Gulnara Katkeeva

Dr. Gulnara Katkeeva

orcid

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 September 2016 in Tsvetnye Metally
Verified
Journal Article
Closed access
A“Astana Scientific-Technological Center “Parasat”
Astana Scientific-Technological Center “Parasat”
NBN. S. Bekturganov
N. S. Bekturganov
GKGulnara Katkeeva
Gulnara Katkeeva
IOI. M. Oskembekov
I. M. Oskembekov
MAM. A. Akubaeva
M. A. Akubaeva
This paper gives the investigation results of sulfidizing of oxidized copper ores of Udokan deposit and influence of this process on concentratibility. Sulfidizing was carried out in autoclave with the temperature of 160 °C with application of element sulfur. Mathematical model of hydrothermal sulfidizing of Udokan ore was obtained by probabilistic-determined planning of experiment. The factors of hydrothermal sulfidizing are process temperature, duration, sulfur consumption on oxidized copper sulfidizing, and sodium sulfate consumption according to the consumed sulfur. Sulfidizing technology of oxidized copper ores by sodium polysulfide with 85 °C temperature in cell was offered for the purpose of decreasing of energy intensity of this process. There was obtained the mathematical model of the process, showing the influence of sulfidizing factors on copper mineral flotation. The possibility of use of low-disperse element sulfur during the synthesis of polysulfide solutions was investigated together with their usage as sulphidizer at the temperature of 80 °C. Application of low-disperse sulfur provides the decrease of energy intensity of solution obtaining. Besides, sulfiding properties of obtained reagents are changed. According to the obtained results, copper extraction with ordinary sodium polysulfide is higher, than the one with sodium sulfide: copper extraction growing is ~13%. At the same time, sulfiding is the prospective method of increasing of benefication efficiency of oxidated copper ores of Udokan deposit. Every offered method allows the increasing of copper extraction in concentrate.

27 October 2025 in Metallurgist
Verified
Journal Article
Closed access
PDF file
GKGulnara Katkeeva
Gulnara Katkeeva
OMOskembekov Ilyas Malikovich
Oskembekov Ilyas Malikovich
AAAkubaeva Makijan Aubakirovna
Akubaeva Makijan Aubakirovna
Дилара Рафаиловна ГизатуллинаДилара Рафаиловна Гизатуллина
Дилара Рафаиловна Гизатуллина
ZSZhamilya Shayke
Zhamilya Shayke
AZAnuarbek Mahsutzhanovich Zhunussov
Anuarbek Mahsutzhanovich Zhunussov

25 March 2026 in Processes
Verified
Journal Article
Open access
PDF file
GKGulnara Katkeeva
Gulnara Katkeeva
ИОИльяс Оскембеков
Ильяс Оскембеков
EZErlan Maksutjanovich Zhunusov
Erlan Maksutjanovich Zhunusov
ZSZhamilya Shayke
Zhamilya Shayke
BKBaurzhan Bolatovich Kozhabekov
Baurzhan Bolatovich Kozhabekov
SKSultan Kabylkanov
Sultan Kabylkanov
Coal preparation tailings from the K18 seam of the Abayskaya mine were evaluated as a potential secondary source of critical rare earth elements (REEs). The study showed that REEs are predominantly associated with the mineral fraction of coal; therefore, during beneficiation, approximately 70% of their total content is transferred to flotation tailings. The concentrations of valuable elements in the tailings are as follows (g/t): Li—65; Sc—16; Y—17; Yb—2.5; V—135; and Ti—2293. These values significantly exceed the Clarke values and are comparable to those of some low-grade primary ores, indicating the potential of coal preparation wastes as a technogenic raw material for critical elements. To extract REEs from the resistant aluminosilicate matrix, a fluorine–ammonium sulfate thermochemical activation method was proposed. Using a probabilistic–deterministic experimental design approach, a mathematical model of the process was developed and optimal parameters were determined (400 °C, 120 min, (NH4)2SO4 consumption—140% relative to Al, NH4HF2 consumption—110% relative to Si), providing a feed liberation degree (by Al extraction) of up to 94%. Under optimal conditions, high leaching efficiencies of key elements were achieved: Sc (95%), Y (100%), Yb (100%), and Li (100%). The results demonstrate the significant potential of coal preparation tailings as a secondary resource of rare earth elements and confirm the efficiency of fluorine–ammonium sulfate technology for processing this type of technogenic waste.

