To address the challenges of difficult quantitative design and potential coil mismatch in auxiliary coils within wireless power transfer systems, a data-driven parameter optimization method based on multi-objective particle swarm optimization (MOPSO) was proposed. First, based on the inductor–capacitor–capacitor series (LCC-S) compensation topology, a mechanism-based analysis was conducted, establishing coil side length A and number of turns N as core optimization variables. Subsequently, a collaborative optimization framework integrating “parametric simulation–surrogate modeling–active learning” was established. An offline fingerprint database was constructed via finite element simulation, and a high-accuracy surrogate model was developed using a kernel ridge regression ensemble approach. Active learning strategies were employed to adaptively augment data points and mitigate uncertainty. Finally, the multi-objective particle swarm optimization (MOPSO) algorithm was applied to identify the Pareto-optimal solution set. Experimental results reveal that the optimized auxiliary coil parameters achieved positioning errors below 8 mm at all test points. The maximum positioning error was significantly reduced by approximately 80% compared to the traditional empirical approach, providing a useful parameter-selection reference for high-precision wireless charging alignment systems under the investigated static operating conditions.
In response to the significantly reduced efficiency of magnetic coupling wireless charging for unmanned aerial vehicles (UAVs) caused by their high sensitivity to transmitter and receiver coil alignment, as well as landing point errors, a position identification method based on the detection coil-induced voltage fingerprint and embedded neural network regression is proposed. This enables position alignment through a 2D mechanical structure. Firstly, by means of an S–S compensation topology with a bipolar (BP) symmetrical four-detection-coil array deployed at the transmitter, the system effectively suppresses primary direct coupling, ensuring that the position of the receiver coil predominantly determines the detection signals. Secondly, by establishing a voltage fingerprint database during the offline stage and utilizing a multi-layer perceptron–radial basis function (MLP-RBF) regression model, the system achieves high-precision end-to-end positioning and alignment control during the online stage through induced voltage acquisition and data processing. Finally, experiments demonstrate that the proposed method achieves centimeter-level positioning accuracy, with an average error of approximately 1.2 cm and a maximum error of less than 1.8 cm, presenting excellent deployability and engineering applicability.
Isothermal dispatch models for battery energy storage systems (BESSs) systematically underestimate degradation costs because dispatch-induced Joule heating elevates cell temperature and accelerates ageing through Arrhenius-type kinetics. This paper proposes three integrated contributions. First, a thermal–electrochemical coupling loop embeds a first-order lumped thermal model within the dispatch simulation: cell temperature is updated from I2R heat generation and Newton cooling at each time step, and the resulting temperature trajectory feeds into the Arrhenius stress factors of a semi-empirical degradation model combining -based calendar ageing with Rainflow-based cycle ageing, enabling the optimiser to discover thermally self-regulating strategies. This coupling is critical because, as the results demonstrate, ignoring it leads to systematic underestimation of degradation costs by up to 13%. Second, the resulting four-objective problem (negative profit, thermally coupled degradation cost, SOC deviation, and CVaR imbalance penalty) is solved by a hypervolume-contribution-enhanced NSGA-III (HVC-NSGA-III), which augments reference-point selection with an archive pruned by removing the solution of the smallest individual hypervolume contribution, concentrating Pareto resolution in the knee region. Third, an SOH-adaptive knee-point selection assigns the degradation weight as a monotone function of ageing degree , automatically tightening dispatch conservatism as remaining useful life diminishes. Simulations on ENTSO-E data over 96 h show the following: (i) thermal coupling shifts the Pareto front by 8–15% in the degradation dimension with temperature excursions up to 7 K; (ii) HVC-NSGA-III improves hypervolume by 8.7% over standard NSGA-III; (iii) SOH-adaptive selection reduces capacity loss by 27.4% at only 9.1% revenue cost; and (iv) ablation confirms Rainflow (24.8%) and thermal coupling (13.1%) as the two largest contributors.
Magnetically coupled wireless power transfer is highly sensitive to the relative height between the transmitter and receiver coils. Meanwhile, complex electromagnetic interference and measurement noise induce fluctuations in the voltage fingerprints and degrade the fingerprint-library quality, which in turn leads to an unstable closed-loop alignment. To address these issues, this study proposes a position identification and closed-loop alignment method based on decoupled sensing-coil voltage fingerprints and integrated neural network regression. First, a four-quadrant symmetric decoupled sensing-coil array is deployed at the transmitter, and a compensation network is introduced to suppress direct-coupling effects. Thus, the multi-channel sensing voltages are primarily driven by the planar position variation of the receiver coil, thereby forming voltage fingerprints with improved spatial separability. Second, an original evaluation metric for centimeter-level alignment reliability is developed, and a lightweight residual calibration strategy is designed to target hard samples and tail errors to alleviate the error amplification caused by fingerprint noise and distribution imbalance. On this basis, a multi-model fusion integrated neural network is constructed to enhance disturbance rejection and prediction consistency. Finally, closed-loop alignment experiments are conducted over a two-dimensional workspace and compared with representative baseline methods. The results demonstrate that the proposed method achieves more concentrated terminal alignment positions and more stable closed-loop behavior, even when the fingerprint library is of low quality, thus validating its engineering applicability and robust alignment capability.