Qingdong Yan

Prof. Qingdong Yan


Research Focus & Metrics

Academic Career Length

15Years (2012-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 December 2024 in Drones
Verified
Journal Article
Open access
PDF file
WWWei Wei
Wei Wei
YMYuanqing Ma
Yuanqing Ma
SWShiyi Wei
Shiyi Wei
DWDongsheng Wang
Dongsheng Wang
Meng GuoMeng Guo
Meng Guo
QYQingdong Yan
Qingdong Yan
Toroidal propellers, a new type of drone propellers capable of significantly reducing noise, offer new possibilities for future low-altitude flying platforms. In this study, a numerical model was established to analyze the aerodynamic noise of the toroidal propeller under normal atmospheric conditions. The aerodynamic calculations for the toroidal and benchmark propellers were performed to obtain noise source information using a transient large eddy simulation. The hybrid computational aeroacoustic method was employed to calculate the noise spectrum at different speeds and locations. Moreover, an experimental system for propellers was designed and built within an anechoic chamber to investigate the aerodynamic performance and noise characteristics at various speeds. The noise reduction effect of the toroidal propeller compared to the benchmark propeller was analyzed, taking into account the sound pressure level, lift coefficient, and figure of merit. At the same thrust level, the lift coefficient of the toroidal propeller increased by 187% relative to the benchmark propeller. The radial and axial sound pressure levels decreased by 5.2 dB(A) and 19.6 dB(A), respectively. The toroidal propeller significantly reduced noise while improving aerodynamic performance. This study provides a theoretical basis, experimental methods, and data support for the aerodynamic and noise calculations of toroidal propellers. It has significant engineering implications for the development of low-noise propellers for drones.

1 January 2014 in Chinese Journal of Mechanical Engineering
Verified
Journal Article
Closed access
PDF file
HCHongwei Cui
Hongwei Cui
SYShouwen Yao
Shouwen Yao
QYQingdong Yan
Qingdong Yan
SFShanshan Feng
Shanshan Feng
QLQian Liu
Qian Liu
The current design of hydro-viscous clutch(HVC) in tracked vehicle fan transmission mainly focuses on high-speed and high power. However, the fluid torque under the influence of fluid temperature can not be predicted accurately by conventional mathematical model or experimental research. In order to validate the fluid torque of HVC by taking the viscosity-temperature characteristic of fluid into account, the test rig is designed. The outlet oil temperature is measured and fitted with different rotation speed, oil film thickness, oil flow rate, and inlet oil temperature. Meanwhile, the film torque can be obtained. Based on Navier-Stokes equations and the continuity equation, the mathematical model of fluid torque is proposed in cylindrical coordinate. Iterative method is employed to solve the equations. The radial and tangential speed distribution, radial pressure distribution and theoretical flow rate are determined and analyzed. The models of equivalent radius and fluid torque of friction pairs are introduced. The experimental and theoretical results indicate that tangential speed distribution is mainly determined by the relative rotating speed between the friction plate and the separator disc. However, the radial speed distribution and pressure distribution are dominated by pressure difference at the lower rotating speed. The oil film fills the clearance and the film torque increases with increasing rotating speed. However, when the speed reaches a certain value, the centrifugal force will play an important role on the fluid distribution. The pressure is negative at the outer radius when inlet flow rate is less than theoretical flow, so the film starts to shrink which decreases the film torque sharply. The theoretical fluid torque has good agreement with the experimental data. This research proposes a new fluid torque mathematical model which may predict the film torque under the influence of temperature more accurately.

16 February 2017 in Journal of Fluids Engineering
Verified
Journal Article
Closed access
PDF file
CLCheng Liu
Cheng Liu
WWWei Wei
Wei Wei
QYQingdong Yan
Qingdong Yan
BWBrian K. Weaver
Brian K. Weaver
Heavy cavitation in torque converters can have a significant effect on hydrodynamic performance, particularly with regards to the torque capacity. The objective of this study is to therefore investigate the effects of pump and turbine blade geometries on cavitation in a torque converter and improve the torque capacity without increasing the torus dimension. A steady-state homogeneous computational fluid dynamics (CFD) model was developed and validated against test data at stall operating condition. A full flow passage with a fixed turbine-stator domain was used to improve the convergence and accuracy of the cavitation model. Cavitation analysis was carried out with various pump and turbine blade geometries. It was found that there is a threshold point for pump blade exit angle in terms of its effect on torque capacity due to heavy cavitation. Further increasing the pump blade exit angle past this point will worsen cavitation condition and decrease torque capacity. The study also shows that a higher turbine blade exit angle, i.e., lower stator incidence angle, could reduce flow separation at the stator suction surface and consequently abate cavitation. A base high-capacity torque converter was upgraded utilizing the cavitation model, and the resulting design exhibited a 20.7% improvement in capacity constant without sacrificing other performance metrics.

