In this work, to measure the complex permittivity and complex permeability of materials, the double planar sample method is proposed, which is a variant of the classical free-space measurementmethod. The device under test is adouble planar sample instead of a single piece of sample. The greatest advantage of this method is that it eliminates complicated calibration in the measurement of reflection coefficient.In this novel method, the reflection coefficient is replaced by a second transmission coefficient. Two groups of transmission coefficients are obtained by changing the distance between these double planar samples, thenthe complex permittivity and complex permeability by the transmissioncoefficient are retrieved. The relative uncertainties of and are both 1%. Five materials (PTFE, mylar, silicon, quartz and leaf of banana) are measured by this method, the results of which are consistent with those reported in literature.The relative uncertainty of this method and the conventional free-space method is consistent. However, the magnetic loss tangent is very small, and the retrieval method is not sensitive to it.
3 April 2024 in IEEE Transactions on Electromagnetic Compatibility
In this article, an energy-saving glass with a dual-band miniaturized element frequency selective surface (MEFSS) to enhance the electromagnetic shielding performance while maintaining high optical transparency is proposed, which can reduce interference from wireless communication devices. The reflection bands are located near 2.4 and 3.5 GHz, commonly used by mobile devices for Bluetooth, Wi-Fi, and LTE. This MEFSS has angular stability from 0°–80°, the dimension of which is 0.096 λ 0 × 0.096 λ 0 . The widths of both reflection bands meet the operating demand as the angle of incidence reaches 80°. The shielding effectiveness (SE) is better than 36 dB under normal incidence, and the optical transparency is about 86%. The equivalent inductances and capacitances in the equivalent circuit model (ECM) are obtained based on the electric and magnetic field distributions, and the results calculated by the ECM are consistent with those of the full-wave simulation. In addition, the prototype is fabricated and tested for validation. It provides more than 21 dB band stop responses in 2.4 and 3.5 GHz bands. Furthermore, the test results and the simulation data agree well when the incident angle reaches 70°. The SE in the operation bands exceeds 10 dB for TE and TM polarizations, as the incident angle varies from 0° to 70°.
5 November 2024 in IEEE Transactions on Electromagnetic Compatibility
In this article, a novel conformal frequency selective surface (FSS) with dual reflection bands located at X and Ku bands and a transmission window near 12 GHz is proposed, which brings little aberration in the far-field pattern. The unit cell consists of double flower-shaped strips on an ultrathin dielectric slab. The equivalent circuit model is established by the field distributions to illustrate the resonant mechanism, the parameters of which are calculated. The planar and elliptic cylindrical samples are fabricated and tested. The test results are consistent with simulation data. The two samples’ averages of shielding effectiveness are no less than 16 dB. The insertion losses of the planar and the curved FSS are less than 1 dB in the passband. The near-field distributions in three concerned bands are scanned. The conformal FSS excites slight distortion in the passband but stirs the distributions into a mess, the electric field intensity of which drops by 20 dB in the stopbands. Moreover, the absolute gains in the passband are tested in compact antenna test range. The far-field pattern is also evaluated by near-field to far-field method. The data obtained by two methods is consistent with the simulation. Little aberration by the FSS occurs in the passband, and the average gain's deviation is no more than 0.64 dB.
In space-borne quasi-optical feed system, frequency selective surface (FSS) should meet both electrical properties and mechanical requirements. In the paper, we design and fabricate three FSSs to achieve these goals. We present a novel FFS with phase compensation structure correcting the beam distortion. The phase compensation structure consists of short-ended circular waveguide array, inspired by the idea of reflect array antenna. The first FSS meets the need of electrical performance, however, which is too weak to pass the mechanical test. The second one overcomes the former problem, but brings the aberration in reflection beam, due to the discontinuity of the reflection phase. The third one with phase compensation structure meets all the demands. The insertion phase of the unit cell compensates 119 and 183 GHz two reflection bands, reconfigures the field distributions on the cross section of beam waist simultaneously. What’ more, this FSS extends the functionality of the original FSS. To some extent, the FSS with phase compensation structure shares the ellipsoidal reflector’s pressure to adjust the beam.
Nanocomposites consisting of fine particles of spirulina coated with pure iron are able to change the dielectric permittivity and the magnetic permeability. The spirulina coated with pure iron is introduced as a kind of absorbing material, whose dielectric permittivity is ~4-0.5j and the magnetic permeability is ≃ 2.7-0.35j. The physical explanation of the fact that the spirulina structures contribute to the electromagnetic characteristics in W-band (75-110 GHz) is analyzed by the theory of the electrically small bifilar helix antenna. In addition, a black body is designed and fabricated. The emissivity of the black body is above 0.994 for both the TE and TM polarizations in the whole W-band, which meets the demanding of the remote sensing of the atmosphere.
Near-field focused antennas are one of the most widely concerned industrialization research studies. Among these application scenarios, the microwave near-field focused lens based on transmitarray is one of the intensively designs, which usually consist of Multilayer Frequency Selective Surface (M-FSS). In this paper, the theoretical relationship between the transmission response of a single-layer FSS and that of an M-FSS is established, taking into account the interlayer interactions. Through the derived results, a transmitted element based on four-layer FSS was swiftly identified, which could achieve a phase shift of approximately 330 degrees with a transmission magnitude of better than -1.5 dB. A 3-bit quantized near-field focused lens was subsequently designed, fabricated, and tested, whose operating frequency band is 20.5-21.7 GHz. The simulated and measured results show that the presented near-field focused lens has good electromagnetic wave convergence. Both the simulation and measurement verify the validity of the derived expression, indicating its availability for M-FSS transmitarray element design, thereby streamlining the design process.