In this paper a computational methodology leading to the development of a new class of FEs, based on the application of continuous and smooth approximation polynomials, being splines, has been presented. Application of the splines as appropriately defined piecewise elemental shape functions led the authors to the formulation of a new approach for FEM, named as spFEM, where contrary to the well-known NURBS approach, the boundaries of spFEs are well-defined, exactly as it is in the case of the traditional FEM. The current approach has been computationally verified by the authors it terms of high frequency dynamics including such problems as: spectra of natural frequencies, modes of natural vibrations as well as wave propagation problems, especially in the aspect of high frequency responses, all in the case of selected problems involving one- and two-mode theories of 1-D structural elements. The applicability of the proposed approach has been evaluated and compared, in terms of calculated dynamic responses, with the results obtained by the use of well-established FEM approaches: classical FEM as well as TD-SFEM. In all cases investigated by the authors the proposed spFEM approach turned out to be the most accurate approach, free from the main drawback of the other tested FEM approaches thanks to the class of differentiability of approximation polynomials, which guarantees the absence of frequency band gaps in calculated spectra of natural frequencies. A direct consequence of this feature of the proposed approach is that a larger part of the calculated spectra of natural frequency, the same as modes of natural vibrations, can effectively be used for more accurate calculations of dynamic reposes even in the case of multi-mode theories. This in contrast to the other tested FEM approaches.
Damage detection in structural components, especially in mechanical engineering, is an important element of engineering practice. There are many methods of damage detection, in which changes in various parameters caused by the presence of damage are analysed. Recently, methods based on the analysis of changes in dynamic parameters of structures, that is, frequencies or mode shapes of natural vibrations, as well as changes in propagating elastic waves, have been developed at the highest rate. Diagnostic methods based on the elastic wave propagation phenomenon are becoming more and more popular, therefore it is worth focusing on the improvement of the efficiency of these methods. Hence, a question arises about whether it is possible to shorten the required measurement time without affecting the sensitivity of the diagnostic method used. This paper discusses the results of research carried out by the authors in this regard both numerically and experimentally. The numerical analysis has been carried out by the use of the Time-domain Spectral Finite Element Method (TD-SFEM), whereas the experimental part has been based on the measurement performed by 1-D Laser Doppler Scanning Vibrometery (LDSV).
The paper presents an optimisation workflow for modelling of a periodic mechanical structure in the form of a multi-material, axisymmetric beam. The optimisation objective is to prescribe the positions and widths of selected band gaps within a target frequency range for three basic types of structural vibrations: flexural, longitudinal and torsional. The decision variables were geometric parameters of the unit cell and material properties of selected thermoplastics assigned to successive segments of the cell. The frequency characteristics of the beam were determined using the time-domain spectral finite-element method (TD-SFEM). This model was used to perform a sensitivity analysis using the Morris method, which showed the dominant influence of the beam geometry on the position and width of band gaps, with a relatively smaller role of material variability. Due to high computational costs of the global optimisation based on a FEM solver, a surrogate regression model in the form of a residual MLP network was developed to predict the positions and widths of the first five band gaps for each vibration type. The global search was carried out using a genetic algorithm (GA) with the surrogate model and then the results were refined using a deterministic goal-attainment method with a high-fidelity model.
4 September 2024 in Journal of Theoretical and Applied Mechanics
Mechanical periodic structures exhibit unusual dynamic behavior thanks to the periodicity of their structures, which can be attributed to their cellular arrangement. The source of this periodicity may result from periodic variations of material properties within their cells and/or variations in...