Recently, VLC has gradually become a research hotspot in indoor environments. But unfortunately, in the matter of algorithm complexity and positioning accuracy, most existing VLC-based systems fail to deliver satisfactory performance. Moreover, the majority of visible light positioning algorithm in them are based on 2-D plane. In addition, some of the systems realize 3-D positioning on the base of various sensors or hybrid complex algorithm. These methods greatly reduce the robustness of VLC system. To solve these problem, a novel VLC positioning system based on modified PSO algorithm is put forward in this article. PSO is a powerful population-based stochastic approach to solve the global optimization problems, such as VLC-based indoor positioning, which can be transformed into a global optimization problem. And the positioning results proves that this system can prove high localization accuracy and significantly lower the algorithm complexity. Moreover, in the experiment, we come up with a solution that using Kalman filter to deal with the unstable received signals. Our experiment result proves the mentioned system satisfies the requirement of cm-level indoor positioning. Therefore, this scheme may be considered as one of the competitive indoor positioning candidates in the future.
Visible Light Positioning (VLP) is widely recognized as a cost-effective solution for indoor positioning with increasing demand. However, the nonlinearity and highly complex relationship between three-dimensional world coordinate and two-dimensional image coordinate hinders the good performance of image-sensor-based VLP. Therefore, there is a need to develop effective VLP algorithms to locate the positioning terminal using image sensor. Besides, due to the high computational cost of image processing, most existing VLP systems do not achieve satisfactory performance in terms of real-time ability and positioning accuracy, both of which are significant for the performance of indoor positioning system. In addition, the accurate identification of the ID information of each LED (LED-ID) is important for positioning, because if the LED-ID is not recognized well, the positioning can only be achieved in a particular positioning unit and cannot be applied to a large scene with many LEDs. Therefore, an effective image-sensor-based double-light positioning system is proposed in this paper to solve the above problems. We also set up relevant experiments to test the performance of the proposed system, which utilizes the rolling shutter mechanism of the Complementary Metal Oxide Semiconductor (CMOS) image sensor. Machine learning was used to identify the LED-ID for better results. Simulation results show that the proposed double-light positioning system could deliver satisfactory performance in terms of both the real-time ability and the accuracy of positioning. Moreover, the proposed double-light positioning algorithm has low complexity and takes the symmetry problem of angle into consideration, which has never been considered before. Experiments confirmed that the proposed double-light positioning system can provide an accuracy of 3.85 cm with an average computing time of 56.28 ms, making it a promising candidate for future indoor positioning applications.