Neighbor discovery in underwater acoustic networks (UANs) faces challenges of high propagation delay, high energy consumption, and constrained spectral resources. This study proposes a multiplexed directional transceiver neighbor discovery (MDT-ND) protocol that enhances discovery efficiency through adaptive space–time–frequency multiplexing. In the a priori detection phase, an initial omnidirectional broadcast rapidly captures coarse-grained parameters of neighboring nodes, including distance, direction, and activity state. For partially discovered nodes, the transmit power is adaptively adjusted to continue the discovery process. Meanwhile, nodes that remain undiscovered automatically adjust their receive gain. In the cognitive detection phase, the primary node dynamically allocates orthogonal frequency bands for directional multibeam verification. Real-time feedback is incorporated to jointly optimize beam alignment, resource allocation, and topology stability. Simulation results quantify node discovery efficiency and protocol convergence time (PCT) under various channel conditions. Field trials conducted at Qiandao Lake demonstrate that the proposed protocol achieves a neighbor discovery success rate of 98.2% within 8.4 s, validating its robustness and operational effectiveness in realistic underwater environments. The MDT-ND protocol is distinguished by its high channel resource utilization and simple implementation, enabling rapid and reliable neighbor node discovery even in challenging underwater environments.
Neighbor discovery in underwater acoustic networks (UANs) faces challenges such as high propagation delay and limited spectrum resources. This study proposes a dynamic beam control-based multi-parallel transceiver neighbor discovery protocol (DBCB), which improves node discovery efficiency by dynamically matching transmission beams and optimizing spatiotemporal frequency resource allocation. During node initialization, the master node broadcasts omnidirectionally to quickly capture coarse-grained neighbor parameters. After obtaining these parameters, the master node dynamically allocates orthogonal frequency bands for directional multi-beam validation and optimizes beam alignment, resource allocation, and topology stability through real-time feedback. The protocol adaptively optimizes transmission power and continues the discovery task, while nodes that remain undiscovered for extended periods automatically adjust their receiving gain. The adaptive power control mechanism adjusts the transmission power based on node distance and azimuth, enabling the protocol to maintain low power consumption and enhance interference resilience. Simulation results show that the DBCB protocol outperforms similar neighbor discovery protocols based on directional transmission-reception (DTR) and random two-way (RTW) mechanisms, with improvements of 7.84% and 28.17% in average discovery rate, and reductions of 28.13% and 59.06% in average discovery delay, respectively. The anechoic tank experiment demonstrates that multi-beam parallel transmission effectively improves underwater node discovery efficiency, with simulation results aligning with experimental data, confirming the stability and high efficiency of the system.
Orthogonal frequency division multiplexing (OFDM) is the preferred scheme for high-speed communication in the field of underwater acoustic communication. However, it is very sensitive to the carrier frequency offset (CFO). This study used a time-varying CFO estimation method aided by the differential evolution (DE) algorithm to accurately estimate the CFO of an OFDM system. This method was based on the principle that the received OFDM signal with inter-carrier interference could be considered by a Multi Carrier-code division multiple access (MC-CDMA) system on the receiver side because MC-CDMA is a technology that combines OFDM and code division multiple access (CMDA). Because it is suitable for solving problems where there are dependencies between adjacent variables, the DE algorithm was used to capture the varying CFO values on the adjacent blocks. The spreading code of the MC-CDMA was obtained based on the estimated CFO values, which were elements in the DE solutions. Then the received signal was reconstructed. The Root-Mean-Square Error between the reconstructed and actual received signals was used as the cost function, and the CFO was estimated using the DE algorithm because of its powerful parallel search capability. The simulation results showed that the proposed method had a high estimation accuracy. Compared with other intelligent optimization algorithms such as the genetic algorithm and simulated annealing mutated-genetic algorithm, the time-varying CFO estimation performance of the DE algorithm was better because of its unique ability to solve problems with dependencies between adjacent variables. Specifically, under the condition of a high signal-to-noise ratio, the improvement of estimation accuracy reaches 36.13%, and the Bit Error Rate of demodulation is thus reduced by 75%, compared with the reference algorithms. In addition, the proposed method also has good applicability to modulation methods. For phase-shift keying and quadrature amplitude modulation, in particular, the proposed method not only achieved high-precision time-varying CFO estimation values, but also reduced the demodulation deterioration caused by noise.
1 November 2026 in IEEE Internet of Things Journal