Peroxymonosulfate (PMS, SO52−)-based oxidation is an efficient pathway for degrading organic pollutants, but it still suffers from slow degradation efficiency and low PMS utilization. In this work, we report the preparation of porous Fe-doped g-C3N4 catalysts by one-step thermal polymerization using urea and transition metal salts as precursors and investigate the effect of atmosphere conditions (air and nitrogen) on the catalytic performance. Systematic characterizations show that Fe-doped g-C3N4 prepared in air (FeNx-CNO) has a larger specific surface area (136.2 m2 g−1) and more oxygen vacancies than that prepared in N2 (FeNx-CNN, 74.2 m2 g−1), giving it more active sites to participate in the reaction. Meanwhile, FeNx-CNO inhibits the recombination of photogenerated carriers and improves the light utilization. The redox cycling of Fe(III) and Fe(II) species in the photocatalytic system ensures the continuous generation of SO5•− and SO4•−. Therefore, FeNx-CNO can remove CBZ up to 96% within 20 min, which is 3.4 times higher than that of CNO and 3.1 times higher than that of FeNx-CNN, and the degradation efficiency can still retain 93% after 10 cycles of reaction. This study provides an economical and efficient method for photocatalysis in the degradation of medicines in contaminated water.
The peroxymonosulfate (PMS)-assisted photocatalytic process has shown considerable potential for the treatment of wastewater. g-C3N4-based catalysts are widely applied to eliminate organic pollutants in wastewater. However, the bulk catalyst prepared by dicyandiamide has the drawback of a low surface area (10 m2/g), while the porous catalyst prepared by urea suffers from a low catalyst yield based on urea (3.5%). To address these challenges, a porous V-doped carbon nitride (V/CN) was designed through one-step thermal polymerization using urea and dicyandiamide as the carbon nitride precursor and NH4VO3 as the V precursor. When the ratio of urea to dicyandiamide was 10:1, the yield of V/CN was improved, while it maintained a rich porous structure with a specific surface area (64.6 m2/g). The synergetic effect of V doping and nanosheet and hollow tubular structures facilitated the separation of photogenerated carriers, leading to boosting the photocatalytic activity of g-C3N4 in the PMS system. V/CN(10:1) could completely degrade CBZ within 20 min, exhibiting an equivalent catalytic efficiency comparable to that of V/CN prepared by urea (V/UCN), while markedly surpassing both V/DCN and CN prepared by urea alone (UCN) in performance. This study presents an economical and effective approach for the photocatalytic degradation of pharmaceutical pollutants in aquatic environments.
To in situ and efficiently degrade irreversible membrane contaminants under mild conditions, SiC ceramic membranes (CMs) were imparted a catalytic ozonation functionality. A spinel-type CoFe2O4 catalyst was fabricated via a citrate-assisted sol–gel method and subsequently impregnated into the macropores of SiC ceramic membranes through a urea-assisted one-step combustion technique. The as-prepared catalytic membranes (CoFe2O4-CM) were systematically characterized by SEM, EDS, XRD and XPS techniques, and the catalytic ozonation performance was evaluated in an integrated catalytic ozonation–membrane separation system (CoFe2O4-CM/O3). A flux recovery rate (FRR) of 93.33% was achieved at an ozone concentration of 70.27 mg·L−1 within 30 min, indicating that a catalytic self-cleaning membrane was successfully developed. The possible catalytic reaction mechanism was elucidated by identifying reactive oxygen species generated using free radical quenching tests and electron paramagnetic resonance (EPR) analysis. This study offers a promising and environmentally friendly strategy for ceramic membrane cleaning in various membrane separation fields.
5 June 2010 in Acta Crystallographica Section E Structure Reports Online
The Cu(II) atom in the title compound, [CuI(2)(C(20)H(14)N(4))], has a distorted square-pyramidal coordination formed by the N atoms of the tridentate 4'-(4-pyrid-yl)-2,2':6'2''-terpyridine (pyterpy) ligand and two I atoms; one of the I atoms is in the apical position. In contrast to other known square-pyramidal diiodido- and dibromidocopper complexes of the pyterpy ligand in which metal-halogen distances are significantly different, in the title compound the apical and equatorial Cu-I bonds are almost identical [2.6141 (8) and 2.6025 (8) Å, respectively].