Ying Zhang

Prof. Dr. Ying Zhang

orcid

Research Focus & Metrics

Academic Career Length

15Years (2012-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 May 2023 in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
Verified
Journal Article
Closed access
XCXin Chen
Xin Chen
YBYuxin Bai
Yuxin Bai
JCJianpeng Cao
Jianpeng Cao
LWLei Wang
Lei Wang
XZXinjie Zhou
Xinjie Zhou
WLWeiqiang Liu
Weiqiang Liu
As the feature size of the nanoscale CMOS keeps scaling down, the charge sharing effect is becoming more and more prominent, and the occurrence possibility of the triple-node upset (TNU) increases obviously. Therefore, this article proposes a TNU-tolerant latch with low overhead (TTLL), which achieves a good tradeoff between reliability and design overhead. The high reliability against the TNU of the TTLL latch mainly depends on the structure of two interlocking rings and the output recovery module. Meanwhile, the clock-gated and high-speed path technology is utilized cleverly to optimize power consumption and propagation delay performance. Simulation results in the 28-nm CMOS process show that the TTLL latch has the minimum delay-power-area product (DPAP) among all reported latches for a wide range of operating conditions and under typical conditions achieves on average $1.11\times $ , $10.34\times $ , and $18.44\times $ reductions in power, delay, and DPAP, respectively.

8 April 2024 in IEEE Transactions on Circuits and Systems I: Regular Papers
Verified
Journal Article
Closed access
XCXin Chen
Xin Chen
YBYuxin Bai
Yuxin Bai
HCHao Cai
Hao Cai
CZCongyi Zhu
Congyi Zhu
XZXinjie Zhou
Xinjie Zhou
WLWeiqiang Liu
Weiqiang Liu
Ultra-dynamic voltage scaling (UDVS) is a popular trade-off technique between delay and power performance. However, voltage scaling will degrade the radiation-aware reliability of traditional latch obviously. In addition, although the shrinkage of feature sizes results in the reduction of latch area, the occurrence possibility of double node upset (DNU) and triple node upset (TNU) events are increasing. Achieving a good balance among delay, power, area and reliability performance is becoming an important issue in the design of radiation-hardened latches, especially considering the coming commercial aerospace applications. Therefore, this paper proposes a TNU self-recoverable latch with wide voltage range (TRLW), which is low overhead and very suitable for UDVS technique. The TRLW latch is mainly composed of two completely interlocking triangle structures, and is able to self-recover from any possible TNU event. Clock-gated isolated cells are skillfully utilized to avoid current conflict. Meanwhile, six transmission gates are carefully integrated into TRLW latch to reduce the propagation delay $\textit{t}_{d2q}$ and critical path delay $\textit{t}_{crit}$ . Accordingly, the overall performance of TRLW latch is always excellent from normal voltage to near-threshold voltage (NTV). Simulation results based on 28nm CMOS process show that TRLW latch can achieve complete SNU, DNU and TNU self-recovery in all possible cases, and the soft error rate of TRLW latch only raises by 4.6 $\%$ when the supply voltage is decreased from 0.9 V to 0.3 V. Moreover, compared with the other reported TNU self-recovery latches, TRLW latch consistently achieves the minimum delay, power, area and delay-power-area product (DPAP) under different process, voltage and temperature (PVT) conditions, and obtains average reductions of 3.43 $\times$ , 3.03 $\times$ , 2.66 $\times$ , 1.40 $\times$ and 10.83 $\times$ for $\textit{t}_{d2q}$ , $\textit{t}_{crit}$ , power, area and DPAP when operating from 0.5 V to 1.0 V.

12 October 2023 in IEEE Transactions on Circuits and Systems II: Express Briefs
Verified
Journal Article
Closed access
YBYuxin Bai
Yuxin Bai
XCXin Chen
Xin Chen
XZXinjie Zhou
Xinjie Zhou
YYYanan Yin
Yanan Yin
YZYing Zhang
Ying Zhang
This brief presents a double node upset (DNU) self-recoverable latch (DRLW) for wide voltage range through a clock-gated recovery array and a short critical path. Implemented in a 28nm CMOS process, DRLW latch provides 0.83×, 2.34× and 5.25× average reductions in power, delay and delay-power-area product (DPAP) among all considered latches at 0.9V/1GHz, respectively. At the worst-case, DRLW latch is able to operate steadily at 0.25V/250KHz and always keeps the highest operating frequency and lowest power consumption compared with the considered latches in near-threshold voltage (NTV) region. Moreover, both at the extreme process, voltage, temperature (PVT) conditions and NTV region, DRLW latch can achieve DNU self-recovery for all internal and output nodes.

