Series of Ni-base single-crystal superalloys with superior thermal durability have been developed to improve thermal efficiency of gas turbine systems. Microstructural transition during creep so called “raft structure” formation enhances creep properties at lower stress and higher temperature condition. Furthermore, larger perfection degree of the raft structure contributes to better creep properties under the same creep condition. To control the perfection degree of the raft structure, magnitude of a lattice misfit and an elastic misfit between γ and γ′ phases should be controlled. In the current situation, the lattice misfit can be controlled by using alloy design program NIMS has developed. In this review, we focused on the role of the raft structure in alloy design. Observation results and predicted mechanisms about strengthening by the microstructural transition, in addition to the mechanism about microstructural transition itself during creep, were summarized and explained. Finally, under these recognitions mentioned above, our effort to establish a new alloy design approach to control the perfection degree of the raft structure by modifying the elastic misfit were introduced. This Paper was Originally Published in Japanese in J. Japan Inst. Met. Mater. 86 (2022) 157–171.
This study presents the design and microstructural investigation of a single-crystal (SX) Re-bearing high-entropy superalloy (HESA-X1) featuring a thermally stable γ–γ′–γ hierarchical microstructure. The alloy exhibits FCC γ nanoparticles embedded within L12-ordered γ′ precipitates, themselves distributed in a γ matrix, with the suppression of detrimental topologically close-packed (TCP) phases. To elucidate solidification behavior and phase stability, Scheil–Gulliver and TC-PRISMA simulations were conducted alongside SEM and XRD analyses. Near-atomic scale analysis in 3D using Atom Probe Tomography (APT) revealed pronounced elemental partitioning, with Re strongly segregating to the γ matrix, while Al and Ti were preferentially enriched in the γ′ phase. Notably, Re demonstrated a unique partitioning behavior compared to conventional superalloys, facilitating the formation and stabilization of γ nanoparticles during two-step aging (Ag-2). These γ nanoparticles significantly contribute to improved mechanical properties. Long-term aging (up to 200 h) at 750–850 °C confirmed exceptional phase stability, with minimal coarsening of γ′ and retention of γ nanoparticles. The coarsening rate constant K of γ′ at 750 °C was significantly lower than that of Re-free HESA, confirming the diffusion-suppressing effect of Re. These findings highlight critical roles of Re in enhancing microstructural stability by reducing atomic mobility, enabling the development of next-generation HESAs with superior thermal and mechanical properties for high-temperature applications.