23 November 2017 in Journal of Fluids Engineering
Verified
Journal Article
Closed access
PDF file
CLCheng Liu
Cheng Liu
WWWei Wei
Wei Wei
QYQingdong Yan
Qingdong Yan
BWBrian K. Weaver
Brian K. Weaver
HWHouston G. Wood
Houston G. Wood
Cavitation in torque converters may cause degradation in hydrodynamic performance, severe noise, or even blade damage. Researches have highlighted that the stator is most susceptible to the occurrence of cavitation due to the combination of high flow velocities and high incidence angles. The objective of this study is to therefore investigate the effects of cavitation on hydrodynamic performance as well as the influence of stator blade geometry on cavitation. A steady-state homogeneous computational fluid dynamics (CFD) model was developed and validated against test data. It was found that cavitation brought severe capacity constant degradation under low-speed ratio (SR) operating conditions and vanished in high-speed ratio operating conditions. A design of experiments (DOE) study was performed to investigate the influence of stator design variables on cavitation over various operating conditions, and it was found that stator blade geometry had a significant effect on cavitation behavior. The results show that stator blade count and leaning angle are important variables in terms of capacity constant loss, torque ratio (TR) variance, and duration of cavitation. Large leaning angles are recommended due to their ability to increase the cavitation number in torque converters over a wide range of SRs, leading to less stall capacity loss as well as a shorter duration of cavitation. A reduced stator blade count is also suggested due to a reduced TR loss and capacity loss at stall.

23 January 2022 in Machines
Verified
Journal Article
Open access
PDF file
Meng GuoMeng Guo
Meng Guo
CLCheng Liu
Cheng Liu
QYQingdong Yan
Qingdong Yan
WWWei Wei
Wei Wei
BKBoo Cheong Khoo
Boo Cheong Khoo
Hydraulic torque converter is a kind of high speed rotating machine using viscosity hydraulic oil as working medium, and its internal flow field is very complex. Thereby cavitation can occur easily in the working process, resulting in severe degradation of torque converter performance, noise, vibration and even failure. In order to reveal the effect of rotating speeds on the cavitation characteristics, a full flow passage geometry and a computational fluid dynamics (CFD) model with cavitation were developed to analyze the flow behavior in the torque converter. The results show that cavitation occurs when the speed difference between pump and turbine exceeds 1400 rpm for the basic model torque converter, which could be used as a useful indicator for the occurrence and degree of severity of flow cavitation. The increase of pump rotating speed or the decrease of speed ratio will intensify cavitation, which reduces the hydraulic transmission capacity and efficiency by over 20%, and seriously alters the shape, size, vapor volume fraction and region of cavitation bubbles. In extreme cases, more than 80% of the area on the suction side of the stator blade could be covered by cavitation bubbles. Moreover, the increase of pump rotating speed also changes the critical cavitation number and extends the cavitation range towards high speed ratio conditions not previously affected. These findings can provide guidance on how to choose the operating conditions of the hydraulic torque converter and how to improve its hydrodynamic performance and stability.

7 January 2019 in International Journal of Numerical Methods for Heat & Fluid Flow
Verified
Journal Article
Closed access
CLCheng Liu
Cheng Liu
WWWei Wei
Wei Wei
QYQingdong Yan
Qingdong Yan
BWBrian K. Weaver
Brian K. Weaver
HWHouston G. Wood
Houston G. Wood
Purpose: The purpose of this paper is to study the transient cavitation process in torque converters with a particular focus on cavitation suppression with a passive flow control technique. Design/methodology/approach: The transient fluid field in a torque converter was simulated by RANS-based computational fluid dynamics (CFD) in a full three-dimensional (3D) model. A homogeneous Rayleigh–Plesset cavitation model was used to simulate the transient cavitation process and the results were validated with test data. Various secondary flow passages (SFP) were applied to the stator blade. The cavitation behavior and hydrodynamic performance were simulated and compared to investigate the effect of SFP geometries on cavitation suppression. Findings: Presented results show that cavitation in the torque converter is highly unstable at stall operating condition because of the combination of a high incidence angle and high flow velocity. The addition of an SFP to the stator blade produces a disruption of the re-entrant jet and reduces the overall degree of cavitation, consequently inhibiting the unstable cavitation and reducing performance degradation. Originality/value: This paper provides unique insights into the complicated transient cavitation flow patterns found in torque converters and introduces effective passive flow control techniques useful to researchers and engineers in the areas of fluid dynamics and turbomachinery.