özlem Kayacan

Dr. özlem Kayacan

orcid

Research Focus & Metrics

Academic Career Length

20Years (2007-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 September 2012 in The Journal of the Textile Institute
Verified
Journal Article
Closed access
FÇFatma Çeken
Fatma Çeken
ÖKözlem Kayacan
özlem Kayacan
AÖAhmet Özkurt
Ahmet Özkurt
ŞUŞebnem Seçkin Uğurlu
Şebnem Seçkin Uğurlu
In recent years, the use of electrical and electronic devices has grown rapidly. These devices cause electromagnetic interferences, which could threaten human life. In order to solve this problem, intensive research to develop textile surfaces having electromagnetic shielding properties continues. In this paper, we study textile surfaces knitted with conductive copper and stainless steel wires wrapped with acrylic yarns and also core yarns produced by using conductive yarns to test the electromagnetic shielding properties of the fabrics. It was concluded that the knitted structure of the fabrics affected the electromagnetic shielding effectiveness (EMSE). Besides, the fabrics knitted on a double needle bed of the knitting machine with higher amounts of conductive yarns and unit weights could not provide the targeted improvement in the EMSE values with respect to the fabrics produced on a single needle bed of the knitting machine.

24 March 2010 in Textile Research Journal
Verified
Journal Article
Closed access
ÖKözlem Kayacan
özlem Kayacan
AKArif Kurbak
Arif Kurbak
In this study, two different types of liquid cooling garments are designed and their cooling effects are comparatively investigated. The tubing lengths and the inner layers of these garments are taken as the same, and the other parameters of the garments differed. In the outer layer of the garments, 10 × 3 rib and single jersey knitted wool fabrics are used. In the inner layer of the fabrics, cotton wound dressings are used. In one garment design, S-shaped sponges are used as the mid layer. For 10 × 3 rib the mid layer is obtained by three loops of 10 × 3 rib, and the outer layer is obtained by 10 loops of 10 × 3 rib, due to its three-dimensional structure. To test these garments, a thermal manikin and a chiller are developed. The effects of water inlet temperature and flow rate on the cooling effect are examined. Outer garments of 10 × 3 rib structure are found to provide effective cooling. When the water inlet temperature decreases, the effective cooling slightly increases. At lower flow rates, effective cooling increases slightly, while this effect disappears for higher flow rates.

1 April 2008 in Textile Research Journal
Verified
Journal Article
Closed access
PDF file
AKArif Kurbak
Arif Kurbak
ÖKözlem Kayacan
özlem Kayacan
A model for the spirality of plain knitted fabrics with compressible yarns is given here by modifying Kurbak's (1998) plain knitted loop model. The proposed model is thought to be applicable not only to the spirality of classical textiles, but also to modeling small diameter tubular technical textile fabrics. In the present study, it is suggested that because of the three-dimensional nature of the plain loop, the yarn part at the left arm of the loop and the yarn part at the right arm of the loop have torsions in opposite directions, so that if the yarn used is already twist lively, this potential twist applies in the same direction for both of the arms. Therefore, the total twist decreases in one arm and increases in the other. To equalize their total twists, the curves of the yarn axis in the arms differ from each other (the elliptical cylinders on which the yarn arms wrapped differ in length and in radius). The upper and lower parts of the loop adjust themselves by transforming into parametric elliptical shapes from their original elliptical shapes. There is another method of twist redistribution in the fabrics, which is to differentiate the wrapping angles of the helices on two arms of a loop. This is defined as “the second kind of spirality” and is mainly seen in m × n rib structures as well as in some of the technical textile plain knitted fabrics. This second kind of spirality is not considered during the creation of the model, but a discussion is given on this subject at the end of the work.

1 July 2008 in Textile Research Journal
Verified
Journal Article
Closed access
PDF file
AKArif Kurbak
Arif Kurbak
ÖKözlem Kayacan
özlem Kayacan
In this work the geometrical model of a tuck stitch and its effect on the plain knitted fabric structure are introduced. The geometrical model of this knit + tuck combination is created here for the first time, being a pioneering basic work on knit + tuck combinations. This model is then plotted using 3DS Max software. It is shown that the obtained shapes are exactly the same shapes observed in real fabrics.

31 August 2017 in Fibres & Textiles in Eastern Europe
Verified
Journal Article
Closed access
MKMihriban Kalkanci
Mihriban Kalkanci
GKGülseren Kurumer
Gülseren Kurumer
HÖHasan Öztürk
Hasan Öztürk
MSMahmut Sinecen
Mahmut Sinecen
ÖKözlem Kayacan
özlem Kayacan
The purpose of the present study was to estimate dimensional measure properties of T-shirts made up of Single Jersey and interlock fabrics through Artificial Neural Networks (ANN). To that end, 72 different types of t-shirts were manufactured under 2 different fabric groups, each was consisting of 2 groups: one with elastane and the other without. Each of these groups were manufactured from six different materials in three different densities through two different knitting techniques of single jersey and interlock. For estimation of dimensional changes in these T-shirts, models including feed-forward, back-propagated, the momentum learning rule and sigmoid transfer function were utilized. As a result of the present study, the ANN system was found to be successful in estimation of pattern measures of garments. The prediction of dimensional properties produced by the neural network model proved to be highly reliable (R2> 0.99).

1 August 2008 in Textile Research Journal
Verified
Journal Article
Closed access
ÖKözlem Kayacan
özlem Kayacan
AKArif Kurbak
Arif Kurbak
In this work a model of miss stitch and its effect on the plain knitted fabric structure are introduced for the first time, thus we present a pioneering basic work on knit and miss combinations. Photographs of knitted samples were taken and the assumptions of the model are based on these photographs. A geometrical model of this knit and miss combination is created and the model is drawn to scale. We show that these shapes are found to be exactly the same shapes as observed in real fabrics.