Humanoid manipulators with kinematic redundancy offer enhanced dexterity and adaptability to complex environments. Solving their inverse kinematics (IK) is fundamental to trajectory tracking, motion planning, and real-time control. Conventional Jacobian-based iterative methods are widely used, but they are often sensitive to the initial guess, computationally expensive, and less effective in handling strict constraints. Arm-angle-based analytical parameterization reduces redundancy resolution to a single parameter. However, joint limits may lead to multiple disconnected feasible arm-angle intervals. Many existing methods still depend on a numerical search or intelligent optimization to select the arm angle. This lowers computational efficiency and provides less explicit control over branch and configuration selection. To address these issues, this paper extends the arm-angle analytical IK framework. It introduces global configuration parameters to explicitly control the shoulder-elbow-wrist configuration. It also completes the analytical derivation of the rotational relationships of the first three joints in the reference plane. In addition, a feasibility determination and modeling scheme for the arm-angle domain is established, which covers disconnected feasible intervals. The IK problem is then reformulated as a one-dimensional optimization over the feasible domain. An efficient interval-based search is employed to determine the optimal arm angle. Experimental results demonstrate high accuracy and interference-free trajectory tracking. Comparative tests on randomly sampled target poses are also performed. The results show more concentrated error distributions, shorter average computation time, and higher success rates. These results confirm the advantages of the proposed method in accuracy, robustness, and real-time performance.
This study systematically investigates the mechanism underlying the effects of combined addition of Si and Al on the microstructure evolution during spheroidizing annealing and the strength-toughness properties of GCr15 bearing steel. The results indicate that Si–Al alloying increases the austenitization temperature (Ac1) and austenite stability, thereby significantly refining the initial pearlitic microstructure and reducing the pearlite interlamellar spacing from 655 nm to 431 nm. However, as non-carbide-forming elements, Si and Al also decrease carbon diffusivity and retard spheroidization kinetics. This leads to incomplete spheroidization under the same annealing conditions, resulting in a mixed carbide morphology consisting of spherical carbides and residual lamellar carbides. Regarding the strengthening and toughening mechanism, the addition of Si–Al significantly improves the strength through grain refinement strengthening and pearlite refinement. After spheroidizing annealing, the Si–Al bearing steel retains a considerable degree of solid-solution strengthening, resulting in a strength reduction of only 2.6%, which is superior to the 11.0% decrease in the steel without Si–Al addition. The improvement in impact toughness is mainly attributed to the increased proportion of high-angle grain boundaries and the optimized carbide morphology, which transforms from a continuous network into dispersed particles, thereby effectively restraining crack propagation. Si–Al alloying refines the microstructure while retarding the spheroidization process, providing an important theoretical basis for developing high-efficiency and energy-saving heat treatment processes for bearing steels.
As a globally significant economic crop, tea yield and quality are strongly affected by disease control. Traditional manual inspection is inefficient and subjective, while non-targeted chemical application may increase pesticide use and environmental burden. To support lesion-level precision plant protection, this study proposes a tea disease detection and targeted pesticide application framework that combines an improved YOLOv12 detector with RGB-D three-dimensional (3D) perception and robotic execution. A self-built dataset containing 2121 source images from four tea disease categories was first partitioned at the original-image level into training, validation, and test subsets, and data augmentation was applied only to the training subset to prevent source-level leakage. The proposed YOLO-EMA-SoftNMS-DSConv (YOLO-EPS) model integrates Efficient Multi-Scale Attention (EMA), Distribution Shift Convolution (DSConv), and Soft Non-Maximum Suppression (Soft-NMS). Under the leakage-controlled protocol, YOLO-EPS achieved 94.28% mAP@0.5 and 87.16% mAP@0.5:0.95. Five independent runs with fixed source-level partitions yielded 94.24 ± 0.20% mAP@0.5, indicating stable training behavior. Detector-only inference time was 1.8 ms per image on an RTX 5090 desktop GPU using a Blackwell-compatible PyTorch/CUDA software stack. The system further maps two-dimensional lesion detections to RGB-D point clouds and robot coordinates and uses local surface geometry to support pose-aware targeted spraying. Controlled 3D localization and edge-platform latency experiments were conducted separately from the desktop detector benchmark. The proposed framework provides a basis for integrating disease recognition, spatial perception, and robotic targeted application in tea plantations.