Polyester fibers are used in various fields, due to their excellent mechanical and chemical stability. However, the lack of conductivity limits their application potential. In order to prepare conductive polyester fibers, silver is one of the most widely used materials to coat the surface of the fibers. This work aimed to prepare silver-coated polyester fibers by a continuous two-step method, which combined the operations of continuous electroless plating and electroplating. Meanwhile, we designed specialized equipment for the continuous plating of silver on the polyester fibers under a dynamic condition. The mechanical property, washability, electrical resistivity, and electrical conductivity of the resultant conductive polyester fibers obtained from different silver-plating conditions were also characterized. The results demonstrated that the conductive fibers prepared by continuous two-step silver plating equipment, had good electrical conductivity with better mechanical properties and washability.
Antistatic fibers or conductive fibers can be obtained from formation of a metal conductive layer, for example silver, on the surface of polymeric fibers through a redox reaction. However, in the process of fabricating silver-polymer conductive fibers, the binding force between silver and the polymeric fiber matrix is too weak and the poor weather resistance greatly affects the performance of the conductive fibers. This work aims to synthesize composite conductive layers of polyaniline (PANi)-silver coated on polyester fibers to prepare conductive polymeric fibers, in order to improve the combining ability between the conductive layers and the fiber matrix. The morphology, thermostability, mechanical properties, washing resistance and corrosion resistance of the resultant fibers obtained from different synthesis conditions were characterized. Batch experimental results showed that the concentration of the reagent and the reaction time could affect the resistance of the PANi-silver coated conductive fibers. The results also demonstrated that the PANi-silver composite conductive fibers have better properties than those of the silver-polymer conductive fibers.
The generation of a flexible printed circuit board on polymer fabrics has been a challenge over the last decade. In this work, a copper pattern was obtained on a soft substrate of filter paper/polyacrylonitrile (FP/PAN) film, where the filter paper was commercially available. The pattern of Ag particles was first produced on an Ag+-doped FP/PAN composite film, followed by electroless plating of copper using the metal silver particles as seeds. The in situ reduction of silver particles and the formation of the silver agglomeration pattern were induced by laser irradiation technology on the FP/PAN/AgNO3 composite film. A variety of characterizations indicated that the resultant copper deposition was uniform, with good conductivity properties.