High-viscosity modified asphalt is mainly used as a binder for porous asphalt in China and Japan. In order to meet the demand for using porous asphalt under high temperature condition in Africa, high-viscosity asphalt made from low-grade matrix asphalt, which is commonly used in Africa is investigated. Based on simulation of local climate in Africa, the suitable range of high viscosity additive content for different matrix asphalt was obtained by analyzing dynamic viscosity of the asphalt. Through PG high temperature grading, multi-stress repeated creep, accelerated fatigue, temperature sweep and other tests, changes of high temperature, anti-fatigue and anti-shear indicators before and after modification were compared and analyzed and effects of different matrix asphalt were also studied. Finally, considering engineering requirements, mixing and compaction temperatures of various high-viscosity modified asphalt were determined through study of viscosity-temperature characteristics. This research provides a support for preparation of high-viscosity modified asphalt and porous asphalt mixture by using low grade asphalt. The research achievements can help to guide the material design and application of porous asphalt in Africa and other high temperature areas.
This study investigated the potential for efficient and resourceful utilization of phosphogypsum (PG) through the preparation of a High-volume Phosphogypsum Cement Stabilized Road Base (HPG-CSSB). The investigation analyzed the unconfined compressive strength (UCS), water stability, strength formation mechanism, microstructure, and pollutant curing mechanism of HPG-CSSB by laser diffraction methods (LD), X-ray diffraction (XRD), fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), and inductively coupled plasma-mass spectrometry (ICP-MS). The optimal mix ratio of HPG-CSSB was 4% cement, 1% CA2, 35% PG, and 60% graded crushed stone. The UCS reached 6.6 MPa, 9.3 MPa, and 11.3 MPa at 7, 28, and 60 d, respectively. The alkaline curing agent stimulated cement activity and accelerated the release of Ca2+ and SO42− from the PG. This formed many C-S-H gels and ettringite (AFt). The curing agent converted Ca2+ to C-(A)-S-H gels due to high volcanic ash activity. The diverse hydration products strengthened HPG-CSSB. The HPG-CSSB exhibits favorable water stability, demonstrating a mere 7.6% reduction in strength following 28 d of immersion. The C-S-H gel and AFt generated in the system can carry out ion exchange and adsorption precipitation with F− and PO43− in PG, achieving the curing effect of toxic and hazardous substances. HPG-CSSB meets the Class A standard for integrated wastewater discharge.
The complexity of physicochemical properties in iron ore tailings has led to extensive and varied study avenues. Moreover, changes in these features resulting from source discrepancies have complicated the identification of consistent patterns in study findings, thereby hindering the standardization and advancement of resource exploitation technologies. This paper provides a comprehensive analysis of the utilization pathways for iron tailings. It identifies the mainstream recovery processes for rare earth minerals, a relatively less-researched direction. It also describes research progress on the use of iron tailings for the preparation of fertilizers and soil conditioners, as well as their application as cementitious materials or aggregates in building materials and mine backfilling engineering. It incorporates various activation methods for the preparation of cementitious materials from iron tailings into a unified comparative framework and quantifies the key performance indicators of different activation pathways through a summary table. It also summarizes studies on the ecological reclamation of tailings ponds based on bioremediation techniques. The essential physicochemical properties of iron deposits are meticulously analyzed, and this is followed by a specialized overview of the principal treatment techniques, critical performance indicators, and their foundational mechanisms. The current application of various technical approaches is examined to identify key problems, and future development opportunities are outlined.
28 February 2022 in Journal of Testing and Evaluation
Natural rubber latex (NRL) is a polymer material collected from rubber trees with polyisoprene as the main component, which is a sustainable renewable material. With many excellent physical properties, it has been used to modify petroleum asphalt for paving roads very early to improve the performance of asphalt and asphalt mixtures. In order to prepare a modified asphalt with good comprehensive performance, this paper mixes NRL and styrene-butadiene-styrene (SBS) latex to prepare a composite-modified asphalt and conducts the experimental test of the penetration grading system and the experimental test of the rheological index. To obtain a modified asphalt with good comprehensive performance, NRL and SBS latex are mixed in this study to prepare a composite-modified asphalt, and the penetration grading system and rheological index are tested experimentally. The experimental results show that the addition of NRL and SBS latex significantly improves the anti-aging performance of asphalt. Fluorescence microscopy observations show that when the ratio of NRL latex to SBS latex is 1:1 to 1:2, the microstructure of the modified asphalt appears as a bicontinuous phase that interpenetrates the asphalt and latex phases and forms a stable grid. The rutting experiment and low-temperature trabecular bending experiments show that both the high- and low-temperature performance of the NRL/SBS latex composite–modified asphalt mixture improve greatly compared with that of NRL latex–modified asphalt mixture. Furthermore, the water immersion Marshall test and freeze–thaw splitting test show that the NRL-modified asphalt mixture has good resistance to water damage.