International and national travelling has made the rapid spread of infectious diseases possible. Little information is available on the role of major traffic hubs, such as airports, in the transmission of respiratory infections, including seasonal influenza and a pandemic threat. We investigated the presence of respiratory viruses in the passenger environment of a major airport in order to identify risk points and guide measures to minimize transmission. Surface and air samples were collected weekly at three different time points during the peak period of seasonal influenza in 2015–16 in Finland. Swabs from surface samples, and air samples were tested by real-time PCR for influenza A and B viruses, respiratory syncytial virus, adenovirus, rhinovirus and coronaviruses (229E, HKU1, NL63 and OC43). Nucleic acid of at least one respiratory virus was detected in 9 out of 90 (10%) surface samples, including: a plastic toy dog in the children’s playground (2/3 swabs, 67%); hand-carried luggage trays at the security check area (4/8, 50%); the buttons of the payment terminal at the pharmacy (1/2, 50%); the handrails of stairs (1/7, 14%); and the passenger side desk and divider glass at a passport control point (1/3, 33%). Among the 10 respiratory virus findings at various sites, the viruses identified were: rhinovirus (4/10, 40%, from surfaces); coronavirus (3/10, 30%, from surfaces); adenovirus (2/10, 20%, 1 air sample, 1 surface sample); influenza A (1/10, 10%, surface sample). Detection of pathogen viral nucleic acids indicates respiratory viral surface contamination at multiple sites associated with high touch rates, and suggests a potential risk in the identified airport sites. Of the surfaces tested, plastic security screening trays appeared to pose the highest potential risk, and handling these is almost inevitable for all embarking passengers.

A collaborative study on total aerobic bacterial count was conducted to validate the Hygicult^® TPC dipslide against contact plates and swabbing, using stainless-steel surfaces artificially contaminated with different microbes at various levels. Twelve laboratories took part in the validation procedure. The total number of collaborative samples was 108. The microbial level in each sample was assessed in triplicate using the 3 above-mentioned methods under 3 different incubation conditions (at 25 ± 1°C for 48 and 72 h and at 30 ± 1°C for 48 h). Surface sampling methods detached 25–30% at the lowest (theoretical yield, 1.4 cfu/cm²), 18–20% at the middle (theoretical yield, 10.7 cfu/cm²), and 16–21% at the highest (theoretical yield, 43.6 cfu/cm²) levels of microbes from the test surfaces. The percentage of acceptable results after removing outliers was 89%. Repeatability standard deviations ranged from 27.2 to 74.6% and reproducibility standard deviations ranged from 42.1 to 97.5%. There were no significant differences between results obtained at different incubation temperatures (25 and 30°C) or incubation times (48 and 72 h) for all 3 methods. The Hygicult TPC dipslide, contact plate, and swabbing methods gave similar results at all 3 microbial levels tested: 0.35–0.43 cfu/cm² at the lowest level, 1.9–2.2 cfu/cm² at the middle level, and 7.1–9.1 cfu/cm² at the highest level.

The worldwide spread of the SARS-CoV-2 virus has continued to accelerate, putting a considerable burden on public health, safety, and the global economy. Taking into consideration that the main route of virus transmission is via respiratory particles, the face mask represents a simple and efficient barrier between potentially infected and healthy individuals, thus reducing transmissibility per contact by reducing transmission of infected respiratory particles. However, long-term usage of a face mask leads to the accumulation of significant amounts of different pathogens and viruses onto the surface of the mask and can result in dangerous bacterial and viral co-infections. Zeolite imidazolate framework-8 (ZIF-8) has recently emerged as an efficient water-stable photocatalyst capable of generating reactive oxygen species under light irradiation destroying dangerous microbial pathogens. The present study investigates the potential of using ZIF-8 as a coating for face masks to prevent the adherence of microbial/viral entities. The results show that after 2 h of UV irradiation, a polypropylene mask coated with ZIF-8 nanostructures is capable of eliminating S. Aureus and bacteriophage MS2 with 99.99% and 95.4% efficiencies, respectively. Furthermore, low-pathogenic HCoV-OC43 coronavirus was eliminated by a ZIF-8-modified mask with 100% efficiency already after 1 h of UV irradiation. As bacteriophage MS2 and HCoV-OC43 coronavirus are commonly used surrogates of the SARS-CoV-2 virus, the revealed antiviral properties of ZIF-8 can represent an important step in designing efficient protective equipment for controlling and fighting the current COVID-19 pandemic.

The purpose of this study was to elucidate the structures and functional properties of tannin- and lignin-derived nano- and microparticles and the coatings prepared from them. Nanoparticles prepared from technical lignins and water-insoluble tannin obtained from softwood bark showed large differences in the suspension testing of antibacterial efficacy against methicillin-resistant Staphylococcus aureus (MRSA) bacteria. A common factor among the most effective lignin nanoparticles was a relatively low molar mass of the lignin, but that alone did not guarantee high efficacy. Tannin nanoparticles showed good antibacterial activity both in suspension testing and as coatings applied onto cellulose. The nanoparticles of nitrogen-modified tannin and the small microparticles of nitrogen-modified kraft lignin exhibited promising flame-retardant parameters when applied as coatings on cellulose. These results illustrate the potential of nano- and microsized particles of unmodified and chemically modified polyphenols to provide functional coatings to cellulosic substrates for environments and applications with high hygiene and fire safety requirements.

A collaborative study with Enterobacteriaceae was conducted to validate Hygicult^® E dipslides by comparison with violet red bile glucose agar (VRBGA) contact plates and swabbing, using stainless steel surfaces artificially contaminated with microbes at various levels. Twelve laboratories participated in the validation procedure. The total number of collaborative samples was 108. The microbial level in each sample was assessed in triplicate by using the 3 above-mentioned methods. No Enterobacteriaceae were used at the low inoculation level. At the middle inoculation level, the percentages detached from the test surfaces were 16.6 with the Hygicult E method, 15.3 with the contact plate method, and 14.6 with swabbing; at the high innoculation level, the percentages were 14.5, 15.8, and 9.8, respectively. The percentage of acceptable results after the removal of outliers was 97.2. Repeatability relative standard deviations ranged from 33.4 to 44.9%; reproducibility relative standard deviations ranged from 45.2 to 77.1%. The Hygicult E dipslide, VRBGA contact plate, and swabbing methods gave similar results at all 3 microbial levels tested: <1.0 colony-forming units (CFU)/cm² at the low level, 1.2–1.3 CFU/cm² at the middle level (theoretical yield 8.0 CFU/cm²), and 1.2–2.0 CFU/cm² at the high level (theoretical yield 12.5 CFU/cm²).