This work derives the models which can be used to design and implement control laws for six degrees-of-freedom (DOF) quadrotor stability. The first part of this paper deals with the presentation of the background of quadrotor modeling; the second part describes the direct control of the drone using the backstepping control principal. This principal is based on the division of the system into several sub-systems in a cascade, which makes the control laws generated on each subsystem, in a decreasing manner, until a global control law for the whole system is generated. The simulation results for the sm controller are generated on the MATLAB/Simulink platform; the results show a good performance in both the transient and steady-state operations.
5 May 2024 in Journal of Computing Theories and Applications
The primary problem for multi-robot displacement and motion phase solving requires that the robots prevent themselves from colliding with each other as well as stationary obstacles. In certain situations, robot conflict is unavoidable if one robot views its neighbors as immovable obstacles. Hence, this paper proposes a new NURBs (Non-Uniform Rational B-spline) based algorithm for multi-robot path planning in a crowded environment. First, the proposed technique finds each robot's free, smooth, optimal path while avoiding collision with the existing obstacles. Secondly, the prospect of possible collision between the preplanned trajectories will be computed to allow the robots to navigate in the same workspace and coordinate between them. Then, each robot's time to arrive at potential collision sites is computed based on its speed. As a result, the robots involved in the collision must choose whether to use the robot priority technique to prevent the collision. Simulation results under different scenarios and comparisons with previous works are provided to validate the work. The obtained results prove that the proposed approach is accurate (as the robot's instantaneous speed is taken into consideration), fast (as there is no need to broadcast the robots’ positions), the robots’ paths are optimal and smooth (to avoid jerk movements), and the approach ensures that the robots will not be trapped by local minima problem.
25 August 2014 in Arabian Journal for Science and Engineering
This work consists of a method enabling an autonomous mobile robot to follow a generated path in 3D. Initially, this work deals with the problem of mobile robot displacements to generate trajectories in 3D environment with obstacles avoidance. To simplify the modeling of the environment, we use the Principal Component Analysis (PCA) method to present the 3D objects in planar environment. Furthermore, we describe in a formal way the obstacles avoidance algorithms structure basing on parametric curves technique. Then, we will interest to the smoothing problem of the generated path, for this purpose we use Non Uniform Bi-splines (NURBs) curves. At the end we can, by means of an adequate sensor (radar sensor), implement the control strategies on an embarked PC chart, then send them into the robot controller in order to follow the trajectories instruction. AutoCAD software is used for simulation, and Visual basic is used to code the algorithm and to extract the parameters of the generated trajectory to be followed.