Shuo Wang

Dr. Shuo Wang

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 July 2023 in Actuators
Verified
Journal Article
Open access
PDF file
SWShuo Wang
Shuo Wang
ZYZhenliang Yu
Zhenliang Yu
JWJingbo Wang
Jingbo Wang
SCSisi Chen
Sisi Chen
As the core component of the automobile braking system, brake pads have a complex structure and high failure rate. Their accurate and effective state monitoring can help to evaluate the safety performance of brake pads and avoid accidents caused by brake failure. The wear process of automobile brake pads is a gradual, nonlinear, and non-stationary time-varying system, and it is difficult to extract its features. Therefore, this paper proposes a CNN-LSTM brake pad wear state monitoring method. This method uses a Convolutional Neural Network (CNN) to complete the deep mining of brake pad wear characteristics and realize data dimensionality reduction, and a Long Short-Term Memory (LSTM) network to capture the time dependence of the brake pad wear sequence, so as to construct the nonlinear mapping relationship between brake pad wear characteristics and brake pad wear values. At the same time, the artificial Gorilla Troops Optimization (GTO) algorithm is used to perform multi-objective optimization of the network structure parameters in the CNN-LSTM model, and its powerful global search ability improves the monitoring effect of the brake pad wear status. The results show that the CNN-LSTM model based on GTO multi-objective optimization can effectively monitor the wear state of brake pads, and its coefficient of determination R2 value is 0.9944, the root mean square error RMSE value is 0.0023, and the mean absolute error MAE value is 0.0017. Compared with the BP model, CNN model, LSTM model, and CNN-LSTM model, the value of the coefficient of determination R2 is the closest to 1, which is increased by 8.29%, 5.52%, 4.47%, 3.30%, respectively, which can more effectively realize the monitoring and intelligent early warning of the brake pad wear state.

1 January 2026 in The Journal of Engineering
Verified
Journal Article
Open access
SWShuo Wang
Shuo Wang
ZYZhenliang Yu
Zhenliang Yu
CLChangguo Lu
Changguo Lu
CLChuanqi Li
Chuanqi Li
Aiming at the problems of low monitoring accuracy of tool condition and insufficient intelligence of health management in high‐end CNC machine tools, this paper takes the CNC machining centre (YSV‐855) milling titanium alloy (Ti‐6Al‐4 V) as the research object and proposes a tool life cycle health management method based on digital twin. By constructing a four‐layer digital twin architecture including the physical perception layer, virtual modelling layer, data interconnection layer and intelligent service layer, the bidirectional real‐time interaction between the physical machine tool and the virtual model is realized. Through the fusion of multi‐source sensor (vibration, acoustic emission and cutting force) data, a hybrid prediction model based on multi‐scale convolutional neural network and bidirectional long short‐term memory network is developed, combined with cross‐scale dual attention mechanism, which effectively improves the accuracy of tool wear state recognition. The experimental results show that the proposed method can achieve a wear state recognition accuracy of 99.72% in titanium alloy milling, with a root mean square error and mean absolute error of the remaining life of 0.9537 and 0.7860, respectively. Compared with the traditional method, the prediction accuracy is improved by 2.34% to 7.18%, the standard deviation of the prediction error is reduced by 40.66% to 61.17%, and the average absolute deviation from the true value is reduced by 40.56% to 62.74%. At the same time, the digital twin system developed based on Unity3D realizes the visualization monitoring and intelligent early warning function of tool condition, providing an effective solution for tool health management in the intelligent manufacturing environment.

