The floating height of the strip in an air cushion furnace is a key parameter for the quality and efficiency of production. However, the high temperature and high pressure of the working environment prevents the floating height from being directly measured. Furthermore, the strip has multiple floating states in the whole operation process. It is thus difficult to employ a single model to accurately describe the floating height in different states. This paper presents a multi-model soft sensor to estimate the height based on state identification and the soft transition. First, floating states were divided using a partition method that combined adaptive k-nearest neighbors and principal component analysis theories. Based on the identified results, a hybrid model for the stable state, involving a double-random forest model for the vibration state and a soft-transition model, was created to predict the strip floating height. In the hybrid model for the stable state, a mechanistic model combined thick jet theory and the equilibrium equation of force to cope with the lower floating height. In addition, a novel soft-transition model based on data gravitation that further reflects the intrinsic process characteristic was developed for the transition state. The effectiveness of the proposed approach was validated using a self-developed air cushion furnace experimental platform. This study has important value for the process prediction and control of air cushion furnaces.
The strip floating height is a key factor affecting production efficiency and quality of the air cushion furnace. At present, the air cushion furnace with hybrid nozzles is the most typical heating and drying equipment. In order to predict the floating height of the strip in this equipment, a hard-division and multi-model based floating height prediction method is proposed. In hard division method, the process is divided into several stable and vibration stages. On the one hand, time interval based novel density clustering algorithm is proposed so as to avoid the wrong division caused by noise at hard division stage. On the other hand, covariance matrices based local density is presented to better capture dynamic characteristics of the process. In the multi-model stage, a hybrid prediction model under stable state and XGBoost-based model under vibration state are established to predict the strip floating height. The hybrid prediction model is composed of mechanism model and data driven model. The mechanism model is proposed by combining the force balance equation and inviscid theory which can predict the major information of the floating height and the data driven model compensates the error of the mechanism model. A mount of experiments have been carried out on the existing air cushion experimental platform and show desirable prediction effect.
A 6063 aluminum alloy thin slab with a cross-section of 260 × 40 mm2 was prepared by a vertical bending continuous casting (VC) process. The effects of homogenization, hot rolling and subsequent heat treatments on the microstructure and properties of the as-cast slabs and as-rolled sheets were investigated by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), field emission electron probe (EPMA), macro- and micro-structure observation and tensile tests. The results show that the as-cast structure of AA 6063 was dominated by fine and uniform equiaxed grains. After homogenization, all Mg2Si phases dissolved back, and the Fe-containing intermetallic phases changed from acicular β-Al5FeSi phase to spherical α-Al8Fe2Si phase. Homogenizing heat treatment before hot rolling can improve the mechanical properties of the alloy. However, in the case of direct rolling without homogenization, the alloy still has good mechanical properties; the strength and plasticity are comparable to that obtained through traditional direct chill (DC) casting, homogenizing and extruding processes, indicating that the VC process has the potential to realize continuous casting and rolling.
12 April 2022 in Ironmaking & Steelmaking: Processes, Products and Applications
To investigate the processes of continuous annealing and MgO coating of grain-oriented silicon steel (GO), a pilot-scale line was developed, which could realize functions such as cleaning, heating, decarburization, reduction, nitriding, and MgO coating in a coil-to-coil manner. A significant feature of the pilot line is the integrated furnace consisting of six furnace units and the in-between separating devices, which work collaboratively to adjust the lengths, and to separate the annealing atmospheres and temperatures of the different process sections. A series of test runs and experiments was carried out on the line. The results showed that the pilot line had the characteristics of flexible process, accurate process parameters control and reliable atmosphere separation. The results of decarburization, reduction, nitriding, and coating met the requirements of GO. The pilot line provided an excellent platform for the experimental study of the processes of continuous annealing and MgO coating of GO.