Lead-free barium calcium titanate zirconate (BCTZ) ceramics doped with a single rare-earth element generally exhibit excellent piezoelectric properties. However, their electrical properties deteriorate at an excessive dopant content, limiting their application. In this study, amphoteric neodymium (Nd3+) and yttrium (Y3+)-codoped BCTZ-NYx ceramics were synthesized via a solid-state reaction at 1240 °C. The influences of the Y3+ content (x) on the structural features, electrical properties, mechanical properties, and thermophysical properties were investigated. At a small x (<0.18 mol%), Y3+ could enhance the fracture strength and electrical properties by eliminating oxygen vacancies, defect dipoles, and/or structural defects. However, the outstanding performance deteriorated with excessive x. Additionally, the mechanism of the defect chemistry at different x was deduced. At an yttrium content of 0.18 mol%, the ceramic exhibited high piezoelectricity and ferroelectricity with low domain-switching activation energy (Ea = 0.401 eV), indicating that it could replace commercial lead-based piezoelectric ceramics.
Single-phase α-cordierite glass-ceramics for a low-temperature co-fired ceramic (LTCC) substrate were fabricated from tuff as the main raw material, using the non-stoichiometric formula of α-cordierite with excess MgO without adding any sintering additives. The sintering/crystallization behavior and the various performances of dielectric properties, thermal expansion, and flexural strength of the glass-ceramics were detected. The results indicated that only single-phase α-cordierite crystal was precipitated from the basic glass sintered at the range 875–950 °C, and μ-cordierite crystal was not observed during the whole sintering-crystallization process. The properties of glass-ceramics were first improved and then deteriorated with the increase in tuff content and sintering temperature. Fortunately, the glass-ceramics sintered at 900 °C with 45 wt.% tuff content possessed excellent properties: high densify (2.62 g∙cm−3), applicable flexural strength (136 MPa), low dielectric loss (0.010, at 10 MHz), low dielectric constant (5.12, at 10 MHz, close to α-cordierite), and suitable coefficients of thermal expansion (CTE, 3.89 × 10−6 K−1).
1 June 2019 in International Journal of Applied Ceramic Technology