Suspension pipeline bridge is a significant pipeline acrossing type. In particular.. when the pipeline goes through mountain and canyon terrain, suspension pipeline bridge is often used. For parallel pipelines of the oil and gas, shared across the project is inevitable. In this paper, it takes a oil and gas shared suspension pipeline bridge which the main span is 360 meters as the research object, use the finite element numerical simulation method to analyze the dynamic response under seismic loads. According to the analysis results, it determines the weak link of the structure under the seismic and evaluates seismic performance of the structure.
Crumb rubber concrete (CRC), as a heterogeneous multiphase composite material composed of coarse aggregate, rubber particles, cement mortar, pores, and other constituents, is frequently regarded as a homogeneous material in engineering applications. This study employs numerical homogenization to compute equivalent mechanical parameters for CRC. By establishing a two-dimensional parametric random aggregate model combined with Monte Carlo simulations and finite element computations, it systematically analyzes the influence of rubber content (0%, 5%, 10%, 15%) and specimen size (50–150 mm) on CRC’s macroscopic equivalent elastic modulus. The research reveals that stable homogenization results, usable as macroscopic equivalent material parameters, are attained when the Representative Volume Element (RVE) size of the CRC model is ≥5 times the maximum aggregate particle size (dₘₐₓ). The equivalent modulus E decreases rapidly initially with increasing size, followed by a decelerated decline toward stabilization. A predictive model based on the fitted formula ln Eᵣ = kᵣ ln L + bᵣ (where Eᵣ denotes reduced modulus) enables elastic modulus prediction for large-scale components up to 600 mm. This study elucidates the macro-mesoscopic linkage mechanism governing CRC’s equivalent elastic parameters, providing a theoretical foundation for engineering structural design.
For the multi-function cathodic protection test probe, the structure and relative displacement between coupons is always a crucial problem. In this paper, the effect of the polarized coupon on the potential of the corrosion coupon and stray current interference were studied when coupons were set in two different arrangements. The results showed that, the smaller the area of the polarized coupon was relative to the corrosion coupon or the larger the space between coupons was, the stronger the performance of anti-interference of test probe by itself or the stray current was when in parallel arrangement, and it was reasonable that the area of the coupon from pipeline with coating of good quality was 1cm2; when in concentric arrangement, the geometric center of the coupon had the best performance of anti-interference, thus, with regard to pipeline with coating of poor quality but requiring coupons of larger area to simulate the holiday, the polarized coupon and the corrosion coupon could be made as circular ring type and be arranged concentrically and horizontally in the bottom of the probe of which the center was the reference electrode.