unlike the traditional rotation averaging methods which focus on designing robust loss function to get rid of the impacts of the relative rotation outliers, here the outliers are detected and filtered by leveraging the well-known robust model estimation procedure, RANdom SAmple Consensus (RANSAC). During the RANSAC process, the minimal set is randomly sampled by random tree spanning on the Epipolar-geometry Graph (EG). As the RANSAC estimation result is sensitive to the size of minimal set, the EG is clustered into several sub-graphs, and the inner- and inter-cluster RANSAC-based rotation averaging are performed hierarchically. In addition, both random generation and optimal selection of the minimal set are performed in a weighted manner to make the rotation averaging pipeline more robust. Ablation studies and comparison experiments on the 1DSfM and San Francisco (SNF) datasets demonstrate the effectiveness of our proposed method.

Measuring and reconstructing the shape of workpieces have been considered as a fundamental step in both reverse engineering and product quality control. Owing to increasing structural complexity of recent products, measurements from multiple directions are typically required in current scanning techniques. Specifically, the plane structured light can be applied to measure one area of a part at a time, with an additional algorithm required to merge the collected data of each area. Alternatively, the line structured light sensor integrated on CNC machines or CMMs could also realize multi-view measurement. However, the system needs to be repeatedly calibrated at each new direction. This paper presents a flexible scanning method by integrating laser line sensors with articulated arm coordinate measuring machines (AACMM). Since the output of the laser line sensor is 2D raw data in the laser plane, our system model introduces an explicit transformation from the 2D sensor coordinate frame to the 3D base coordinate frame of the AACMM (i.e., the translation and rotation the of the 2D sensor coordinate in the sixth coordinate system of AACMM). To solve the model, the “conjugate pairs” are proposed and identified by measuring a fixed point (e.g., a sphere center). Moreover, a search algorithm is adopted to find the optimal solution, which noticeably boosts the model accuracy. The experimental results show that the error of the system is about 0.2 mm, which is caused by the error of the AACMM, the sensor error and the calibration error. By measuring a complicated part, the proposed system is proved to be flexible and facilitate, with the ability to measure a part expediently from any necessary direction. Furthermore, the proposed calibration method can also be used for robot hand-eye relationship calibration.

The non-uniform reflectance characteristics of object surfaces and underwater environment disturbances during underwater laser measurements can have a great impact on laser stripe center extraction. Therefore, we propose a normalized grayscale gravity method to address this problem. First, we build an underwater structured light dataset for different illuminations, turbidity levels, and reflective surfaces of the underwater object and compare several state-of-the-art semantic segmentation models, including Deeplabv3, Deeplabv3plus, MobilenetV3, Pspnet, and FCNnet. Based on our comparison, we recommend PSPnet for the specific task of underwater structured light stripe segmentation. Second, in order to accurately extract the centerline of the extracted light stripe, the gray level values are normalized to eliminate the influence of noise and light stripe edge information on the centroids, and the weights of the cross-sectional extremes are increased to increase the function convergence for better robustness. Finally, the subpixel-structured light center points of the image are obtained by bilinear interpolation to improve the image resolution and extraction accuracy. The experimental results show that the proposed method can effectively eliminate noise interference while exhibiting good robustness and self-adaptability.