This study presents a first attempt toward the rational design of bamboo multiculm axial members with dowel-type connections. Specifically, it implements an original combination of grading, use of multiple culms, and capacity design principles to manage the natural variability of bamboo culms and establish a reliable ductile failure. In this context, the study also calibrates the pertinent overstrength factors needed for achieving capacity-based design. The proposed axial members display high ductility and predictability owing to dowel yielding before the other components, i.e., the steel gusset plates and the bamboo culms fail. Furthermore, arranging bolts along two perpendicular planes of the circular cross-section of bamboo culms increases efficiency and offers notable gains in strength over a single plane bolt configuration. The characteristic values of average material/geometric properties of multiculm members estimated from single-culm material tests can predict the experimental 5th percentile yielding of dowel connections with accuracy. Overall, the proposed approach results in reliable multiculm bamboo axial members and shows promise toward a rational engineered design of bamboo structures.
The escalating global demand for sustainable and disaster-resilient housing has renewed interest in bamboo-based construction systems, particularly composite bamboo shear wall (CBSW) panels as low-carbon alternatives to conventional materials. Despite their potential, systematic data on the shear performance of such panels remains limited, especially regarding the influence of cross-bracing on strength, stiffness, ductility, dissipated energy, and damage behavior under lateral loading. This study addresses this gap through experimental characterization of full-scale CBSW panels. Two configurations, with (WT1) and without (WT2) flat steel bar cross-bracing, were tested under monotonic and cyclic loading. WT1 panels consistently exhibited a higher characteristic shear strength and capacity, and initial stiffness than WT2. WT2 panels showed greater ductility through more distributed deformation. Both configurations displayed gradual strength deterioration post-peak. The Energy Equivalent Elastic–Plastic (EEEP) method yielded higher and more conservative estimates of yield load and displacement compared to the conventional approach. These findings demonstrate that CBSW panels, particularly WT1, offer viable lateral resistance for low-rise structures in seismic-prone regions.
3 March 2026 in Advances in Structural Engineering
Bolted bamboo connections are ubiquitous in contemporary bamboo structures, yet their performance remains under-researched—particularly in configurations without cement mortar infill. This study investigates the structural behaviour of a T-shaped fish-mount joint, commonly used to connect two angled bamboo members. The joint consists of two culms connected using through-culm threaded rods—one straight and one with a hooked end. A critical loading scenario arises when the threaded rod is pulled through the bamboo, causing the washer to bear against the outer culm wall. To simulate this, the study replicates the failure mechanism by pushing the rod inward, effectively assessing the rod pull-in capacity. In this context, the study tests one hundred connection specimens made of Bambusa blumeana bamboo poles and threaded rods of 8 mm and 12 mm in diameter, with corresponding nuts and washers. From the experimental results, it then develops three predictive models for estimating maximum capacity: (1) a dimensional analysis model, (2) a regression-based model, and (3) a bending-perpendicular-to-fibre model. Among these, the dimensional analysis model based on bamboo density, culm diameter, and wall thickness demonstrates the best performance, offering a simple, unit-consistent formulation with a strong fit ( ). Accordingly, the dimensional analysis model is further developed into a practical design formula aligned with the structural bamboo design code ISO 22156:2021, enabling engineers to apply it directly in the design of bolted bamboo connections.