Polymers have become immensely important in industrial development. They are nowadays used for vibration damping bearings in car manufacturing, shipbuilding, and civil engineering and in the production of tyres, but not only for these. Their good formability, processibility, flexibility, and adhesiveness have also long resulted in their application as coating materials, for example for solar voltaic cells, metal surfaces, electronic components, and now even for biocompatible coating of medical implants. The purpose of the polymeric coating is thereby to protect the underlying material against environmental influences and potentially damaging media. The ensurement of adequate protection requires a knowledge of the effective life and ageing behaviour of the polymeric material, however, which brings us to the subject of this contribution. Various ageing phenomena will be discussed and experimental methods will be presented which provide information on both the physical ageing behaviour of polymers as well as on a partial area of their chemical ageing behaviour. A phenomenological material model which is rheologically motivated and thermo-mechanically consistent will be derived from the experimental results which have been obtained. The model not only enables physical ageing processes to be described, but also allows thermo-oxidative ageing to be depicted as representative of a possible chemical ageing behaviour. The formulation of the one-dimensional model enables it to detect the glass transition region, which is an essential for physical ageing behaviour. It takes the chemically caused ageing phenomena of chain scission and network reformation into consideration without the need to resolve microscopic processes in detail.
30 July 2015 in Continuum Mechanics and Thermodynamics
Many industrial applications require natural rubber (NR) as an irreplaceable polymer for its unique behaviour as its resistance to crack growth. The damage caused by ozone, seen as an ageing accelerator, influences the lifetime of rubber components. The data on ozone-induced ageing experiments are often incomplete or remain unpublished, whereas comprehensive databases for other environmental loads as oxygen do exist. A variety of experimental methods is used to investigate the ageing mechanism of ozone. The ultimate scope is to collect physically based data suitable to include it in thermo-mechanical modelling of the material’s full behaviour. Therefore, NR mixtures, without and with antiozonants: p-phenylenediamine (PPD) and paraffinic wax, are analysed. First, an accelerated, artificial ageing method is developed to reconstruct the real ageing in the laboratory. Experiments conducted henceforth are microhardness tests, uniaxial tensile tests and IR spectroscopy to determine the elastic modulus, the stress response and molecular change due to ageing. Independent of static deformation during the ageing process, both antiozonants show a significant protection effect up to the maximum loading with 75 pphm ozone concentration for 111 h at 50% relative humidity and 40 $$^\circ $$ C. Paraffinic wax completely prevents measureable mechanical change and no surface cracks are visible, though IR spectra reveal ageing-induced molecular reactions, whereas the pristine and soley 6PPD protected compounds are clearly distinguishable by their surface crack picture. Neither of the material compounds, loaded with or without strain during ozone-ageing, contains cracks of a depth further than 300 $$\upmu {\textrm{m}}$$ . The data generated on ozone ageing of rubber helps to distinguish it from thermo-oxidative ageing that is described comprehensively in the literature. In conclusion, the data proves the degradation and quantifies some characteristic material changes caused by ozone loading.
30 March 2024 in Continuum Mechanics and Thermodynamics
In the field of material modeling, thermoplastic polymers are often studied because of their complex material behavior and their prevalence in industry applications due to their low cost and wide range of applications. Nowadays, where reusability becomes more and more important, materials which can undergo reversible thermomechanical deformations are appealing for, e.g., the construction of car body components. To predict such complex forming processes with multiple influencing factors, such as temperature, strain rate or underlying material morphology, model formulations are needed that account for these influences simultaneously and are validated against experimental data. Unfortunately, up to now only a few contributions are available which consider all these phenomena. In addition, the range of process parameters considered is often narrow due to the experimental effort required for testing. This usually results in limited predictive capabilities of the model. To overcome these limitations, in this work, a thermo-mechanically coupled material model is developed that accounts for the underlying morphology in terms of the degree of crystallinity (DOC). The model formulation is derived in a thermodynamically consistent manner, incorporating coupled nonlinear visco-elastic and elasto-plastic material behavior at finite strains. To characterize and further validate the model, mechanical as well as thermal experiments are conducted for polyamide 6 (PA6). Here, a blending strategy of PA6 together with an amorphous co-polymer is introduced during specimen production to achieve a wider range of stable DOCs(approximately 15%). The model formulation is successfully applied to experimental results and its predictions are in good agreement with experimental observations.