We have studied the role of defects on the magnetic properties of carbon materials using first-principles density functional methods. We show that, while the total magnetization decreases both for diamond and graphite with increase in vacancy density, the magnetization decreases more rapidly for graphitic structures. The presence of nitrogen nearby a vacancy is shown to produce larger macroscopic magnetic signals as compared to a standalone carbon vacancy. The results indicate the possibility of tuning magnetization in carbon by controlled defect generation and doping.

2-Dimensional structures with swift optical response have several technological advantages, for example they could be used as components of ultrafast light modulators, photo-detectors and optical switches. Here we report on the fast photo switching behavior of thin films of liquid phase exfoliated MoS₂, when excited with a continuous laser of λ = 658 nm (E = 1.88 eV), over a broad range of laser power. Transient photo-conductivity measurements, using an optical pump and THz probe (OPTP), reveal that photo carrier decay follows a bi-exponential time dependence, with decay times of the order of picoseconds, indicating that the photo carrier recombination occurs via trap states. The nature of variation of photocurrent with temperature confirms that the trap states are continuously distributed within the mobility gap in these thin film of MoS₂ and play a vital role in influencing the overall photo response. Our findings provide a fundamental understanding of the photo-physics associated with optically active 2D materials and are crucial for developing advanced optoelectronic devices.

This review article presents a comprehensive update on the recent research trends, advancement and future outlook of selected layered selenide based binary compounds featuring elements from group III, IV, and V of the periodic table.

A label-free immunosensor from as-grown double wall carbon nanotubes (DW) bundles was developed for detecting Salmonella typhimurium. The immunosensor was fabricated by using the as-grown DW bundles as an electrode material with an anti-Salmonella impregnated on the surface. The immunosensor was electrochemically characterized by cyclic voltammetry. The working potential (100, 200, 300 and 400 mV vs. Ag/AgCl) and the anti-Salmonella concentration (10, 25, 50, 75, and 100 μg/mL) at the electrode were subsequently optimized. Then, chronoamperometry was used with the optimum potential of 100 mV vs. Ag/AgCl) and the optimum impregnated anti-Salmonella of 10 μg/mL to detect S. typhimurium cells (0-109 CFU/mL).