The cross section of thermoplastic composite pipes (TCPs) consists of three layers: an inner liner, reinforcement laminates, and an outer jacket; the three layers are fully bonded together to form a solid-walled structure. In this study, the mechanical behaviors of TCPs under internal pressures were investigated using analytical and finite element analysis (FEA) methods. The analytical method that is based on the three-dimensional (3D) anisotropy elastic theory takes into account the nonuniform distribution of stresses and strains through the wall thickness of the pipe. FEA models were setup using the software abaqus to predict the stress distribution of a TCP. The 3D Tsai-Wu failure criterion was used to predict the maximum burst pressure of TCPs. Effects of winding angles and the number of reinforcement plies on the burst pressure of TCPs were studied. Results derived from the analytical method and the FEA method verified each other, which show that the burst pressure of a TCP increases asymptotically as the number of reinforcement plies increases. The optimal winding angle associated with the maximum burst pressure is not a constant value, instead, it varies as the thickness of the laminate layer increases. This study provides useful tools and guidance for the design and analysis of TCPs, while further validation experiments are still needed.
Flexible cylinders, such as marine risers, often experience sustained vortex-induced vibrations (VIVs). Installing helical strakes on a riser is the most widely used technique to mitigate VIVs. This study was inspired by the giant Saguaro Cacti which can withstand strong wind with a shallow root system. In this study, numerical simulations of flow past a stationary cylinder of a cactus-shaped cross-section in a two-dimensional flow field at a subcritical Reynolds number of 3900 were performed. Results show that cylinders of a cactus-shaped cross-section have a lower lift coefficient without increasing drag compared to those of a circular cylinder. VIV experiments on a single flexible pipe as well as on a set of two tandem-arranged flexible pipes were conducted at different reduced velocities to investigate the effects of the streamwise spacing and wake of the cactus-like body shape on VIV mitigation. Experimental results show that the cactus-like body shape can mitigate VIV responses of the cylinder at upstream position with no cost of increased drag; however, similar to helical strakes, the efficiency of VIV mitigation for the cylinder at downstream position is reduced. Although the cactus-like body shapes tested in this study were not optimized for oscillation suppression, still this study suggests that modification of the cross-sectional shape to a well-designed cactus-like shape has potentials to be used as an alternative technology to mitigate VIV of marine risers.