Selecting the best multi-objective algorithms for photovoltaic energy storage system (PV-ESS) design remains challenging due to limited benchmarking across renewable energy studies. This study addresses this gap through a systematic evaluation of four widely used multi-objective optimization algorithms: NSGA-II, Multi-Objective Particle Swarm Optimization (MOPSO), weighted-sum scalarization, and ε-constraint methods. Performance assessment utilized three Pareto front quality metrics: Inverted Generational Distance (IGD) for convergence quality, hypervolume (HV) for objective-space coverage, and spacing for solution distribution uniformity. The algorithms were tested on PV-ESS design problems in three developing economies (Nigeria, South Africa, India) under identical problem formulations and computational resources. NSGA-II achieved superior performance across all metrics in all three case studies. For convergence quality, NSGA-II attained a mean IGD of 0.0083, outperforming MOPSO by 29%, ε-constraint by 64%, and weighted-sum by 131%. For objective-space coverage, NSGA-II achieved a mean HV of 0. 700, representing 10–16% better coverage than other methods. For solution distribution, NSGA-II showed a mean spacing of 0.076, indicating 30–117% more uniform Pareto fronts. Computational efficiency analysis revealed that NSGA-II’s runtime is between 5.5 and 7.8 h per case, providing better quality–time ratios compared to ε-constraint methods (which are 18 times slower), while avoiding MOPSO’s premature convergence. Statistical validation confirmed NSGA-II’s superiority, with p < 0.01 across all quality metrics. These results establish NSGA-II as the best algorithm for lifecycle-aware PV-ESS optimization, offering quantitative, evidence-based guidance for practitioners selecting optimization tools for renewable energy system design. The demonstrated performance leads to $ 45,000–$ 60,000 lifecycle cost savings per MW/MWh of system capacity through improved Pareto front identification.
Grid-connected photovoltaic–energy storage systems (PV-ESSs) enhance electricity reliability and lower energy costs in emerging markets. However, their commercial viability under multi-objective optimization remains under-quantified. This study offers a techno-economic and financial analysis of PV-ESS setups optimized with the Non-Dominated Sorting Genetic Algorithm II across Nigeria, South Africa, and India. The best systems feature 1.3–1.5 MW of solar capacity and 2.5–2.9 MWh of lithium-ion batteries. Results show unsubsidized levelized energy costs of USD 0.061–USD 0.064/kWh, achieving 27–35% savings compared to grid tariffs. Battery storage accounts for 67–76% of total capital costs, making battery expenses the key economic factor. Financial analysis reports net present values of USD 238,000–USD 522,000, internal rates of return of 13.7–15.8%, and discounted payback periods of 7.9–9.2 years. Monte Carlo simulations indicate an 83.4–100% probability of a positive net present value. Sensitivity analysis highlights grid tariffs and battery costs as major influences. Revenue diversification through grid services, capacity credits, and demand response can boost net present value by up to 35%. Overall, optimized PV-ESS projects can be commercially viable in emerging markets with suitable tariffs, financing, and revenue strategies.
Ion Doped Metal Oxide and its Influence on the Power Conversion Efficiency of Perovskite Solar Cells Dwayne Jensen Reddy Doctor of Applied Sciences This study focuses on the fabrication and characterization of Zinc-doped Titanium dioxide (ZnTiO2) as an Electron Transport Layer (ETL) in CH3NH3PbI3-based perovskite solar cells (PSCs). A one-step spin coating technique under controlled ambient conditions (relative humidity < 65%, room temperature ∼ 20oC ) for the development of PSC was applied to investigate the effects of Zn-ion doping on the structural, morphological, optical, and photovoltaic properties. Numerical simulations using SCAPS 1D were additionally performed to further investigate the influence of ion doping on the power conversion efficiency (PCE) of PSCs. Zn-doped TiO2 was successfully incorporated into the TiO2 crystal structure using the solgel technique. Characterization through X-ray diffraction (XRD) and Energy Dispersive X-ray Spectroscopy (EDX) confirmed the incorporation of Zn ions. The crystallite size ranged from 19.99 to 7.1 nm, depending on the Zn ion doping concentration. XRD results also indicate the formation of a highly crystalline tetragonal perovskite (CH3NH3PbI3) phase. Fourier Transform Infrared (FTIR) spectroscopy verified the presence of the anatase phase of Zn-doped TiO2, while the formation of the adduct of Pb2 with dimethyl sulfoxide (DMSO) and methylammonium iodide (MAI) was confirmed at 1015 cm-1. Scanning Electron Microscope (SEM) images exhibited fairly smooth and uniform surface coverage for the Zn-doped TiO2 layers. The Root Mean Square (Rq) values for surface roughness showed a decrease from 26.85 nm for undoped TiO2 to 23.4 nm for the 5 mol% Zn-doped TiO2 layer. UV-Vis spectroscopy demonstrated low light transmission loss characteristics from 300 to 790 nm, with the 2 mol% Zn-doped TiO2 showing slightly improved light transmission between 550 and 800 nm. The bandgap energy of undoped and Zn-doped TiO2 ranged from 3.53 to 3.38 eV, while the perovskite layer exhibited a bandgap energy of 2.06 eV. Experimentally, an optimum PCE of 5.67% was achieved with a 2 mol% dopant concentration. However, increasing the Zn dopant to 5 mol% led to a slight deterioration in the PCE. Numerical simulations revealed that increasing the donor doping concentration in the ETL improved the conduction band alignment at the ETL and perovskite interface, resulting in a PCE of 6.17%. Optimizing the absorber acceptor doping concentration and band gap improved the PCE to 10.79%, however, created a pronounced conduction band offset at the ETL/perovskite interface. This was mitigated by introducing an interfacial layer of Cubic Silicon Carbide (3C-SiC) between the absorber and ETL to minimize the conduction band offset, ultimately achieving a PCE of 12.09%.
The existing studies on Small-Scale Embedded Generation (SSEG) have not addressed the net billing framework behavior that applies to different import and export tariff rates. This paper presents the simulation and modeling of a smart net billing electricity meter for SSEG in MATLAB/Simulink R2018b. The model integrates a PV array, MPPT controller, DC-DC boost converter, three-phase voltage source inverter (VSI), LC filter, synchronous generator, and a bidirectional energy meter. A smart billing subsystem was developed to compute real-time energy costs using differential tariff rates consistent with South African utility policies. Simulations were conducted under fixed irradiance, with electrical performance evaluated over a short interval and billing dynamics assessed over an extended period. Results show stable PV generation, proper inverter synchronization with the utility grid, and accurate tracking of imported and exported energy. The system effectively calculates the net bill, demonstrating transparency, automation, and economic accuracy in line with policy-driven net billing frameworks. These outcomes validate the technical feasibility and practical relevance of smart net billing meters in modern grid-connected renewable energy applications.
Increasing grid instability and rising electricity prices highlight the need for reliable photovoltaic–battery energy storage systems (PV–BESS). This study presents a constraint-aware multi-objective optimisation framework using NSGA-II that integrates economic performance, reliability, curtailment, and battery ageing. Applied under realistic South African conditions, the optimal system achieved a levelised cost of $0.06/kWh, 97.9% reliability, 1.6% annual degradation, a net present value of $367,000, and an internal rate of return over 15%. Across regional scenarios, the framework maintained 87–91% performance consistency and improved convergence. Results demonstrate that integrating degradation and operational constraints produces more reliable, cost-effective PV–BESS designs for volatile electricity markets.