Although graphene has met many of its initially predicted optoelectronic, thermal, and mechanical properties, photodetectors with large spectral bandwidths and extremely high frequency responses remain outstanding. In this work, we demonstrate a >500 gigahertz, flat–frequency response, graphene-based photodetector that operates under ambient conditions across a 200-nanometer-wide spectral band with center wavelengths adaptable from 4200 nanometers. Our detector combines graphene with metamaterial perfect absorbers with direct illumination from a single-mode fiber, which breaks with the conventional miniaturization of photodetectors on an integrated photonic platform. This design allows for much higher optical powers while still allowing record-high bandwidths and data rates. Our results demonstrate that graphene photodetectors can outperform conventional technologies in terms of speed, bandwidth, and operation across a large spectral range.
Phototransistors are light-sensitive devices featuring a high dynamic range, low-light detection, and mechanisms to adapt to different ambient light conditions. These features are of interest for bioinspired applications such as artificial and restored vision. In this work, we report on a graphene-based phototransistor exploiting the photogating effect that features picowatt- to microwatt-level photodetection, a dynamic range covering six orders of magnitude from 7 to 10(7) lux, and a responsivity of up to 4.7 x 10(3) A/W. The proposed device offers the highest dynamic range and lowest optical power detected compared to the state of the art in interfacial photogating and further operates air stably. These results have been achieved by a combination of multiple developments. For example, by optimizing the geometry of our devices with respect to the graphene channel aspect ratio and by introducing a semitransparent top-gate electrode, we report a factor 20-30 improvement in responsivity over unoptimized reference devices. Furthermore, we use a built-in dynamic range compression based on a partial logarithmic optical power dependence in combination with control of responsivity. These features enable adaptation to changing lighting conditions and support high dynamic range operation, similar to what is known in human visual perception. The enhanced performance of our devices therefore holds potential for bioinspired applications, such as retinal implants.
Highly responsive, low noise, and inexpensive photodetectors that operate in the mid‐infrared (MIR) wavelength regime are in high demand for applications ranging from fundamental science to large scale industries. However, simultaneously achieving all this in one device architecture is very challenging. In this work, mercury telluride (HgTe) colloidal quantum dot (cQD) based photodetectors are systematically improved by the introduction of new metamaterial designs. The new designs are found by utilizing simulations. Thereby the structures are optimized to increase the responsivity and simultaneously decrease the noise spectral current density. This is achieved by focusing on improving the photogenerated charge carrier collection efficiency while reducing the active material volume without altering the near unity absorption. A standard metamaterial perfect absorber architecture based on disc resonators is used as a starting point for the optimization process. By optimizing the carrier extraction through contact engineering, resulting in a narrow slot metamaterial, an overall ≈13‐fold responsivity and ≈345‐fold detectivity increase is achieved. The final metamaterial design reaches a responsivity of 16.2 A W−1 and detectivity of 6×108 Jones at a wavelength of 2710 nm. The analysis therefore provides a route to improve the responsivity and noise characteristics of mid‐infrared photodetectors based on cost‐efficient colloidal quantum dots.
Silicon–graphene hybrid photodetectors represent a promising platform by combining graphene’s high carrier mobility and pronounced electrostatic sensitivity with silicon’s superior light absorption capability. However, systematic comparisons of different detection mechanisms in such hybrids remain limited, making it challenging to identify the optimal architecture for different imaging applications. Here, we present a systematic comparison of three photodetection mechanisms in silicon–graphene hybrid photodetectors: interfacial photogating, Schottky photodiodes, and Schottky-assisted photogating. These devices have been implemented on the same chip and evaluated under identical conditions. By analyzing responsivity, noise, dynamic range, speed, and array-level imaging, including crosstalk and pixel variation in 5 × 5 arrays, we identify the key performance trade-offs. Interfacial photogating offers high gain and strong low light sensitivity, Schottky-assisted photogating provides higher gain but larger variability and slower response, while Schottky photodiodes enable fast, low-cross-talk imaging. These insights establish practical guidelines for selecting hybrid silicon–graphene detector architectures based on application-specific performance priorities.
14 June 2026 in ACS Applied Materials & Interfaces
Emerging cryogenic technologies suffer from scaling discrepancies due to limitations stemming from the electrical signal lines connecting the ambient to the cryogenic environment. Currently employed radio frequency cabling offers limited operation bandwidths, therefore requiring large amounts of valuable space and inherently also conducting large amounts of heat. Realizing the ambient-to-cryogenic signal transfer by optical fibers could resolve all of these issues. However, for this purpose, cryogenic-compatible, high-speed, zero-bias-operated photodetectors are required. In this work, we demonstrate a metamaterial-graphene photodetector able to generate high-speed electrical signals in a cryostat without any need for electrical feed lines. This is enabled by a nanostructured metamaterial-graphene architecture that utilizes nanoscale optical hot spots to simultaneously enhance absorption and enable zero-bias carrier extraction. Beyond that, the devices offer high-frequency operations above 100 GHz, a small footprint, and compatibility with various substrates. The signal transfer is further demonstrated by cryogenic optical communication with bit rates of >100 Gbit/s. These results demonstrate a robust platform for high-bandwidth optical-to-electrical conversion, providing a scalable pathway for low-power signal interfacing in next-generation cryogenic systems and quantum technologies.
High-speed, integrated photodetectors are crucial for addressing the bandwidth bottlenecks in next-generation data centers and high-performance computing. While graphene offers exceptional intrinsic speed and broadband absorption, realizing its potential in scalable, high-responsivity integrated devices has proven challenging. Here, we demonstrate a waveguide-integrated plasmonic graphene photodetector architecture capable of operating in high-capacity data links. By utilizing plasmonic resonators to enhance light-matter interaction and facilitate photocarrier extraction, the device exhibits a 3 dB bandwidth of 155 GHz and a responsivity exceeding 200 mA/W in the L-band under bias. We validated the device’s capabilities for high-speed data communications through direct detection of intensity-modulated signals, achieving a single-lane line rate of 192 Gbit/s. To further illustrate the platform’s scalability, we cointegrated eight such photodetectors with a low-crosstalk silicon photonic 1 × 8 arrayed waveguide grating to form a wavelength-division multiplexing receiver. This integrated system yielded an aggregated line rate of 816 Gbit/s. These results, representing the fastest waveguide-coupled plasmonic graphene photodetectors reported to date, pave the way for a new generation of dense, high-capacity optical interconnects essential for future high-performance computing and AI infrastructure.