16 February 2022 in IET Computers & Digital Techniques
Verified
Journal Article
Open access
PDF file
YZYing Zhang
Ying Zhang
SLSen Li
Sen Li
XCXin Chen
Xin Chen
JYJiaqi Yao
Jiaqi Yao
ZMZhiming Mao
Zhiming Mao
YHYifeng Hua
Yifeng Hua
Coping with the problem of malicious third‐party vendors implanting Hardware Trojan (HT) in the circuit design stage, this paper proposes a hybrid‐mode gate‐level hardware Trojan detection platform based on the XGBoost algorithm. This detection platform is composed of multi‐level HT localization and circuit structure based HT detection. Each wire of the circuit is regarded as a node in multi‐level HT localization, and static characteristics of nodes are analysed, combining with dynamic detection to locate HT. The network structure features of the circuit are extracted in modular HT structure detection, aiming to identify HT accurately and rapidly. The hybrid‐mode HT detection platform can efficiently meet various detection requirements, such as HT localization or rapid and accurate HT detection. The experiment results on Trust‐Hub benchmark show that the multi‐level localization can achieve 94.0% location accuracy, and the modular HT structure detection accuracy can achieve 100%. The modular HT structure detection is about four times as fast as the multi‐level HT localization on feature extraction. Therefore, multi‐level localization and modular HT structure detection can be respectively or cooperatively applied for specific HT detection issues, which proves that the proposed hybrid‐mode gate‐level HT detection scheme is practical and effective.

25 February 2024 in Electronics
Verified
Journal Article
Open access
PDF file
XCXin Chen
Xin Chen
YXYudong Xie
Yudong Xie
LHLiangzhou Huo
Liangzhou Huo
KCKai Chen
Kai Chen
CGChanghao Gao
Changhao Gao
YZYing Zhang
Ying Zhang
Due to the advantages of parallel architecture and low power consumption, a field-programmable gate array (FPGA) is typically utilized as the hardware for convolutional neural network (CNN) accelerators. However, SRAM-based FPGA devices are extremely susceptible to single-event upsets (SEUs) induced by space radiation. In this paper, a fault tolerance analysis and fault injection experiments are applied to a CNN accelerator, and the overall results show that SEUs occurring in a control unit (CTRL) lead to the highest system error rate, which is over 70%. After that, a hybrid hardening strategy consisting of a finite state machine error-correcting circuit (FSM-ECC) and a triple modular redundancy automatic hardening technique (TMR-AHT) is proposed in this paper to achieve a tradeoff between radiation reliability and design overhead. Moreover, the proposed methodology has very small workload and good migration ability. Finally, by full exploiting the fault tolerance property of CNNs, a highly reliable CNN accelerator with the proposed hybrid hardening strategy is implemented with Xilinx Zynq-7035. When BER is 2 × 10−6, the proposed hybrid hardening strategy reduces the whole system error rate by 78.95% with the overhead of an extra 20.7% of look-up tables (LUTs) and 20.9% of flip-flops (FFs).

25 June 2021 in IET Circuits, Devices & Systems
Verified
Journal Article
Open access
PDF file
YZYing Zhang
Ying Zhang
MGMinghui Ge
Minghui Ge
XCXin Chen
Xin Chen
JYJiaqi Yao
Jiaqi Yao
ZMZhiming Mao
Zhiming Mao
Modern electronic systems usually use third‐party IP cores to build basic blocks. However, there may be Hardware Trojans (HTs) in IP cores, which will cause critical security problem. There are already many HT detection methods which claim to detect all publicly available HT benchmarks. But these methods can still be defeated by designing novel HTs. In this article, a method called Blinding HT is proposed, which camouflages itself as a normal circuit and is difficult to be triggered. The Blinding HT hides input signals of HT modules by tracing across multiple sequential levels. This method increases the influence of HT trigger inputs on output signals, so that trigger inputs are not be identified as redundant inputs. In this way, this approach can defeat the detection methods which identify weakly affecting trigger inputs and redundant trigger inputs across multiple sequential levels. As shown in the experimental results, the proposed HTs are hardly detected even by the novel HT detection approach based on machine learning algorithm. These HTs have small footprints on the design in terms of area and power to resist the side‐channel effect analysis. The proposed HT has stealthiness, general applicability and imperceptibility.