In order to offer simple and convenient assistance for the elderly and disabled to take care of themselves, we propose a general learning and generalization approach for a service robot to accomplish specified tasks autonomously in an unstructured home environment. This approach firstly learns the required tasks by learning from demonstration (LfD) and represents the learned tasks with dynamic motion primitives (DMPs), so as to easily generalize them to a new environment only with little modification. Furthermore, we integrate dynamic potential field (DPF) with the above DMPs model to realize the autonomous obstacle avoidance function of a service robot. This approach is validated on the wheelchair mounted robotic arm (WMRA) by performing serial experiments of placing a cup on the table with an obstacle or without obstacle on its motion path.

The calibration problem of binocular stereo vision rig is critical for its practical application. However, most existing calibration methods are based on manual off-line algorithms for specific reference targets or patterns. In this paper, we propose a novel simultaneous localization and mapping (SLAM)-based self-calibration method designed to achieve real-time, automatic and accurate calibration of the binocular stereo vision (BSV) rig’s extrinsic parameters in a short period without auxiliary equipment and special calibration markers, assuming the intrinsic parameters of the left and right cameras are known in advance. The main contribution of this paper is to use the SLAM algorithm as our main tool for the calibration method. The method mainly consists of two parts: SLAM-based construction of 3D scene point map and extrinsic parameter calibration. In the first part, the SLAM mainly constructs a 3D feature point map of the natural environment, which is used as a calibration area map. To improve the efficiency of calibration, a lightweight, real-time visual SLAM is built. In the second part, extrinsic parameters are calibrated through the 3D scene point map created by the SLAM. Ultimately, field experiments are performed to evaluate the feasibility, repeatability, and efficiency of our self-calibration method. The experimental data shows that the average absolute error of the Euler angles and translation vectors obtained by our method relative to the reference values obtained by Zhang’s calibration method does not exceed 0.5˚ and 2 mm, respectively. The distribution range of the most widely spread parameter in Euler angles is less than 0.2˚ while that in translation vectors does not exceed 2.15 mm. Under the general texture scene and the normal driving speed of the mobile robot, the calibration time can be generally maintained within 10 s. The above results prove that our proposed method is reliable and has practical value.

As the aging of the population becomes more severe, wheelchair-mounted robotic arms (WMRAs) are gaining an increased amount of attention. Laser pointer interactions are an attractive method enabling humans to unambiguously point out objects and pick them up. In addition, they bring about a greater sense of participation in the interaction process as an intuitive interaction mode. However, the issue of human–robot interactions remains to be properly tackled, and traditional laser point interactions still suffer from poor real-time performance and low accuracy amid dynamic backgrounds. In this study, combined with an advanced laser point detection method and an improved pose estimation algorithm, a laser pointer is used to facilitate the interactions between humans and a WMRA in an indoor environment. Assistive grasping using a laser selection consists of two key steps. In the first step, the images captured using an RGB-D camera are pre-processed, and then fed to a convolutional neural network (CNN) to determine the 2D coordinates of the laser point and objects within the image. Meanwhile, the centroid coordinates of the selected object are also obtained using the depth information. In this way, the object to be picked up and its location are determined. The experimental results show that the laser point can be detected with almost 100% accuracy in a complex environment. In the second step, a compound pose-estimation algorithm aiming at a sparse use of multi-view templates is applied, which consists of both coarse- and precise-matching of the target to the template objects, greatly improving the grasping performance. The proposed algorithms were implemented on a Kinova Jaco robotic arm, and the experimental results demonstrate their effectiveness. Compared with commonly accepted methods, the time consumption of the pose generation can be reduced from 5.36 to 4.43 s, and synchronously, the pose estimation error is significantly improved from 21.31% to 3.91%.