The development of materials based on renewable and low‐cost resources is today’s crucial interest for civil engineering. This work intends to investigate two new vegetable fibers as composite reinforcement for insulation application in the building industry. Miscanthus and sunflower stalk have mainly been selected for their high fiber content, low water content after harvesting, and availability. These criteria lead to good structural properties and allow a reduction in production and transportation costs. This study aims at demonstrating the feasibility to produce cohesive panels from these lignocellulosic fibers and their related interesting mechanical and thermal properties according to various natural binders.

A micromechanics-based damage model able to describe the brittle response of initially anisotropic materials is presented. A special emphasis is put on the account of damage-induced anisotropy and unilateral behaviour related to microcracks closure effects. These both features clearly influence the inelastic deformation of microcracked materials and lead to even more complex consequences in the context of initial anisotropy. The aim of this work is then to derive a new strain-based formulation which allows representing the related interactions between all these phenomena. This is achieved through a recent two-dimensional energy-based micromechanical analysis that accounts for the fully anisotropic multilinear response of orthotropic materials weakened by arbitrarily oriented microcracks. On the other hand, the thermodynamics framework gives a standard procedure for the development of the damage evolution law. Throughout the paper, attention is put on the mathematical and thermodynamical consistency of the model to avoid difficulties usually associated to the simultaneous description of damage-induced anisotropy and unilateral effects. In addition to elastic constants, the model requires the identification of only two parameters related to damage evolution. The model has been implemented within the commercial finite-element code ABAQUS, and various numerical simulations are presented to illustrate its capabilities. Especially, evolution of the material symmetry and influence of opening-closure states of microcracks on the damage process are illustrated in the case of brittle matrix composites subjected to different loading cases (axis and off-axis loads, tension and compression, tension followed by compression).

In this paper, we present some basic elements of macroscopic modelling of damage. We then recall the general approach of continuum damage based on the thermodynamics of irreversible processes and its application to isotropic damage modelling. The study of damage-induced anisotropy is treated by considering a second order tensorial damage variable. Finally, we present an original macroscopic approach through which is addressed the question of unilateral effects due to the microcracks closure.

International audienceA three-dimensional model of damage by microcrack growth is proposed to account for the mechanical behavior of quasi brittle materials (especially for concrete and rocks). The emphasis is put on the induced anisotropy and on the elastic moduli dependence on the opening and closure of microcracks (unilateral effect). This formulation is based first on a damage characterization throught the microcracked density distribution, and secondly avoids the use of spectral decompositions generally adopted in literature and which induce some major inconsistencies

This work aims at demonstrating the interest of a new methodology for the design and optimization of composite materials and structures. Coupling reliability methods and homogenization techniques allow the consideration of probabilistic design variables at different scales. The main advantage of such an original micromechanics-based approach is to extend the scope of solutions for engineering composite materials to reach or to respect a given reliability level. This approach is illustrated on a civil engineering case including reinforced fiber composites. Modifications of microstructural components properties, manufacturing process, and geometry are investigated to provide new alternatives for design and guidelines for quality control.