This paper investigates frequency manoeuvring as a method to improve the resilience of unmanned aerial vehicle (UAV) networks operating in contested electromagnetic environments. The study considers scenarios in which the network initially operates on a single channel and is then exposed to intentional jamming or unintentional interference affecting the primary channel, adjacent channels or a wider frequency range. Several response policies are compared, including no channel change, immediate switching after quality degradation is detected, delayed switching after a defined loss-of-connectivity interval, and periodic frequency hopping. In addition to channel switching, the analysis also considers changes in channel bandwidth, comparing narrower channels with lower throughput but potentially higher resistance to interference against wider channels with greater capacity but increased susceptibility to disruption. The evaluation includes the switching cost, which is modelled as temporary packet loss, additional delay and jitter during reconfiguration. Performance is assessed using the packet delivery ratio, latency, jitter, packet loss and communication continuity. The main objective is to identify the interference conditions under which frequency manoeuvring becomes operationally beneficial and to determine which policy offers the best trade-off between resilience and communication performance. In quantitative terms, immediate switching under environmental interference achieved a PDR of 0.961 and a mean latency of 123.6 ms compared with a PDR of 0.946 and a mean latency of 138.7 ms for fixed-channel operation. Manoeuvring gave a substantial 12.2-percentage-point PDR gain under jamming (periodic hopping: 0.780 vs. 0.658) and a 6.7-percentage-point gain under combined interference (0.674 vs. 0.607). These results indicate that manoeuvring is most worthwhile once interference is persistent and channel-focused rather than purely environmental.
Accurate velocity estimation in GPS-denied environments remains a core challenge for autonomous unmanned aerial vehicle (UAV) navigation. Our previous work demonstrated that fusing optical flow (OF) with dead reckoning (DR) substantially reduces position drift compared to inertial-only solutions. However, velocity estimates derived from dense optical flow are degraded by two systematic effects: (1) incorrect metric scaling when the camera footprint covers heterogeneous terrain types—particularly at forest–field transitions where the visible surface elevation differs significantly from bare-ground elevation; and (2) flow magnitude bias introduced by scene texture and structural properties. This paper presents three targeted improvements to a software pipeline for optical flow-assisted UAV navigation. First, single-point above-ground-level (AGL) estimation is replaced by camera footprint area mean sampling over co-registered Digital Terrain Model (DTM) and Digital Surface Model (DSM) rasters, with the surface model adopted consistently for OF metric scaling. Second, a one-dimensional Kalman filter with an innovation gate suppresses velocity spikes caused by abrupt terrain transitions. Third, a compact data-driven correction module uses selected flow, texture, and terrain descriptors to estimate a multiplicative velocity correction factor aligned with GPS-derived reference speed available during calibration and offline evaluation but not required during GPS-denied operation. Experiments on three real PX4-logged flight missions (Log 258 for calibration and Logs 259–260 for independent evaluation) totalling 7.3 min show terrain-dependent behaviour. On the mixed forest–field validation flight (Log 260), the improved pipeline reduces velocity mean absolute error (MAE) by 71% (1.04 m/s → 0.30 m/s) and dead-reckoning position MAE by 88% (59.8 m → 7.1 m), compared to the baseline from our previous work. On a flat open-terrain validation flight (Log 259), the terrain-aware modifications leave the terrain-insensitive baseline essentially unchanged, providing a control case for the proposed DSM-based scaling mechanism.