Carbon–carbon (C/C) composites are attractive materials for high-speed flights and terrestrial atmospheric reentry applications due to their insulating thermal properties, thermal resistance, and high strength-to-weight ratio. It is important to understand the evolving structure–property correlations in these materials during pyrolysis, but the extreme laboratory conditions required to produce C/C composites make it difficult to quantify the properties in situ. This work presents an atomistic modeling methodology to pyrolyze a crosslinked phenolic resin network and track the evolving thermomechanical properties of the skeletal matrix during simulated pyrolysis. First, the crosslinked resin is pyrolyzed and the resulting char yield and mass density are verified to match experimental values, establishing the model's powerful predictive capabilities. Young's modulus, yield stress, Poisson's ratio, and thermal conductivity are calculated for the polymerized structure, intermediate pyrolyzed structures, and fully pyrolyzed structure to reveal structure–property correlations, and the evolution of properties are linked to observed structural features. It is determined that reduction in fractional free volume and densification of the resin during pyrolysis contribute significantly to the increase in thermomechanical properties of the skeletal phenolic matrix. A complex interplay of the formation of six-membered carbon rings at the expense of five and seven-membered carbon rings is revealed to affect thermal conductivity. Increased anisotropy was observed in the latter stages of pyrolysis due to the development of aligned aromatic structures. Experimentally validated predictive atomistic models are a key first step to multiscale process modeling of C/C composites to optimize next-generation materials.
Carbon–carbon composites are a material commonly used in high heat flux heat environments, such as space missions for terrestrial re-entry. Phenolic resins have been used as carbon matrix precursors due to high char yields of 50 – 55%. In this work, molecular dynamics models of a phenolic resin matrix were polymerized and pyrolyzed in the presence of a carbon fiber (CF) surface using experimentally validated protocols to quantify the nanostructural and chemical evolution of the resin matrix as a function of distances from the resin/fiber interface. After pyrolysis, the predicted char yield was 64.2 ± 0.6%, indicating the presence of the CF surface aids in mass retention relative to a model of a pyrolyzed neat phenolic resin. Ring alignment analyses of the evolving pyrolyzed structures showed signs of templating as rings aligned with the CF surface. Filtering out non-aligned rings revealed bands of charred resin matrix equidistant from one another with similar spacing as that of graphene layers in graphite. The methodology presented helps reveal nanolength scale mechanisms of pyrolysis at resin/fiber interfaces and quantifies microstructural changes difficult to observe in situ, which is important to tailor processing parameters and optimize carbon composite manufacturing. Graphical abstract
Glassy carbon (GC) materials demonstrate excellent thermal stability and mechanical response with low mass densities, which makes them excellent candidates for use in ablatives and carbon-carbon composites (C/C composites) used in aerospace and hypersonic vehicle structures. Although GC materials have been in development and use for decades, molecular simulation protocols need to be developed to accelerate the optimization of processing cycles and to drive the development of the next generation of C/C composites. The objective of this research is to establish reactive molecular dynamics (MD) simulation protocols to accurately predict the evolution of the molecular structure and properties of furan resin during polymerization and pyrolysis processes. The polymerization simulation protocols have been validated via comparison of the predicted density and Young’s modulus of furan resin with experimental values. The MD pyrolysis simulations protocols are validated by comparison of calculated density, Young’s modulus, carbon content, sp2 carbon content, the in-plane crystallite size (La), out-of-plane crystallite stacking height (Lc), and inter-planar crystallite spacing (d002) with experimental results from the literature for furan resin derived GC. Simulation parameters, such as temperature and pressure, are optimized within relatively short simulation times (2000 ps), and the predicted structures and mechanical properties are shown to agree with experimental measurements. The modeling methodology established in this work can provide guidance for the development of next-generation C/C composite precursor chemistries for thermal protection systems and other high-temperature applications.
The complex structural and chemical changes that occur during polymerization and pyrolysis critically affect material properties but are difficult to characterize in situ. This work presents a novel, experimentally validated methodology for modeling the complete polymerization and pyrolysis processes for phenolic resin using reactive molecular dynamics. The polymerization simulations produced polymerized structures with mass densities of 1.24 ± 0.01 g/cm3 and Young’s moduli of 3.50 ± 0.64 GPa, which are in good agreement with experimental values. The structural properties of the subsequently pyrolyzed structures were also found to be in good agreement with experimental X-ray data for the phenolic-derived carbon matrices, with interplanar spacings of 3.81 ± 0.06 Å and crystallite heights of 10.94 ± 0.37 Å. The mass densities of the pyrolyzed models, 2.01 ± 0.03 g/cm3, correspond to skeletal density values, where the volume of pores is excluded in density calculations for the phenolic resin-based pyrolyzed samples. Young’s moduli are underpredicted at 122.36 ± 16.48 GPa relative to experimental values of 146 – 256 GPa for nanoscale amorphous carbon samples.