Grand-canonical Monte Carlo and microcanonical molecular dynamics methods have been used to simulate an ultrathin monatomic film confined to a slit-pore [i.e., between solid surfaces (walls)]. Both walls comprise atoms rigidly fixed in the face centered cubic (100) configuration; one wall is smooth on a nanoscale and the other is corrugated (i.e., scored with regularly spaced rectilinear grooves one to several nanometers wide). Properties of the film have been computed as a function of the lateral alignment (registry), with the temperature, chemical potential, and distance between the walls kept constant. Changing the registry carries the film through a succession of equilibrium states, ranging from all solid at one extreme to all fluid at the other. Over a range of intermediate registries the film consists of fluid and solid portions in equilibrium, that is fluid-filled nanocapillaries separated by solid strips. The range of registries over which such fluid–solid equilibria exist depends upon the width of the grooves and the frequency of the corrugation. For grooves of width comparable to the range of the interatomic potential, fluid and solid phases cease to coexist. In the limit of very wide grooves the character of the film is similar to that of the film confined by strictly smooth walls. The rich phase behavior of the confined film due to the coupling between molecular (registry) and nano (corrugation) scales has obvious implications for boundary lubrication.
Water scarcity is a global issue that is expected to continue increasing in importance in the coming decades. Reclaimed water is one important source available to meet future needs. The reclamation process for wastewaters, particularly from industrial sources, involves the need to remove low-level contaminants. Here we report the efficacy of an ion flotation process that uses the biosurfactant monorhamnolipid as a metal collector to recover Cs+, Cd2+, and La3+ from water. These elements were tested at collector-to-colligend ratios of 2, 5, and 10. The collector-to-colligend ratio and metal valence play a large role in determining flotation success with removal efficiencies varying widely. The maximum removal efficiency for the metals when floated individually were 46.2, 99.8, and 98.6% for Cs+, Cd2+, and La3+, respectively. When mixed together at near equimolar concentrations removal efficiencies were 39.4, 98.4, and 88.1%, respectively. Removal efficiency for Cs+, Cd2+, and La3+ were up to 49.9, 99.5, and 51.5% when mixed at a ratio of 200:10:1, whereas conditional stability constants predict a removal order of La3+ > Cd2+> Cs+. Future research should examine parameters, including pH and ionic strength, that may affect the flotation process as well as actual metal-contaminated waste streams to evaluate the usefulness of this technology.
1 October 2009 in Revista Brasileira de Ciência do Solo
Ni(II)-Fe(II)-Fe(III) layered double hydroxides (LDH) or Ni-containing sulfate green rust (GR2) samples were prepared from Ni(II), Fe(II) and Fe(III) sulfate salts and analyzed with X ray diffraction. Nickel is readily incorporated in the GR2 structure and forms a solid solution between GR2 and a Ni(II)-Fe(III) LDH. There is a correlation between the unit cell a-value and the fraction of Ni(II) incorporated into the Ni(II)-GR2 structure. Since there is strong evidence that the divalent/trivalent cation ratio in GR2 is fixed at 2, it is possible in principle to determine the extent of divalent cation substitution for Fe(II) in GR2 from the unit cell a-value. Oxidation forms a mixture of minerals but the LDH structure is retained if at least 20 % of the divalent cations in the initial solution are Ni(II). It appears that Ni(II) is incorporated in a stable LDH structure. This may be important for two reasons, first for understanding the formation of LDHs, which are anion exchangers, in the natural environment. Secondly, this is important for understanding the fate of transition metals in the environment, particularly in the presence of reduced Fe compounds.
1 August 2007 in Revista Brasileira de Ciência do Solo
In order to investigate the efficiency of sulfate green rust (GR2) to remove Ni from solution, GR2 samples were synthesized under controlled laboratory conditions. Some GR2 samples were synthesized from Fe(II) and Fe(III) sulfate salts by precipitation. Other samples were prepared by coprecipitation, of Ni(II), Fe(II) and Fe(III) sulfate salts, i.e., in the presence of Ni. In another sample, Ni(II) sulfate salt was added to pre-formed GR2. After an initial X-ray diffraction (XRD) characterization all samples were exposed to ambient air in order to understand the role of Ni in the transformation of the GR2 samples. XRD was repeated after 45 days. The results showed that Nious GR2 prepared by coprecipitation is isomorphous to Ni-free GR2, i.e. Ni is incorporated into the crystalline structure. Fe(II) was not replaced by Ni(II) in the crystalline structure of GR2 formed prior to exposure to solution-phase Ni. This suggests Ni was adsorbed to the GR2 surface. Sulfate green rust is more efficient in removing Ni from the environment by coprecipitation.
15 January 2003 in The Journal of Chemical Physics
Molecular dynamics computer simulations are used to study diffusion of monolayer octamethylcyclotetrasiloxane and cyclohexane films confined between atomically structured uncharged mica surfaces. Diffusion parallel to the walls is found to be anisotropic due to the influence of the atomically structured surfaces. If the surfaces are aligned perfectly the fluid occupies isolated regions of the pore space and diffusion is the same in all lateral directions and is a minimum. If one of the surfaces is shifted laterally in the x-direction by one-half unit cell diffusion is enhanced in the x-direction along conduits formed by the overlapping potential energy fields of the surfaces. This work augments earlier work by the authors and confirms that diffusion of a confined simple fluid in a nanoscale slit-pore is tunable in terms of direction and magnitude through control of the relative alignment of the surfaces.