The development of high-capacity, stable cycling, and high mass loading cathode materials for asymmetric supercapacitors has been the subject of intense exploration. In this work, a well-aligned zinc–nickel–cobalt ternary (oxy)hydroxide (Zn–Ni–Co TOH) nanostructure with a controlled morphology is used, for the first time, as a high-performance cathode material for supercapacitors. Our findings demonstrate that precursor Zn–Ni–Co TOH materials can deliver superior capacity and rate capability to the Zn–Ni–Co oxide. A high mass loading of 7 mg cm−2 on a carbon cloth substrate is achieved, accompanied by substantially improved facile ionic and electronic transport due to the highly open well-defined nanoarray architecture. The growth mechanism of Zn–Ni–Co TOH was studied in depth by scanning electron microscopy analysis. The optimized Zn–Ni–Co TOH-130 nanowire array electrode delivered an outstanding areal capacitance of 2.14 F cm−2 (or a specific capacitance of 305 F g−1) at 3 mA cm−2 and an excellent rate capability. Moreover, the asymmetric supercapacitor assembled with our Zn–Ni–Co TOH-130 cathode exhibited a maximum volumetric energy density of 2.43 mW h cm−3 at a volumetric power density of 6 mW cm−3 and a long-term cycling stability (153% retention after 10 000 cycles), which is superior to the majority of the state-of-the-art supercapacitors. This work paves the way for the construction of high-capacity cathode materials for widespread applications including next-generation wearable energy-storage devices.
The electrochemical reduction of carbon dioxide (CO2) into value‐added fuels and chemicals presents a sustainable route to alleviate CO2 emissions, promote carbon‐neutral cycles and reduce the dependence on fossil fuels. Considering the thermodynamic stability of the CO2 molecule and sluggish reaction kinetics, it is still a challenge to design highly efficient electrocatalysts for the CO2 reduction reaction (CO2RR). It has been found that the surface and interface chemistry of electrocatalysts can modulate the electronic structure and increase the active sites, which is favorable for CO2 adsorption, electron transfer, mass transport, and optimizing adsorption strength of reaction intermediates. However, the effect of surface and interface chemistry on metal‐free electrocatalysts (MFEs) for CO2RR has not been comprehensively reviewed. Herein, we discuss the importance of the surface and interface chemistry on MFEs for improving the electrochemical CO2RR performance based on thermodynamic and kinetic views. The fundamentals and challenges of CO2RR are firstly presented. Then, the recent advances of the surface and interface chemistry in improving reaction rate and overcoming reaction constraints are reviewed from regulating electronic structure, active sites, electron transfer, mass transport, and intermediate binding energy. Finally, the research challenges and prospects are proposed to suggest the future designs of advanced MFEs in CO2RR.
An ultrahigh loaded MoO3−x electrode was developed with improved rate capability through incorporating layered structure graphite sheets and oxygen functional groups.