Today we see an increasing demand for new fluorescent materials exhibiting various sensory abilities due to their broad applicability ranging from the construction of flexible devices to bioimaging. In this paper, we report on the new fluorescent pigments AntTCNE, PyrTCNE, and PerTCNE which consist of 3–5 fused aromatic rings substituted with tricyanoethylene fragments forming D-π-A diad. Our studies reveal that all three compounds exhibit pronounced rigidochromic properties, i.e., strong sensitivity of their fluorescence to the viscosity of the local environment. We also demonstrate that our new pigments belong to a very rare type of organic fluorophores which do not obey the well-known empirical Kasha’rule stating that photoluminescence transition always occurs from the lowest excited state of an emitting molecule. This rare spectral feature of our pigments is accompanied by an even rarer capability of spectrally and temporally well-resolved anti-Kasha dual emission (DE) from both higher and lowest electronic states in non-polar solvents. We show that among three new pigments, PerTCNE has significant potential as the medium-bandgap non-fullerene electron acceptor. Such materials are now highly demanded for indoor low-power electronics and portable devices for the Internet-of-Things. Additionally, we demonstrate that PyrTCNE has been successfully used as a structural unit in template assembling of the new cyanoarylporphyrazine framework with 4 D-π-A dyads framing this macrocycle (Pyr₄CN₄Pz). Similarly to its structural unit, Pyr₄CN₄Pz is also the anti-Kasha fluorophore, exhibiting intensive DE in viscous non-polar medium and polymer films, which strongly depends on the polarity of the local environment. Moreover, our studies showed high photodynamic activity of this new tetrapyrrole macrocycle which is combined with its unique sensory capacities (strong sensitivity of its fluorescent properties to the local environmental stimuli such as viscosity and polarity. Thus, Pyr₄CN₄Pz can be considered the first unique photosensitizer that potentially enables the real-time combination of photodynamic therapy and double-sensory approaches which is very important for modern biomedicine.

Photodynamic therapy (PDT) is a rapidly developing modality of primary and adjuvant anticancer treatment. The main trends today are the search for new effective photodynamic agents and the creation of targeted delivery systems with the function of controlling the release of the agent in the tumor. Recently, the new group of cyanoarylporphyrazine dyes was reported, which combine the properties of photosensitizers and sensors of the local microenvironment. Such unique characteristics allow the release of the photosensitizer from the transport carrier to be assessed in real time in vivo. The aim of the present work was to compare the photophysical and photobiological properties of tetra(2-naphthyl)tetracyanoporphyrazine and its newly synthesized Fe(II) complex. We have shown that the chelation of the Fe(II) cation with the porphyrazine macrocycle leads to a decrease in molar extinction and an increase in the quantum yield of fluorescence and photostability. We demonstrate that the iron cation significantly affects the rate of dye accumulation in cells, the dark toxicity and photodynamic activity, and the direction of the changes depends on the particular cell line. However, in all the cases, the photodynamic index of a metal complex was higher than that of a metal-free base. In general, both of the compounds were found to be very promising for PDT, including for the use with transport delivery systems, and can be recommended for further in vivo studies.

An approach to the formation of anti-icing nanostructured coatings for use on metal to protect against freezing and corrosion of various metal structures was presented in this work. A method for preparing superhydrophobic coatings using the sol-gel compositions with fluorinated dialkoxysilanes and hydrophobized filler was developed. Synthesized methyltriethoxysilane sols were used for film forming compositions by mixing with the fluorine-containing powder and hydrophobizing aerosil. The hydrophobicity and adhesion properties were investigate by physical and chemical methods. The method of digital image processing sedentary drops on the surface was used to study the dynamics of change in contact angles. The adhesion of the coating to the substrate was evaluated by method of a lattice cut and made up 1 point. Determination of physical properties by measuring the contact angles and roll-off of water drops from the surface showed that the coatings have a high contact angle (over 150 °), and the sliding angle less than 10 degrees. That could confirm the superhydrophobicity and assume anti-freezing properties. It was revealed that aerosil has a significant impact to hydrophobic and superhydrophobic properties.

In this paper, we consider a series of new compact A-π-D photoinitiators consisting of donor aromatic fragments (naphthalene, anthracene, phenanthrene, pyrene and perylene) and a strong acceptor tricyanoethylene group—aryltricyanoethylenes (ArTCNEs). Spectral, photophysical, and electrochemical characteristics of ArTCNEs are studied. One-photon (with LED@405 nm) and two-photon (λ = 780 nm, impulse duration of 100 fs) photopolymerization of PETA can be effectively initiated by ArTCNEs with the tertiary amine N,N-dimethylcyclohexylamine DMCHA and/or the iodonium salt diphenyliodonium chloride Iod. Based on results of experiments on photodegradation, photopolymerization and EPR spectroscopy, a photoinitiation mechanism of radical photopolymerization was proposed for two-component (AntTCNE/DMCHA) and three-component (AntTCNE/DMCHA/Iod) initiating systems. The composition containing PerTCNE/DMCHA as a photoinitiator demonstrated the best reactivity under two-photon nanolithography conditions: the polymerization threshold was 2 mW at a laser beam scanning speed of 100 μm/s, and the widest fabrication window of 11 mW was typical for it. As an example, 3D “cage” structures were fabricated using the AntTCNE-based composition, and the test structure resolution parameters, such as the minimum line width and the distance between lines of 80 and 400 nm, respectively, were achieved. MTT experiments with human dermal fibroblasts showed promising preliminary biocompatibility of the resulting polymers, which opens up possibilities for using the obtained materials in biological applications.

In this paper, we consider a series of new compact A-π-D photoinitiators consisting of donor aromatic fragments (naphthalene, anthracene, phenanthrene, pyrene and perylene) and a strong acceptor tricyanoethylene group – aryltricyanoethylenes (ArTCNE). Spectral, photophysical, and electrochemical characteristics of ArTCNE have been studied. One-photon (with LED@405 nm) and two-photon (λ = 780 nm, impulse duration of 100 fs) photopolymerization of PETA can be effectively initiated by ArTCNE with the tertiary amine N,N-dimethylcyclohexylamine DMCHA and/or the iodonium salt diphenyliodonium chloride Iod. Basing on results of experiments on photodegradation, photopolymerization and EPR spectroscopy, a photoinitiation mechanism of radical photopolymerization was proposed for two-component (ArTCNE/DMCHA) and three-component (ArTCNE/DMCHA/Iod) initiating systems. The composition containing PerTCNE/DMCHA as a photoinitiator demonstrated the best reactivity under two-photon nanolithography conditions: the polymerization threshold was 2 mW at a laser beam scanning speed of 100 μm/s, and the widest fabrication window of 11 mW is typical for it. As an example, 3D “cages”-structures were fabricated using the AntTCNE-based composition, and the test structure resolution parameters such as the minimum line width and the distance between lines of 80 and 400 nm, respectively, were achieved. MTT experiments with human dermal fibroblasts showed the non-cytotoxicity of the resulting polymers, which opens up possibilities for using the obtained materials in biological applications.