Lin Lin

Dr. Lin Lin


Research Focus & Metrics

Academic Career Length

1Year (2026-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 February 2026 in Materials
Verified
Journal Article
Open access
PDF file
LZLIanzhi Zhang
LIanzhi Zhang
XLXiao Li
Xiao Li
LLLin Lin
Lin Lin
CRChangzai Ren
Changzai Ren
YWYibo Wang
Yibo Wang
LFLinlin Fei
Linlin Fei
Concrete 3D printing technology is emerging as a new way to transform the construction industry in the future. However, the existing concrete 3D printing technology still has different degrees of defects in the print molding process. The existing concrete 3D nozzles need to undergo a long motion trajectory when printing complex curved components, which leads to lower geometric accuracy of curved structures, as well as poorer overall molding quality of the printed components. The aim of this study is to design a reducer nozzle to effectively shorten the printing stroke and thus improve the printing accuracy. A reducing nozzle is proposed with multi-gear internal meshing and a rotating blade structure nozzle with an adjustable outlet caliber. The mechanical strength of the rotating blade of the nozzle and the distribution characteristics of the flow field inside the nozzle are verified through fluid–solid coupling analysis. Experimental comparison shows that compared with the existing concrete 3D printing nozzle, the variable-caliber nozzle significantly improves the surface quality of the specimen, which strongly promotes the practical application and development of concrete 3D printing technology in the engineering field.

23 September 2026 in Materials
Verified
Journal Article
Open access
PDF file
YWYibo Wang
Yibo Wang
SXSen Xue
Sen Xue
LLLin Lin
Lin Lin
KYKun Yang
Kun Yang
To address the clogging issue commonly encountered with rapid-setting and hardening concrete, a liquid–solid separation 3D printing nozzle was proposed based on coupled EDEM–Fluent simulations, and its printing performance was verified. First, finite element models of different nozzle types were established, and Fluent simulations were conducted to analyze the slurry flow velocity and turbulence intensity inside the nozzle, from which the optimal outlet shape was determined. Next, the mixing effectiveness of stirring blades with various structural configurations was evaluated using EDEM, and the optimum combination of blade inclination angle, blade number, and stirring speed was identified through orthogonal experiments. Finally, the liquid–solid separation nozzle was designed, and its printing performance was experimentally validated. The results show that the conical nozzle achieves an outlet velocity standard deviation of 0.0144, indicating favorable velocity uniformity. Using the coefficient of variation as the evaluation index, the lowest value is obtained at a blade inclination angle of 40°, with three blades and a stirring speed of 120 rpm, representing the best mixing performance. In a 1 h continuous printing test, the newly developed nozzle operated without clogging, demonstrating the feasibility of the proposed design for short-duration printing tasks. Moreover, the compressive strength of the printed rapid-setting and hardening specimen (A2) was 14.3% higher than that of the conventionally cast specimen (A1), whereas the flexural strength did not exhibit a significant advantage.

22 July 2026 in Eng
Verified
Journal Article
Open access
PDF file
YWYibo Wang
Yibo Wang
GLGuangxiang Li
Guangxiang Li
QGQi Gao
Qi Gao
LLLin Lin
Lin Lin
KYKun Yang
Kun Yang
QZQi Zhang
Qi Zhang
For the newly designed direct-acting centrifugal speed limiter, this paper employs a joint simulation method using ADAMS 2019 and ANSYS 2024, and combines the experimental data to analyze the dynamic characteristics and structural strength reliability of the speed limiter. The results show that the error between the simulated trigger angular velocity and the set value is only 1.31%, and the error with the mathematical model is 3.23%. The maximum structural stress is only 2.62% of the material yield strength, and the first six natural frequencies ranging from 201 to 377 Hz are much higher than the elevator operating frequency band, eliminating the risk of resonance. The relative errors between the experimental test data, theoretical models, and simulation results are all less than 6%, verifying the accuracy and reliability of the design. The speed limiter exhibits sensitive triggering and excellent dynamic stability, providing a methodological reference for the design and verification of elevator safety components.

28 October 2026 in Materials
Verified
Journal Article
Open access
PDF file
YWYibo Wang
Yibo Wang
JLJingyi Liu
Jingyi Liu
LLLin Lin
Lin Lin
KYKun Yang
Kun Yang
MLMin Liu
Min Liu
MSMa Shiyu
Ma Shiyu
In response to the urgent demand for lightweight and thermal insulation building materials in remote island and reef infrastructure under harsh marine environments, this paper designs a new multi-bin functional graded 3D printing nozzle and relies on the optimal base material to prepare functionally graded foam concrete. The mechanical and impact resistance properties of the layered gradient foam concrete are systematically explored. The developed nozzle consists of 4 independent auxiliary bins and 1 main bin and is equipped with a blade-type spiral structure and conical nozzle. The parameters are optimized through CFD flow field simulation, and the pitch of the auxiliary screw is set at 15 mm, the pitch of the main screw at 30 mm, and the main shaft speed at 40 r/min. This structure can achieve independent transportation of multi-component slurries and avoid material mixing. Three base materials with fiber reinforcement, high-density aggregates, and porous insulation are formulated, and the O1-O2-O3 three-layer gradient arrangement scheme can simultaneously achieve the synergistic improvement of mechanical properties and pore-structure-based thermal insulation potential. Compared with homogeneous foam concrete, the optimal graded specimen has a 60% increase in compressive strength, a 100% increase in flexural strength, and, in the specific H1-H2 comparison for which quantitative drop-hammer data were obtained, the graded specimen required more repeated impacts to first cracking and to failure than the homogeneous control, indicating improved resistance to repeated impact loading. The complete set of printing equipment and gradient composite materials can provide a preliminary technical basis for further development of intelligent on-site construction on islands.