Silicon phthalocyanine (SiPc) derivatives have recently emerged as promising materials for n-type organic thin-film transistors (OTFTs) with the ability to be fabricated either by solid state or solution processes through axial functionalization. Among those, bis(tri-n-propylsilyl oxide) SiPc ((3PS)2-SiPc) is unique as it can be processed by sublimation, while being soluble enough for solution processing. In this work, the charge transport properties of (3PS)2-SiPc and its polymorphic forms were studied through Kinetic Monte Carlo (KMC) simulations and density functional theory (DFT) calculations along with the characterization of (3PS)2-SiPc in n-type OTFTs fabricated by physical vapour deposition (PVD) and spin coating. Post-deposition thin-film characterization by X-ray diffraction (XRD), atomic force microscopy (AFM), and scanning transmission X-ray microscopy (STXM) was used to assess film morphology and microstructure in relation to the electrical performance of OTFTs. The differences in film formation by PVD and solution fabrication had little effect on OTFT performance with comparable field-effect mobility and threshold voltage ranging between 0.01–0.04 cm2 V−1 s−1 and 18–36 V respectively. Consistent charge transport properties of (3PS)2-SiPc OTFTs achieved at different fabrication conditions highlights the processing versatility of this material.
Novel organic heterostructures fabricated with a bilayer consisting of an axially substituted silicon phthalocyanine (R2‐SiPc) derivative and lutetium bis‐phthalocyanine (LuPc2) are investigated for their ammonia sensing properties. Surface and microstructure characterization of the heterostructure films reveal either compact or highly porous surface topography in (345F)2‐SiPc and Cl2‐SiPc‐based heterostructures, while electrical characterization reveals a strong influence of the axial substituent in R2‐SiPc on NH3 sensing capabilities. Electrical characterization further demonstrates an apparent energy barrier for interfacial charge transport, which is higher in the (345F)2‐SiPc/LuPc2 heterojunction device. In‐depth charge transport studies by impedance spectroscopy further reveal a resistive interface in (345F)2‐SiPc/LuPc2 and faster bulk and interfacial charge transport in Cl2‐SiPc/LuPc2 heterojunction devices. Different interfacial charge transport capabilities and surface topographies affect NH3 sensing properties of the two heterojunction devices, in which (345F)2‐SiPc/LuPc2 reveals a fast and non‐linear response with a limit of detection (LOD) of 310 ppb, while Cl2‐SiPc/LuPc2 exhibits a slow, and linear response to NH3 with LOD of 100 ppb. Finally, different metrological parameters of the two sensors are correlated to the respective gas‐material interactions, in which adsorption and diffusion regimes are modulated by the surface topography and hydrophobicity of the sensing layer.