The proposed 8-bit Flash ADC design does not require resistor ladder circuit and it can operate at Giga Hz range with concurrent bubble error correction of 2nd order. It consists of 28 − 1 comparators and two encoding blocks. First encoding block is a 1 — out of — N coder circuit and the second consists of NAND and NOR gates i.e. a simple binary encoder. Threshold Inverter Quantizer (TIQ) technique is used in designing the comparators. There are many issues in a Flash ADC, out of which bubble error is one. Correction of bubble error reduces the loss of bits and provides much better resolution. This design provides low power, high speed and high resolution.
A modified dynamic comparator is proposed and compared in this paper. A dynamic comparator consists of a low gain amplifier connected to a latch circuit. The inputs are amplified during the evaluation period and the outputs are latched during the regeneration time. The proposed dynamic comparator is fast and consumes less power. At a clock frequency of 1.25GHz and 100mV ΔVin, the delay is 176.71ps and average power consumption is 119.81μW for a supply voltage of 1.8V. The calculated maximum PDP is 24.53 f. The proposed dynamic comparator is suitable for an efficient low power and high speed Flash ADC. The circuits are simulated in cadence virtuoso spectre with 180nm SCL technology.
1 January 2021 in IOP Conference Series: Materials Science and Engineering
A comparison of NMOS and PMOS input driving dynamic comparator is carried out in 45nm technology. NMOS driving dynamic comparator shows lesser delay and consumes less power as compared to PMOS driving comparator. The advantage of the later is the noise immunity at higher frequencies. The normalized energy-noise-delay-product (ENDP) for NMOS dynamic comparator and PMOS dynamic comparator is 2.08 and 4.48, respectively.
This paper depicts the idea of a novel bubbleerror corrector for removing the bubble error of order 1and consuming less power. The earlier bubble error corrector(BEC) needed large number of transistors thus requiring morepower. 3-input NAND gate with two inverted inputs is also usedas a BEC but it requires more power than the proposed one asit requires more number of transistors. With a supply of 1Vin 45nm technology, the BEC consumes 4.14 pico-Watt of dcpower and 9.62 micro-Watt of average power. The maximumdelay is calculated to be 20 pico-seconds. When used with Fattree encoder it consumes 0.3 nano-Watt of dc power and 27.34micro-Watt of average power and has a maximum delay of 74.76 pico-seconds.
The design of a 4‐bit encoder with a bubble error correction of first order is described in this study. Since encoder restricts speed of the flash analogue‐to‐digital converter (ADC), therefore, an improved and faster encoder is an essential requirement to push its limits. Encoder is divided into two parts: one‐hot code generator [or bubble error corrector (BEC)] and binary encoder. Binary encoder proposed in this study is the modified Fat‐Tree encoder of types I and II. Three types of BECs which have been compared in this study are OR gate based, NAND gate based and the proposed BEC. The proposed BEC consumes less power and provides better speed as compared to NAND based and OR gate based BECs. It can be further employed for higher order bubble correction as well. The proposed BEC consumes dynamic power of 87.071 μW and leakage power of 18.3563 pW exhibiting the delay of 38.3 ps with 1.8 V supply voltage and 1 GHz clock frequency. It has a power‐delay product of 3.335 fJ, energy‐delay product of 127.7305 Js and an intrinsic area of 4.753 mm 2 .