Among all known inorganic pollutants of wastewater and natural water, iron compounds are the most common that adversely affect water bodies, different living organisms and human beings. Before discharging the sewage into water bodies, it is important to remove iron ions from wastewater. The...
1 March 2021 in Ecological Engineering & Environmental Technology
Iron is one of the most common components in water that adversely affect humans, other living organisms and parameters of water bodies. Therefore, during using and consuming natural waters, and discharging sewage into surface water bodies, it is necessary to remove iron compounds from the aquatic...
Technology has been developed for the production of fluxed local sinter and pellets with residual carbon for blast-furnace use. The new products have better metallurgical characteristics than existing materials.
The effective blast-furnace smelting of iron requires the use of uniform fluxed iron ore in sintered form—local cakes produced by the production of pellets with a high content of iron and residual...
7 February 2020 in Ferrous Metallurgy. Bulletin of Scientific , Technical and Economic Information
In the production of iron ore pellets, binding additives are used, in particular, bentonite clays. At present, instead of alkaline bentonite clays used before, the alkaline-earth bentonite clays modified by soda ash are used, supplied from abroad. There is a whole number of bentonite clays deposits in Russia and Ukraine having reserves of the raw material accounting hundreds of million tons, which are not used in the industry because of absence of planned and proper studies of their applicability for pellets production. The analysis of chemical composition carried out and requirements to rheological characteristics of bentonite clays used in the iron ore pellets production at steel-works of Russia and Ukraine determined. Indicators of swelling and water absorption of mono-ionic forms of bentonite of some deposits in water of various hardness presented. Quality of pellets with bentonites, having different exchange complex when using technical water of various hardness considered. Analysis of mineralogical and chemical compositions, as well as value and content of exchange complex of alkaline-earth bentonite clays of Cherkassk deposition, Ukraine, accomplished. The deposition has the largest reserves of such clays in CIS. It was shown, that clays suitable for pellets production, are located near the earth surface. Comparative analysis of strength indicators of pellets, produced with bentonite application with alkaline and alkaline-earth complexes, carried out. It was shown, that despite the low swelling of alkaline-earth bentonites, the quality of pellets, produced with those bentonites is sometimes a little lower, but under definite conditions does not yield to the quality of pellets with alkaline bentonites at the same their consumption.
A production technology for iron-ore materials with improved metallurgical characteristics is developed and tested. The following materials are considered: fluxed pellets containing residual carbon; fluxed local agglomerates from concentrates with a wide range of silica content; local agglomerates with an elevated iron content; local agglomerates with residual carbon; and local agglomerates with both elevated iron content and residual carbon.