Treating ballast and subgrade soil as an integrated unit for sampling and loading has proven to be an effective method for investigating the interaction between ballast and subgrade soil. Given that direct testing of specimens containing large ballast is constrained by the capabilities of standard laboratory equipment, adopting a model material of smaller size is recommended. Parallel gradation method is widely used for this purpose. This study performed an evaluation of parallel gradation method based on the response of ballast penetration into subgrade soil. Discrete element models were developed to simulate the penetration of crushed ballast, featuring three different parallel gradations, into subgrade soil. On this basis, dynamic triaxial simulations were conducted on these models. By comparing the macroscopic and mesoscopic mechanical characteristics at different scaling ratio, the applicability of the parallel gradation method for assessing ballast penetration into subgrade soil was evaluated. At the macroscopic scale, the scaling ratio of crushed ballast significantly influences the axial, volumetric, and lateral deformations observed during penetration into subgrade soil. Specifically, a smaller average grain size of ballast correlates with reduced deformations in these specimens. The penetration of crushed ballast into subgrade soil significantly increases the porosity of subgrade soil, particularly at the interface between ballast and subgrade. This increase in porosity is more pronounced with larger average grain sizes of ballast. At the mesoscopic scale, larger average grain sizes of ballast lead to more localized high contact forces and more significant stress concentrations. The parallel gradation method substantially affects the mechanical properties of ballast penetration into subgrade soil, at both macroscopic and mesoscopic scales. Therefore, a cautious approach is necessary when relying on this method for precise assessments.
Node thickening is a way to strengthen the nodes of a geogrid. Increasing the node thickness in conventional biaxial geogrids enhances the interface frictional strength parameters and improves its three-dimensional reinforcement effect. Based on the triaxial tests of aeolian sand, single-rib strip tests of geogrids, and pull-out tests of geogrid in aeolian sand, a three-dimensional discrete element pull-out model for geogrids with strengthened nodes was developed to investigate the mechanical performance of an aeolian sand–geogrid interface. The influences of increasing node thickness, the number of strengthened nodes, and the spacing between adjacent nodes on the mechanical performance of the geogrid–soil interface were extensively studied used the proposed model. The results demonstrated that strengthened nodes effectively optimize the reinforcing performance of the geogrid. Among the three node-thickening methods, that in which both the upper and lower sides of nodes are thickened showed the most significant improvement in ultimate pull-out resistance and interface friction angle. Moreover, when using the same node-thickening method, the ultimate pull-out resistance increase shows a linear relationship with the node thickness increase and the strengthened node quantity. In comparison with the conventional geogrid, the strengthened nodes in a geogrid lead to a wider shear band and a stronger ability to restrain soil displacement. When multiple strengthened nodes are simultaneously applied, there is a collective effect that is primarily influenced by the spacing between adjacent nodes. The results provide a valuable reference for optimizing the performance of geogrids and determining the spacing for geogrid installation.
Straw fiber curtain contains a plant fiber blanket woven from crop straw, which is mainly used to protect embankment slopes from rainwater erosion. To investigate the erosion control performance of slopes covered with straw fiber curtains of different structural configurations, physical model tests were conducted in a 95 cm × 65 cm × 50 cm (length × height × width) test box with a slope ratio of 1:1.5 under controlled artificial rainfall conditions (20 mm/h, 40 mm/h, and 60 mm/h). The study evaluated the runoff characteristics, sediment yield, and key hydrodynamic parameters of slopes under the coverage of different straw fiber curtain types. The results show that the A-type straw fiber curtain (woven with strips of straw fiber) has the best effect on water retention and sediment reduction, while the B-type straw fiber curtain (woven with thicker straw strips) with vertical straw fiber has a better effect regarding water retention and sediment reduction than the B-type transverse straw fiber curtain. The flow of rainwater on a slope covered with straw fiber curtain is mainly a laminar flow. Straw fiber curtain can promote the conversion of water flow from rapids to slow flow. The Darcy-Weisbach resistance coefficient of straw fiber curtain increases at different degrees with an increase in rainfall time.
University construction projects often lack complete design information during the decision-making and schematic design stages, which makes it difficult to balance efficiency and accuracy in investment cost estimation. To improve the prediction and interpretation of unit area cost, this study develops a CatBoost-based investment cost estimation framework using 72 completed university construction projects. Eleven project indicators related to structural system, foundation type, seismic grade, number of floors, delivery standard, green building rating, fire door type, window type, and finishing configuration were initially considered as candidate input variables. Feature importance was evaluated using RF-MDI, permutation-MDA, and SHAP values derived from the CatBoost model within the repeated five-fold cross-validation framework, and delivery standard was excluded because it showed the lowest comprehensive contribution. The final CatBoost model was compared with RF, XGBoost, GBDT, LightGBM, and BP neural network models using repeated five-fold cross-validation. CatBoost achieved the best average performance among the compared models, with , RMSE = CNY/m2, and MAE = CNY/m2. The results suggest that CatBoost provides relatively better prediction accuracy under the current dataset and validation framework, while the relatively low values and performance fluctuations indicate that further validation using larger and more complete datasets is still required.