Lithium-ion batteries (LIBs) are increasingly used in portable electronics due to their high energy densities, long cycle life, low self-discharge properties, and environmentally friendly features. To satisfy future large-scale energy storage, the development of high-performance electrode materials is highly important. Complex Ti-based oxides (such as Li4Ti5O12 and Li–M–Ti–O) have interesting properties for anode applications, including good safety performance and high cyclic stability. However, most of the complex Ti-based oxides suffer from low electronic conductivities and insufficient Li+-ion diffusion coefficients, significantly limiting their rate capabilities. In general, compositing is an effective strategy to tackle this issue. Comprehensively good electrochemical performance can be achieved in the composites arising from the complementarity and correlation of the components. This review focuses on the composite characteristics and compositing methods of the complex Ti-based oxides for high-performance lithium-ion storage. The relations among the material composition, material fabrication, material structure, material property and LIB performance are emphasized. In addition, a vista of future research and development in this research field is also presented.
30 August 2022 in Advanced Composites and Hybrid Materials
In this study, annealing carbon fibres with boron and FeCl3·6H2O at elevated temperatures was demonstrated as a novel route to coat carbon fibres with boron nitride (BN) nanosheets. The effect of annealing temperature on the thickness and microstructure of BN coating was investigated. Results showed that BN coating hardly formed at 1000 °C, and uniform BN coating was achieved at 1100 °C and 1200 °C. However, further increasing the temperature to 1250 °C triggered the formation of discretely distributed BN particles on the surface of the BN coating in addition to the formation of a uniform BN coating. The BN coating and particles were constructed by numerous BN nanosheets with a bending and crumpling morphology. The thickness of the BN coating increased with increasing annealing temperature. The oxidation resistance of the carbon fibres dramatically enhanced after BN nanosheets were coated onto the carbon fibre surface. Moreover, given the low dielectric loss tangent of BN, the BN coating can improve the impedance matching of carbon fibres and enhance the microwave-absorbing property of carbon fibres significantly.
26 June 2021 in Advanced Composites and Hybrid Materials