The presence of lead compounds in the environment is an issue. In particular, supply water consumption has been reported to be a significant source of human exposure to lead compounds, which can pose an elevated risk to humans. Due to its toxicity, the International Agency for Research on Cancer and the US Environmental Protection Agency (USEPA) have classified lead (Pb) and its compounds as probable human carcinogens. The European Community Directive and World Health Organization have set the maximum acceptable lead limits in tap water as 10 µg/L. The USEPA has a guideline value of 15 µg/L in drinking water. Removal of lead ions from water and wastewater is of great importance from regulatory and health perspectives. To date, several hundred publications have been reported on the removal of lead ions from an aqueous solution. This study reviewed the research findings on the low-cost removal of lead ions using different types of adsorbents. The research achievements to date and the limitations were investigated. Different types of adsorbents were compared with respect to adsorption capacity, removal performances, sorbent dose, optimum pH, temperature, initial concentration, and contact time. The best adsorbents and the scopes of improvements were identified. The adsorption capacity of natural materials, industrial byproducts, agricultural waste, forest waste, and biotechnology-based adsorbents were in the ranges of 0.8–333.3 mg/g, 2.5–524.0 mg/g, 0.7–2079 mg/g, 0.4–769.2 mg/g, and 7.6–526.0 mg/g, respectively. The removal efficiency for these adsorbents was in the range of 13.6–100%. Future research to improve these adsorbents might assist in developing low-cost adsorbents for mass-scale applications.

In the present time, more often, it has been seen that scaling has grown as widely and caused problems in the oilfield industry. Scaling is the deposition of various salts of inorganic/organic materials due to the supersaturation of salt-water mixtures. Many works have been proposed by researchers using different methods to solve the problem, of which scale inhibition is one of them. The scale inhibitors, particularly for antiscaling, have derived from natural and synthetic polymers. Among different polymers, inorganic and organic compounds (polyphosphates, carboxylic acid, ethylenediaminetetraacetic acid (EDTA), etc.) can effectively manage the oilfield scales of which many are toxic and expansive. Scale inhibitors of alkaline earth metal carbonate and sulfates and transition metal sulfide are commonly used in oilfield applications. Scale inhibition of metallic surfaces is an essential activity in technical, environmental, economic, and safety purposes. Scale inhibitors containing phosphorus appear to have significant achievements in the inhibition process despite its toxicity. However, phosphorus-based inhibitors can serve as supplements prompting eutrification difficulties. Besides these increasing environmental concerns, green scale inhibitors are renewable, biodegradable, and ecologically acceptable that has been used to prevent, control, and retard the formation of scale. Considering the facts, this review article summarized the concept of scale, various green scale inhibitors, types, mechanisms, comparative performance, significance, and future aspects of green scale inhibitors, which will shed light and be helpful for the professionals working in the oil and gas industries.

Sulfonated homo and co- polyimide (sPI) were synthesized with new compositional ratios, and used as additives (0.5 wt%, 0.75 wt%, and 1.0 wt%) to prepare blend membranes with polysulfone (PSf). Flat sheet membranes for ultrafiltration (UF) were casted using the phase inversion technique. Surface morphology of the prepared UF membranes were characterized by atomic force microscopy (AFM) and scanning electron microscopy (SEM). Surface charge of the membranes were determined by zeta potential, and hydrophilicity was studied by contact angle measurement. The contact angle of the membrane decreased with increasing sPI additive indicates increasing the hydrophilicity of the blend membranes. Filtration studies were conducted for rejection of heavy metals (Pb²⁺ and Cd²⁺) and proteins (pepsin and BSA). Blend membranes showed better rejection than pure PSf membrane. Among the blend membranes it was observed that with increasing amount of sPIs enhance the membrane properties and finally, PSf-sPI5 membrane with 1 wt% of sPI5 showed the improved permeability (72.1 L m⁻² h⁻¹ bar⁻¹), and the best rejection properties were found for both metal ions (≈98% of Pb²⁺; ≈92% of Cd²⁺) and proteins (>98% of BSA; > 86% of Pepsin). Over all, this membrane was having better hydrophilicity, porosity and higher number of sites to attach the metal ions. Its performance was even better than several-reported sulfonic acid based UF membranes. All these intriguing properties directed this new UF membrane for its potential application in wastewater treatment.

The phenomenon of corrosion threatens metallic components, human safety, and the economy. Despite being eco-friendly and promising as a corrosion inhibitor, acridine has not been explored to its full potential. In this review, we have discussed multiple biological activities that acridines have been found to show in a bid to prove that they are environmentally benign and much less toxic than many inhibitors. Some synthetic routes to acridines and substituted acridines have also been discussed. Thereafter, a multitude of acridines and substituted acridines as corrosion inhibitors of different metals and alloys in various corrosive media have been highlighted. A short mechanistic insight into how acridine-based compounds function as corrosion inhibitors have also been included. We believe this review will generate an impression that there is still much to learn about previously reported acridines. In the wake of recent surges to find efficient and non-toxic corrosion inhibitors, acridines and their analogs could be an appropriate answer.