7 October 2024 in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
Verified
Journal Article
Closed access
SWShuo Wang
Shuo Wang
ZYZhenliang Yu
Zhenliang Yu
FHFengwei Huo
Fengwei Huo
CLChangguo Lu
Changguo Lu
JWJingbo Wang
Jingbo Wang
As the core components of high-precision rotary machine tools, machine tool bearings are prone to failure or damage, and their running state directly affects the safety and reliability of the entire equipment. Therefore, the paper proposes an intelligent operation and health management method for machine tool bearings based on Bayes-VMD-KPCA, Bayes-CNN-SVM, and health status evaluation index. Aiming at the complex working environment and high nonlinear degree of fault features of machine tool bearings, the Bayes-VMD-KPCA algorithm is used to perform variational mode decomposition of the original signal of the bearing fault, which avoids the influence of background noise and solves the problem of high dimension of multi-domain fault feature set. Second, the CNN-SVM fault diagnosis model uses a convolutional neural network (CNN) to deeply mine the extracted multi-domain fault features, and a support vector machine (SVM) can be used as a fault classifier to complete the diagnosis of various fault types of machine tool bearings. At the same time, the Bayes algorithm is introduced to tune the hyperparameters in the CNN-SVM model to further improve the prediction performance of the CNC machine tool-bearing fault diagnosis model. The results show that the intelligent operation and maintenance and health management method of CNC machine tool bearings proposed in this paper can effectively complete the fault type diagnosis and health status assessment of bearings, and its accuracy index reaches 99.33%. Compared with the single SVM model, Bayes-CNN model, Bayes-SVM model, and CNN-SVM model, the health effect is evaluated. The accuracy is increased by 6.33%, 4.33%, 2.66%, and 1%, respectively. It can be seen that the proposed method can more effectively realize the monitoring and health management of bearing fault.

14 October 2024 in The Journal of Engineering
Verified
Journal Article
Open access
SWShuo Wang
Shuo Wang
ZYZhenliang Yu
Zhenliang Yu
LGLiu Guangming
Liu Guangming
WMWu Mengxuan
Wu Mengxuan
In satellite design and manufacturing, due to the influence of material properties, sandwich structure and equivalent algorithm, there is usually a significant deviation between the theoretical model and the actual physical prototype. To solve the issue, a new finite element model of satellite sailboard based on sandwich theory is constructed. The key parameters of the model are iteratively optimized by Lagrange optimization algorithm to improve its accuracy and reliability. The Lansos method is used to simulate the satellite sailboard model, and the comparison is made with the actual test model. The results show that the error of the modified model in the first six orders of frequency is less than 5%, which meets the modal correlation standard, and the modal assurance criterion (MAC) value is higher than 0.85. Compared with the uncorrected model, the first six frequency errors are reduced by 0.1%, 0.9%, 0.7%, 2.0%, 1.1% and 5.5%, respectively. At the same time, the MAC value of each mode increased by 1.9%, 3.2%, 1.2%, 2.6%, 13.1% and 27.1%, respectively. These findings show that the revised sailboard model is closer to the test model in terms of frequency and modal characteristics, while providing a higher level of accuracy and reliability.

14 January 2026
Verified
Preprint
Open access
SWShuo Wang
Shuo Wang
ZYZhenliang Yu
Zhenliang Yu
CLChangguo Lu
Changguo Lu
CLChuanqi Li
Chuanqi Li
Aiming at the problems of low monitoring accuracy of tool condition and insufficient intelligence of health management, takes the CNC machining center milling titanium alloyas the research object and proposes a tool life cycle health management method based on Digital Twin. By constructing a four-layer digital twin architecture, the bidirectional real-time interaction between the physical machine tool and the virtual model is realized. Through the fusion of multi-source sensor data, a hybrid prediction model based on MSCNN-BiLSTM network is developed, combined with cross-scale dual attention mechanism, which effectively improves the accuracy of tool wear state recognition. The experimental results show that the proposed method can achieve a wear state recognition accuracy of 99.72% in titanium alloy milling, with a root mean square error and mean absolute error of the remaining life of 0.9537 and 0.7860, respectively. Compared with the traditional method, the prediction accuracy is improved. At the same time, the digital twin system developed based on Unity3D realizes the visualization monitoring and intelligent early warning function of tool condition. The results show that the system improves the overall equipment efficiency by 15% to 20%, providing an effective solution for tool health management in the intelligent manufacturing environment.

20 September 2026 in International Journal on Interactive Design and Manufacturing (IJIDeM)
Verified
Journal Article
Closed access
PDF file
SWShuo Wang
Shuo Wang
ZYZhenliang Yu
Zhenliang Yu
CLChangguo Lu
Changguo Lu
PLPeng Liu
Peng Liu