Inter-turn faults are one of the most important issues in line-start permanent magnet synchronous motors (LSPMSMs). To date, steady-state operating conditions of LSPMSMs have been analyzed in studies focusing on diagnosing this fault. However, no studies have been conducted for nonstationary operating conditions, such as variable speed or variable load conditions, which are common in the industry. This paper presents a novel approach for fault harmonic component (FHC) tracking based on transient-MCSA to diagnose inter-turn faults in an LSPMSM operating under nonstationary conditions. First, the inter-turn failure model of LSPMS was analyzed to show the fault effect on motor current, and the most dominant inter-turn FHC in the order and frequency domains were determined. Then, using Gabor-OT, inter-turn FHC signals were extracted from motor current signals in the frequency domain and reconstructed in the time domain. Intrinsic mode functions (IMFs) were calculated by decomposing the reconstructed FHC signals (RFHCSs) via ensemble empirical mode decomposition. Using the energies of RFHCSs, calculated based on Gabor coefficients, and the Kullback–Leibler divergences of the selected IMFs, diagnosis of the inter-turn faults and detection of the severity of the faults was performed. The results are in agreement with the results in the literature, thus showing that the proposed method is a successful and useful means for detecting inter-turn faults in LSPMSMs.
This study presents design and performance analyses for a new line start axial flux permanent magnet synchronous motors (AF‐PMSMs). The innovative part of this study is that AF‐PMSM can start directly from the line and operate with high efficiency and power factor after synchronisation. Prototype manufacturing was carried out after completing the analytical and electromagnetic designs for the targeted motor. The synchronisation capacity, power capacity, power–speed characteristic, power‐efficiency relationship along with the total harmonic distortion and back‐emf waveform of the induced voltage have been examined for the prototype motor. Simulation studies have been verified experimentally. The results obtained were compared with an induction motor with the same power. It was observed as a result of the work carried out and a line start AF‐PMSM is obtained that is 4–10% more efficient in comparison with an induction motor having the same power.
31 January 2020 in Balkan Journal of Electrical and Computer Engineering
Stator winding faults may cause severe damages in Permanent Magnet Synchronous Motors (PMSM) if not detected early on. The earliest fault detection in motors should be made during transient states throughout the initial starting period. A new approach based on Empirical Mode Decomposition (EMD) and statistical analysis was presented for detecting stator winding fault by way of transient state phase current of PMSM in this study. Models based on finite elements method were developed for the PMSM representing the healthy and faulty states in order to implement the suggested fault detection method. Afterwards, transient state stator phase winding currents were measured for healthy and faulty states under nominal load in accordance with motor models. These non-linear current signals monitored were separated into its Intrinsic Mode Functions (IMF) via the EMD method. Pearson Correlation Coefficient was used for determining the IMF that most resembles the characteristics of the main signal. Statistical parameter-based feature extractions were carried out for the IMF signals determined for the healthy and faulty states. Fault and fault level detection were carried out successfully by comparing the obtained feature vectors. The acquired results have put forth that the suggested method can be used securely for fault detection in electrical machines especially for early fault detection.
19 May 2024 in Journal of Computational Electronics
Three-phase induction motors are among the most frequently used motors in industrial areas due to their simple structure, low cost, power specifications, etc. Electric energy consumption from these motors accounts for 68% of the energy used by all motors. The faults that occur in these motors over time decrease motor efficiency and result in significant energy consumption. In this study, a new method based on spectral subtraction (SS) was suggested for determining broken rotor bar (BRB) faults in these motors. The traditional method of motor current signature analysis via Fast Fourier Transform (FFT) is hard to use to diagnose BRB faults because the sideband characteristics used as a fault indicator are also seen in the healthy state at low amplitude levels. In the proposed fault detection method, the FFT of both healthy case and faulty case current signals were calculated and then the SS signal is obtained by subtracting the FFT of the healthy motor from the faulty motor for each time step. In the residual SS signal, fault detection was performed by examining the amplitude levels of the harmonic component of the BRB fault. Experimental results indicate that BRB faults can be successfully detected in squirrel-cage rotor induction motors using the suggested method.