29 December 2022 in Горный журнал Казахстана
Verified
Journal Article
Closed access
КТК.с. Туребекова
К.с. Туребекова
GKGulnara Katkeeva
Gulnara Katkeeva
ИОИ.м. Оскембеков
И.м. Оскембеков
RSRuslan Sultangaziyev
Ruslan Sultangaziyev
В работе представлены результаты коллективной флотации обескремненного техногенного баритового сырья. Для определения эффективности применения флотационного метода обогащения без предварительного обескремнивания были проведены исследования по влиянию на извлечение цветных металлов из обескремненного баритового продукта во флотационный концентрат трех факторов – расходов активатора и собирателя, времени агитации пульпы с медным купоросом. В результате были определены оптимальные расходы реагентов и математическая модель процесса коллективной флотации обескремненного баритового продукта. Получены удовлетворительные результаты по извлечению в коллективный концентрат меди, цинка и свинца. Коллективная флотация обескремненного баритового продукта при оптимальных условиях показала, что цветные металлы извлекаются при оптимальных условиях на уровне 98%. The paper presents the results of collective flotation of desiliconized technogenic barite raw materials. To determine the effectiveness of the use of the flotation method of enrichment without prior desiliconization, studies were carried out on the effect on the extraction of non-ferrous metals from the desiliconized barite product into the flotation concentrate of three factors – the costs of the activator and collector, the time of pulp agitation with copper sulphate. As a result, the optimal consumption of reagents and a mathematical model of the process of collective flotation of the desiccified barite product were determined. Satisfactory results have been obtained for the extraction of copper, zinc and lead into the collective concentrate. Collective flotation of the desiccated barite product under optimal conditions showed that non-ferrous metals are recovered under optimal conditions at a level of 98%.

29 February 2024 in Obogashchenie Rud
Verified
Journal Article
Closed access
NON. K. Omarova
N. K. Omarova
RSR. T. Sherembaeva
R. T. Sherembaeva
GKGulnara Katkeeva
Gulnara Katkeeva
AMA. A. Mukhtar
A. A. Mukhtar
This paper studies sulfide lead-zinc ores of the Akzhal deposit in the Republic of Kazakhstan. The ore mineralization is relatively evenly distributed and is represented by pyrite, sphalerite, and galena. Flotation experiments were carried out in open and closed cycles under the current reagent conditions applied at the plant and under the reagent conditions proposed, using a silica depressant. The optimal grinding size was established at 69.77 % –0.074 mm, as it ensures the most acceptable process indicators, in particular, the zinc content in the zinc concentrate. Open-cycle experiments were carried out with the liquid glass rates varying between 60 and 120 g/t. At a rate of 60 g/t, the mass fraction of zinc in the concentrate was 23.03 % with a recovery of 52.29 %, and the mass fraction of silicon dioxide was 3.14 %. With a liquid glass consumption rate of 90 g/t, the mass fraction of zinc increased to 26.54 %, with a recovery of 54.41 %, and the mass fraction of silicon dioxide was 2.16 %. These are the maximum values of zinc content in the zinc concentrate achieved; with the liquid glass consumption rate increased to 120 g/t, the mass fraction of Zn in the concentrate dropped to 21.94 % with a recovery of 52.28 %, and the mass fraction of silicon dioxide was 3.15 %. In closed-cycle experiments, the mass fraction of zinc in the zinc concentrate was 43.99 % with a recovery of 58.47 %. The mass fraction of silicon dioxide in the concentrate was 2.15 %, with a recovery into the tailings of 94.03 %.

30 June 2020 in Obogashchenie Rud
Verified
Journal Article
Closed access
GKGulnara Katkeeva
Gulnara Katkeeva
GBG. Burkitseterkyzy
G. Burkitseterkyzy
IOI. M. Oskembekov
I. M. Oskembekov
EZE. M. Zhunusov
E. M. Zhunusov
In order to improve the efficiency of sulfidization methods for oxidized ores, the problem of reducing the energy intensity of the process must be solved. In this regard, a promising method is the sulfidization of oxidized copper ores using a modified reagent that allows the process to be conducted without heating or any separate equipment. The modified sulfidizing agent designed to improve the efficiency of flotation concentration is produced by the mixing of sodium polysulfide and ammonium sulfate solutions. Comparative flotation experiments were conducted using pre-sulfidized oxidized copper ore containing 1.2 % of total copper, of which 1.08 % (or 90 %) was oxidized copper. The possibility of carrying out the sulfidization process in a flotation cell without forced heating of the reaction mixture has been established. At the same time, the modified reagent exceeds sodium polysulfide in terms of its flotation efficiency by 5 %. The chemical analysis of the processing products for the content of oxidized copper has demonstrated that its mass fraction decreased from 1.08 to 0.63 %. The experimental design method has been used to establish the best application conditions for the modified reagent. These are: the reagent consumption of 2.6 kg/t; slurry agitation with the sulfidizing agent for four minutes; and the collector (potassium butyl xanthate) consumption for the flotation process of 500 g/t. The copper recovery was 69.85 %. A mathematical model was designed for the flotation process with preliminary sulfidization of the oxidized copper ore in the form of a generalized miltifactorial equation.The work was performed with the grant support of the Ministry of Education and Science of the Republic of Kazakhstan (grant No. AP05130143).