Carbon electrode materials for double layer capacitors have attracted much attention, due to their low cost and abundant sources. Their low specific capacitance, however, hinders the development of carbon electrode materials. In this paper, the large specific surface area commercial activated carbons, rich in micropores, were initially oxygen-functionalized by treatment using concentrated H2SO4, saturated (NH4)2S2O8, and H2SO4/(NH4)2S2O4 mixed oxidants, respectively. The as-prepared samples were analyzed using N2 adsorption/desorption isotherms, X-ray photoelectron spectroscopy, and Boehm titration, and used as electrode materials for supercapacitors. Characterization results displayed that the oxidation treatment decreased the specific surface area along with increasing oxygen content. The electrode test showed that the electrochemical activity increased as oxygen content increased. The result that oxygen-functionalized activated carbon, even with a lower specific surface area but much more oxygen content, had higher capacity than pristine activated carbon, tells of the critical role of oxygen functional groups. The excellent capacitive performance suggests a good potential for oxygen functional carbon material to be a highly promising electrode material for supercapacitors.
1 October 2021 in Journal of Natural Gas Science and Engineering
A series of open-tip carbon nanotubes (CNTs) were obtained by HNO3 modification with various concentrations of as-prepared carbon nanotubes via the CVD method, and this work aimed at investigating the structural features of open-tip CNTs for the methane capability. Modified CNTs had higher specific surface area and larger total pore volume, and importantly, greater micropore volume was obtained through HNO3 modification of the as-prepared CNTs. The remarkably high methane adsorption capacities were measured on the modified CNTs under pressure ranges of 0∼4.0 MPa at 298 K. The resulted H-CNT, which exhibited highest specific surface area and micropore volume, showed high methane uptake of 26.15 mg/g from the D-A model. This value was nearly as twice as the methane uptake of original CNTs (13.62 mg/g), along with an initial adsorption heat of 19.4 kJ/mol at lower coverage and 9.5 kJ/mol at higher methane coverage for H-CNT, indicating the physical nature for methane adsorption over open-tip CNTs.