The influence of reaction parameters on the stabilization of nickel(II) ferrite hydrosols in the presence of polyethyleneimine (PEI) was studied by methods of mathematical planning and design of experiment (FFD 27-4). The nickel(II) ferrite hydrosol, which retained sedimentation stability for 2 months, was prepared under optimal conditions. The NiFe2O4/Au hybrid material was prepared by adsorption of gold seeds on the magnetic particles followed by four-step reduction of Au(III) with hydroxylamine in the presence of PEI. According to transmission electron microscopy and X-ray photoelectron spectroscopy data, the material consisted of uniform spherical Au0 nanoparticles of 4.0 ± 0.5 nm size uniformly distributed over the surface of ferrite nanoparticles of 9.7 ± 0.2 nm in diameter. Gold particles were strongly attached to the surface were not detached during post-synthetic and ultrasonic treatment. The content of gond particles can be adjusted by varying the number of gold reduction steps.
Ultrasonic cavitation is a key mechanism in the dispersion and erosion of solid materials in liquids; however, the influence of processing conditions and medium properties on its efficiency in ultrasonic baths remains poorly systematized. Despite the widespread use of ultrasonic baths in materials processing, general optimization principles are lacking, and operating parameters are typically determined empirically for each system. In this work, cavitation activity was quantitatively assessed using an aluminum foil erosion test, with the foil clamped in a plastic frame to evaluate the mechanical effects of cavitation. The effects of ultrasonic power, frequency, treatment time, temperature, solvent nature, and vessel material on the foil mass loss were systematically investigated. The results demonstrate that both the instrumental parameters and physicochemical properties of the dispersion medium, including viscosity and surface tension, significantly affect the cavitation activity. Solvents with lower cavitation thresholds and favorable acoustic properties promote more intense erosion, while the vessel material and geometry also influence energy transmission to the liquid. This study provides a systematic framework for assessing the cavitation dose in ultrasonic baths and offers practical guidelines for optimizing ultrasonic dispersion processes and improving their reproducibility.
Ultrasonic cavitation is a key mechanism in the dispersion and erosion of solid materials in liquids; however, the influence of processing conditions and medium properties on its efficiency in ultrasonic baths remains poorly systematized. Despite the widespread use of ultrasonic baths in materials processing, general optimization principles are lacking, and operating parameters are typically determined empirically for each system. In this work, cavitation activity was quantitatively assessed using an aluminum foil erosion test, with the foil clamped in a plastic frame to evaluate the mechanical effects of cavitation. The ef-fects of ultrasonic power, frequency, treatment time, temperature, solvent nature, and ves-sel material on the foil mass loss were systematically investigated. The results demon-strate that both the instrumental parameters and physicochemical properties of the dis-persion medium, including viscosity and surface tension, significantly affect the cavita-tion activity. Solvents with lower cavitation thresholds and favorable acoustic properties promote more intense erosion, while the vessel material and geometry also influence en-ergy transmission to the liquid. This study provides a systematic framework for assessing the cavitation dose in ultrasonic baths and offers practical guidelines for optimizing ul-trasonic dispersion processes and improving their reproducibility.