Under hull–propulsor coupling conditions, the geometric shape of an unmanned underwater vehicle (UUV) can significantly affect the inflow conditions of the aft rim-driven thruster (RDT) and, consequently, its propulsive performance. However, the number of UUV shape design parameters is relatively large, and their influences on the propulsive efficiency of the RDT differ markedly. If an equal-weight search strategy is still adopted for optimization, the computational cost will increase and the optimization efficiency will be reduced. To address this issue, this paper proposes an efficient global-sensitivity-information-driven sequential surrogate-based optimization method for the shape optimization design of the UUV, with the aim of improving the propulsive efficiency of the RDT corresponding to the self-propulsion equilibrium state under the cruise condition. Based on the hull–propulsor coupled numerical model of the UUV and RDT, the proposed method obtains the propulsive efficiency of the RDT at the self-propulsion point under the cruise condition by solving the self-propulsion equilibrium condition. On this basis, Sobol global sensitivity analysis is performed using the Kriging surrogate model to quantitatively evaluate the influence of the UUV shape design parameters on the propulsive efficiency of the RDT. Then, the global sensitivity information is mapped into optimization weights. Based on this, the minimum of surrogate prediction (MSP) and expected improvement (EI) sampling criteria are introduced. In this way, a surrogate model sequential optimization method driven by global sensitivity information is developed. The optimization results show that, after optimizing the UUV external shape, the propulsive efficiency of the RDT under the cruise condition is increased by 22.83%, thereby verifying the effectiveness of the proposed method.
For AUVs operating under large-rudder-angle yaw maneuvering conditions, linearized hydrodynamic-derivative models often fail to accurately capture strongly nonlinear flow effects, and the applicability of control parameters becomes limited. To address these issues, this paper proposes a CFD-in-the-loop control simulation and parameter optimization framework for large-rudder-angle yaw maneuvers. Based on a coupled hull–propeller–rudder solution method, an unsteady CFD motion simulation model is developed that simultaneously accounts for propeller wake, rudder inflow, and hull-flow interaction, thereby enabling a strongly coupled solution of flow-field evolution and the six-degree-of-freedom motion of the vehicle. On this basis, a CFD-in-the-loop closed-loop control simulation framework is established by integrating the controller, actuator dynamic model, virtual sensors, and CFD motion simulation module into a unified framework, thereby realizing closed-loop computation of control input, flow response, motion update, and state feedback. Furthermore, under the same controller structure and parameter settings, the large-rudder-angle yaw responses predicted by the linearized hydrodynamic-derivative model and the CFD-in-the-loop simulation framework are compared and analyzed. This comparison reveals the dependence of control parameters on the underlying dynamic model and highlights their limited applicability under strongly nonlinear operating conditions. Finally, to address the high computational cost of CFD-in-the-loop simulations, a surrogate-model-based control parameter optimization method is developed to improve parameter tuning efficiency and enhance closed-loop control performance. The results show that the proposed CFD-in-the-loop control simulation framework can effectively characterize the nonlinear hydrodynamic effects arising during large-rudder-angle maneuvers, and provides a more physically consistent basis for control parameter optimization, analysis, and design.