The broadband external intensity electro-optic modulating unit is aimed to serve as a vital part of analogue measuring electro-optic system that is under the development at our department. The modulating unit is based on integrated intensity electro-optic modulator of Mach-Zehnder type. Undoubtedly, one of the most severe problems linked with application of the appliance like this seems to be its operating point time-drift. The paper deals with methodology of measurements and evaluation of drift value. Furthermore, prospective necessity of operating point stabilization is discussed here from particular application point of view.
26 October 2021 in Journal of Lightwave Technology
A new dither technique is presented to control the bias voltage of an intensity modulator of the Mach-Zehnder type to maintain the quadrature operating point. This method is based on the direct calculation of the operating point deviation. The calculation uses an exact mathematical model of the modulator. The data used for calculating the deviation value are obtained from an analysis based on a fast Fourier transform with a properly set level of vector averaging. Unlike other solutions, the proposed feedback system does not use an approach with a proportional-integral or proportional-integral-derivative controller. Moreover, the presented stabilization method is robust and invariant regarding changes in the input optical power of the modulator and immune to prospective fluctuations of most of the feedback loop parameters. With the proposed approach in its present form, a 3-hour stability of ±0.08° is achieved. This value reflects the limitations of the equipment used. Even better results can be expected using more powerful hardware.
A broadband electro-optic modulating unit forms a key part of a specialized transmission system for needs of measurements. The modulating unit is based on an integrated analog intensity modulator of Mach-Zehnder type. A proper adjustment of modulator operating point significantly affects performance of the modulator and consequently of the whole transmission system as well. The paper deals with design and implementation of a specialized driver - a bias circuit for extremely precise set-up of optimal operating point of the modulator. The driver operates on principle of suppression of second harmonic component detected at the modulator output during excitation of bias port with a low-frequency harmonic signal.
As a vital part of specialized electro-optic transmission system a broadband external modulating unit was designed and developed. The unit is based on an integrated intensity modulator of Mach-Zehnder type. Paper deals with design of auxiliary circuitry of the modulator and its implementation in order to achieve desired functionality. Solution of a broadband driver, original - manually adjustable bias controller and a power supply of the unit is presented here. Integration of all the circuits together makes the final hardware compact and unique as well.
6 November 2020 in Archives of Electrical Engineering
The paper deals with hardware solution of a fully digital dead-time generator. The circuit is applicable to the H-bridges based on any type of semiconductor switching devices including SiC, IGBT, Si-MOSFET and up-to-date GaN HEMTs. The generation of dead-times is ensured by commercially available silicon delay lines. High temperature stability is obtained by self-compensation of propagation delay of logic elements thanks to the symmetry of design topology. The circuit can be set-up to generate dead-times in the range from 10 ns to 500 ns. Longer dead-times are also available by simple cascading of the silicon delay lines. The key motivation for development of the circuit was unavailability of ready to use integrated solutions on the market. Moreover, contrary to the other solutions the proposed circuit is immune to prospective oscillations of an input PWM signal. The paper brings a detailed analysis of the circuit principle, results of the verification of a sample solution and an example of practical application as well.
The paper deals with the design of an analog circuit to substitute the role of a real intensity Mach-Zehnder modulator for the preliminary tuning of bias controllers. The proposed circuit has similar harmonic distortion as an electro-optic modulator biased around the quadrature operating point. The designed device utilizes a shaping circuit based on a differential pair of bipolar junction transistors. The harmonic distortion of both the Mach-Zehnder intensity modulator and the differential amplifier are analysed. A method to design the emulating circuit of desired features is described and explained and a the comparison of the measured results to the theory is presented.