Al-Si-Mg alloys are investigated to determine the relationship between changes in the thermal diffusivity and precipitation behavior of the Mg2Si phase with various contents of Mg2Si and aging treatment conditions. The samples were solid solution-treated and then quenched with water (80 °C). Aging treatments were implemented at temperatures ranging from 180 to 240 °C for 5 h. The precipitation behavior of Mg2Si was observed using a heat flow curve using differential scanning calorimetry analysis. The thermal diffusivity of Al-Mg2Si alloy was affected by the precipitation of the Mg2Si phase, particularly in the meta-stable β phase. In the temperature range of precipitation occurrence, the thermal diffusivity of the alloy increased with the temperature when the precipitation of the meta-stable β phase of the sample was incomplete. However, at the same temperature, the samples in which precipitation had completed did not have any increased thermal diffusivity. The thermal diffusivity of the samples decreased when the meta-stable Mg2Si phase had dissolved in the matrix. The precipitation and dissolution of Mg2Si mainly affected the variation of thermal diffusivity in Al-Si-Mg. In contrast, the stable Mg2Si phase was not affected by changes in thermal diffusivity at a high temperature.
The objective of this study was to investigate the effects of alloying elements on mechanical and thermal characteristic of Al-6wt-%Si-0.4wt-%Mg–(Cu) foundry alloys after heat treatment using a universal testing machine and a laser flash apparatus. Solid solution treatment of samples was carried out at 535°C for 6 h before quenching samples in warm water. Artificial ageing treatment was conducted at various temperatures ranging from 180 to 220°C for 5 h. When Cu was added to increase the mechanical strength of Al-6wt-%Si-0.4wt-%Mg alloy, its thermal conductivity decreased. After adding 0.1wt-%Ti to an Al-6 wt-%Si-0.4wt-%Mg-0.9wt-%Cu alloy, ultimate tensile strength (UTS) was improved 18 MPa compared to that of Ti-free alloy at ageing temperature of 180°C. The addition of Ti facilitated the formation of θ′-Al2Cu and Q′-phase, which resulted in increased UTS at room temperature. In the case of Cu-free Al-6wt-%Si-0.4wt-%Mg alloy, adding Ti to the alloy did not affect the UTS.
21 December 2019 in Journal of Thermal Analysis and Calorimetry